Lexus IS220d 2012 Owner's Manual
IS220d 2012
Lexus
Lexus
https://www.carmanualsonline.info/img/36/29716/w960_29716-0.png
Lexus IS220d 2012 Owner's Manual
Page 469 of 609
448
4-3. Do-it-yourself maintenance
IS250/220d/200d_EELeft side instrument panel
FuseAmpereCircuit
1FR P/SEAT LH30 APower seat
2A/C7.5 AAir conditioning system
3MIR HTR15 AOutside rear view mirror defoggers
4TV NO.110 ADisplay
5FUEL OPEN10 AFuel filler door opener
6TV NO.27.5 ALexus parking assist monitor
7PSB30 APre-crash seat belt
8S/ROOF25 AMoon roof
9TA I L10 ATail lights, license plate lights,
manual headlight leveling system
10PANEL7.5 A
Switch illumination, air condition-
ing system, display, audio, power
heater
11RR FOG7.5 ARear fog lights
12ECU-IG LH10 A
Air conditioning system, cruise
control, power steering, rain sen-
sor, anti-glare inside rear view mir-
ror, shift lock system, moon roof,
VSC, windshield wiper, Lexus
parking assist-sensor
13FR S/HTR LH15 ASeat heaters and ventilators
14RR DOOR LH20 APower windows
Page 471 of 609
450
4-3. Do-it-yourself maintenance
IS250/220d/200d_EERight side instrument panel
FuseAmpereCircuit
1FR P/SEAT RH30 APower seat
2DOOR DL15 APower door lock system
3OBD7.5 AOn-board diagnosis system
4STOP SW7.5 A
Stop lights, multiport fuel injection
system/sequential multiport fuel
injection system, VDIM, shift lock
system, high mounted stop light
5TI & TE20 A
Electric tilt and telescopic steering
column, multiplex communication
system
6RAD NO.310 AAudio
7GAUGE7.5 AMeter
8IGN10 A
SRS airbag system, steering lock
system, multiport fuel injection
system/sequential multiport fuel
injection system, stop lights
Page 472 of 609

451
4-3. Do-it-yourself maintenance
4
Maintenance and care
IS250/220d/200d_EE
9ACC7.5 A
Clock, audio, navigation system,
outside rear view mirrors, smart
entry & start system, Lexus park-
ing assist monitor, glove box light,
console box light, multiplex com-
munication system, display
10CIG15 ACigarette lighter
11PWR OUTLET15 APower outlet
12RR DOOR RH20 APower windows
13FR DOOR RH20 A
Power windows, outside rear view
mirrors, multiplex communication
system
14AM27.5 ASmart entry & start system
15RH-IG7.5 A
Seat belts, automatic transmis-
sion, seat heaters and ventilators,
windshield wiper de-icer, power
heater
16FR S/HTR RH15 ASeat heaters and ventilators
17ECU-IG RH10 A
Power seat, headlights, front fog
lights, front position lights, license
plate lights, windshield washer,
outside rear view mirror, VDIM,
air conditioning system, pre-crash
seat belt, electric tilt and telescopic
steering column, power windows,
navigation system, vehicle stabil-
ity control, multiplex communica-
tion system, smart entry & start
system
FuseAmpereCircuit
Page 475 of 609
454
4-3. Do-it-yourself maintenance
IS250/220d/200d_EE
Replacing light bulbs
Headlight low beams (vehicles with halogen bulbs)
Release the lock and remove
the cover.
Turn the bulb base counter-
clockwise.
Rear bulb locations
Rear fog lightRear turn signal
Back-up light
STEP1
STEP2
Page 476 of 609
455
4-3. Do-it-yourself maintenance
4
Maintenance and care
IS250/220d/200d_EEUnplug the connector while
pulling the lock release.
Headlight high beams (vehicles with halogen headlights)
Release the lock and remove
the cover.
Turn the bulb base counter-
clockwise.
Unplug the connector while
depressing the lock release.
STEP3
STEP1
STEP2
STEP3
Page 477 of 609
456
4-3. Do-it-yourself maintenance
IS250/220d/200d_EEHeadlight high beams (vehicles with discharge headlights)
Turn the cover counterclock-
wise and remove it.
Turn the bulb base counter-
clockwise.
Unplug the connector while
pulling the lock release.
STEP1
STEP2
STEP3
Page 478 of 609
457
4-3. Do-it-yourself maintenance
4
Maintenance and care
IS250/220d/200d_EEFront position lights (vehicles with halogen headlights)
Release the lock and remove
the cover.
Turn the bulb base counter-
clockwise.
Remove the light bulb.
STEP1
STEP2
STEP3
Page 479 of 609
458
4-3. Do-it-yourself maintenance
IS250/220d/200d_EEBack-up lights and rear fog lights
Open the trunk door and
remove the trunk panel cover
clips.
Partly remove the trunk panel
cover and turn the bulb bases
counterclockwise.
Rear fog light
Back-up light
Remove the light bulb.
Rear fog light
Back-up light
Rear turn signal lights
Open the trunk door and
remove the cover.
STEP1
STEP2
STEP3
STEP1
Page 480 of 609
459
4-3. Do-it-yourself maintenance
4
Maintenance and care
IS250/220d/200d_EETurn the bulb base counter-
clockwise.
Remove the light bulb.
Bulbs other than the above
If any of the bulbs listed below has burnt out, have it replaced by
any authorized Lexus dealer or repairer, or another duly quali-
fied and equipped professional.
Headlight high and low beams (discharge bulbs)
Front fog lights
Front turn signal lights
Side turn signal lights
Stop/tail lights
Tail lights
High mounted stoplight
License plate lights
Daytime running lights
Front position lights (vehicles with discharge headlights)
STEP2
STEP3
Page 482 of 609

461
4-3. Do-it-yourself maintenance
4
Maintenance and care
IS250/220d/200d_EE
CAUTION
Replacing light bulbs
Turn off the headlights. Do not attempt to replace the bulb immediately
after turning off the headlights.
The bulbs become very hot and may cause burns.
Do not touch the glass portion of the light bulb with bare hands. Hold the
bulb by the plastic or metal portion.
If the bulb is scratched or dropped it may blow out or crack.
Fully install light bulbs and any parts used to secure them. Failing to do so
may result in heat damage, fire, or water entering the headlight unit. This
may damage the headlights or cause condensation to build up on the lens.
Discharge headlights (if equipped)
Contact any authorized Lexus dealer or repairer, or another duly qualified
and equipped professional, before replacing discharge headlights (includ-
ing light bulbs).
Do not touch the high-intensity discharge headlight’s high voltage socket
when the headlights are turned on.
An extremely high voltage of 20000 V will be discharged and could result
in serious injury or death by electric shock.
Do not attempt to take apart or repair the low beam discharge headlight
bulbs, connectors, power supply circuits, or related components.
Doing so could result in electric shock and serious injury or death.
To prevent damage or fire
Make sure bulbs are fully seated and locked.