start stop button Lexus IS220d 2011 User Guide

356
3-6. Using the storage features
IS250/220d/200d_EE
Glove box
Open (push button)
Lock with the mechanical
key
Unlock with the mechanical
key
Console boxes
Front
Pull up the knob to release
the lock.
Slide the armrest.
Pull up the knob to release
the lock.
Lift the armrest to open.
Glove box light
The glove box light turns on when the “ENGINE START STOP” switch is
in IGNITION ON mode.
Trunk opener main switch
The trunk opener main switch is located in the glove box. (P. 6 4 )
CAUTION
Caution while driving
Keep the glove box closed.
Injuries may result in the event of an accident or sudden braking.
Glove box and console boxes

357
3-6. Using the storage features
3
Interior features
IS250/220d/200d_EERear (if equipped)
Press the button to release the
lock.
Lift the armrest to open.
Console box light (front)
The console box light turns on when the “ENGINE START STOP” switch is
in IGNITION ON mode.
Using the front console box to store CD cases
CAUTION
Caution while driving
Keep the console box closed.
Injuries may result in the event of an accident or sudden braking.
Store a CD case with the hinged portion
facing either the front or back of the con-
sole box.
Console boxes

411
4-3. Do-it-yourself maintenance
4
Maintenance and care
IS250/220d/200d_EE
Engine oil consumption
The amount of engine oil consumed depends on the oil viscosity, the
quality of the oil and the way the vehicle is driven.
More oil is consumed under driving conditions such as high speeds and
frequent acceleration and deceleration.
A new engine consumes more oil.
When judging the amount of oil consumption, keep in mind that the oil
may have become diluted, making it difficult to judge the true level
accurately.
Oil consumption: Max. 1.0 L per 1,000 km (1.1 qt./600 miles, 0.9 Imp.
qt./600 miles)
If your vehicle consumes more than 1.0 L (1.1 qt., 0.9 Imp. qt.) every
1000 km (600 miles), contact any authorized Lexus dealer or repairer, or
another duly qualified and equipped professional.
After changing the engine oil (IS220d and IS200d)
The oil change system should be reset. Perform the following procedures:
Switch the display to the odometer (P. 171) when the engine is
running.
Turn the “ENGINE START STOP” switch OFF.
While pressing the trip meter reset button, set the “ENGINE
START STOP” switch to IGNITION ON mode (but do not start the
engine because otherwise the reset mode will be cancelled). Con-
tinue to press and hold the button until the trip meter displays
“000000”.
STEP1
STEP2
STEP3

5
531
5-2. Steps to take in an emergency
When trouble arises
IS250/220d/200d_EE
If you run out of fuel and the engine stalls (IS220d and IS200d)
NOTICE
When restarting the engine
Do not crank the engine before refueling and priming the fuel system. This
may damage the engine and fuel system.
If you run out of fuel and the engine dies:
Refuel your vehicle.
Prime the fuel system by
using the satellite switches.
Push “” or “” to select prim-
ing operation mode. ( )
Press the “ON/OFF” button to
select “ON”. ( )
The priming operation will
start.
Wait for 1 minute and start the engine. (P. 156)
The priming operation will automatically stop when the engine
starts.
If the engine does not start after the above steps performed,
wait for 10 seconds and try step 2 and step 3 again. If the
engine still does not start, contact any authorized Lexus dealer
or repairer, or another duly qualified and equipped profes-
sional.
fihidhl dllihl
STEP1
STEP2
STEP3