reset Lexus IS250 2006 Using the audio system / LEXUS 2006 IS350/250 QUICK REFERENCE GUIDE

Topic 3
When Driving
25
Dynamic Radar Cruise Control (If Equipped)
■Cruise control display
Cruise control settings are shown on the multi-
information display.
Vehicle ahead indicator
Vehicle-to-vehicle distance
Preset speed
■Vehicle-to-vehicle distance control mode
Press the ON-OFF button.
Accelerate or decelerate to the desired
speed, and then push the lever down.
Following distance can be adjusted using the
vehicle-to-vehicle dist ance control switch.
■Conventional (constant speed) cruise control mode
Press the ON-OFF button.
Push the lever forward and hold for at least
one second.
Accelerate or decelerate to the desired
speed, and then push the lever down.
■Canceling
To temporarily cancel the dynamic radar cruise
control, pull the lever.
To turn the system off, press the ON-OFF button.
■Adjusting the speed setting
To increase speed : push the lever up.
To decrease speed : push the lever down.
Release the lever when the desired speed is
reached.
Dynamic radar cruise control supplements conventional cruise control with a vehicle-to-
vehicle distance control mode.
1
2
3
The vehicle-to-vehicle distance control mode maintains the pr eset cruising speed as long
as no vehicle is detected ahead.

Topic 5
Driving Comfort
31
Audio System (without navigation system)
Owners of models equipped with a navigation system should refer to the “Navigation System
Owner's Manual”.
■Basic operation
Sound quality modes
Listening position (if equipped)
ASL (Automatic Sound Levelizer)
Audio sources
Power/Volume
■Audio sources
AMS AT: AM radio/Satellite radio*
FM: FM radio
DISC
AUX: CD player/Auxiliary audio device
*:
The optional Lexus genuine satellite tuner and antenna allows you to receive and play
XM satellite radio broadcasts. (Subscription is required. For detailed information, see
the Owner’s Manual.)
■ Radio
Traffic information
Station presets
Text messages
Radio tuner
RDS genre select
Scan
All radio stations: press
Preset radio stations: press and hold
Seek
■Entering station presets
Select the desired station by using th e tune, the seek or the scan function.
Press and hold one of the preset buttons (1~6) until you hear a beep, indicating that the
station is set.
1
2
3
4
5
1
2
3
4
5
6
7