clock Lexus IS250 2009 Navigation Manual

Finish
AUDIO/VIDEO SYSTEM
195
D
Listening to the radio
Push these buttons to choose either an
AM or FM station.
“AM”, “FM1” or “FM2” appears on the
screen.
If your vehicle is equipped with a satellite
radio broadcast system, when you push
the “AM·SAT” button, “AM”, “SAT1”,
“SAT2”, “SAT3” station appears on the dis-
play. For details about satellite radio
broadcast, see “— Radio operation (XM
r
Satellite Radio broadcast)” on page 199.
Turn the knob clockwise to step up the
station band or counterclockwise to
step down.
Your radio automatically changes to stereo
reception when a stereo broadcast is re-
ceived. “ST” appears on the screen. If the
signal becomes weak, the radio reduces
the amount of channel separation to pre-
vent the weak signal from creating noise.
If the signal becomes extremely weak, the
radio switches from stereo to mono recep-
tion. In this case, “ST” disappears from the
screen.
IS F/350/250_Navi_U
(L/O 0808)
— Radio operation

Finish
APPENDIX
305
There are two types of areas available
for route guidance. In one type of area,
primarily around metropolitan centers,
detailed route guidance is available for
the entire area. In the other type of area,
all roads are displayed on the map but
route guidance is limited. The naviga-
tion route might lack precision because
the data (no right turns, one−way traf-
fic, etc.) is not complete. It is still pos-
sible to reach the destination by follow-
ing the arrow direction and distance as
shown on the bottom left of the screen.
The arrow points in the direction of the
destination. The distance shown is as
measured in a straight line from the cur-
rent vehicle position to the destination
area.
In order to provide you with as accurate
map information as possible, we are al-
ways gathering information such as on
road repairs and carrying out on −site in-
vestigations. However, the names of
roads, streets, facilities, and their locations
frequently change. In some places,
construction on roads may be in progress.
For that reason, information on some
areas in this system might be different from
the actual location.
The map database is normally updated
once a year. Contact your Lexus dealer for
information about the availability and pric-
ing of an update. When changing the map DVD
−ROM, we
recommend using your Lexus dealer.
To change the map DVD −ROM yourself,
follow these instructions carefully.
Do not use any tolls other than in −vehicle
tools.
For the storage location of the in −vehicle
tools, refer to the “Owner’s Manual” .
1. Set the “ENGINE START STOP”
switch in ACCESSORY mode.
2. Insert the 2 picks provided in the in−
vehicle tools into the holes on both
sides of the clock panel at a slight out-
ward angle until you hear a “click”. Re-
move the panel.
Do not break the connecter of the clock
panel.
IS F/350/250_Navi_U
(L/O 0808)
— Changing the map
DVD− ROM

Finish
APPENDIX
306
3. Push the “MENU” button.
4. Touch “Map DVD”.
5. Touch “DVD” to eject the map
DVD− ROM.
6. Insert the new map DVD −ROM with
the label side up.
7. Install the panel.
NOTICE
DTo protect from damage, when re-
moving the clock panel, use pro-
tective tape in the positions illus-
trated.
DNever remove the clock panel, ex-
cept when changing the map DVD−
ROM.
DIf you are unable to remove the
clock panel easily, stop immediate-
ly and ask for assistance at your
Lexus dealer.
DEjecting the map DVD− ROM with
the clock panel installed will cause
the disc to contact the panel, and
may result in a malfunction.
IS F/350/250_Navi_U
(L/O 0808)