Lexus IS250 2012 Navigation Manual

NAVIGATION SYSTEM: MEMORY POINTS
120
D
To change “Name”
1. Touch “Edit” of “Name”.
2. Enter the name using the alphanu-
meric keys.
Up to 32 characters can be entered.
3. Touch “OK”.
The previous screen will be displayed.
DISPLAYING MEMORY POINT NAMES
The name of an address book entry can be
set to display on the map.
To show the name, touch “On” on the
“Edit Address Book Entry” screen. To
not show it, touch “Off”.
ISF/IS NAVI (U)
Finish

NAVIGATION SYSTEM: MEMORY POINTS
121
D
To change “Location”
1. Touch “Edit” of “Location”.
2. Touch one of the 8 directional but-
tons to move the cursorto the de-
sired point on the map.
3. Touch “OK”.
The previous screen will be displayed.
DTo change “Phone #” (telephone
number)
1. Touch “Edit” of “Phone #”.
2. Enter the number using number
keys.
3. Touch “OK”.
The previous screen will be displayed.
ISF/IS NAVI (U)
Finish
4

NAVIGATION SYSTEM: MEMORY POINTS
122
(c) Deleting address book entries
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Address Book” on the “Nav-
igation Settings” screen.
4. Touch “Delete”.
5. Touch the button to be deleted.
“Select All”:To select all addresses in the
address book.
“Unselect All”: To unselect all of the se-
lected addresses.
6. Touch “Delete”.
7. To delete the address book entry,
touch “Yes”. To cancel the deletion,
touch “No”. Areas you want to avoid because of traffic
jams, construction work or other reasons
can be registered as areas to avoid.
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Areas to Avoid”.
DRegistering areas to avoid (See
page 123.)
DEditing areas to avoid (See page
124.)
DDeleting areas to avoid (See page
127.)
ISF/IS NAVI (U)
Finish
— Setting up the “Areas to
Avoid”

NAVIGATION SYSTEM: MEMORY POINTS
123
(a) Registering areas to avoid
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Areas to Avoid” on the “Nav-
igation Settings” screen.
4. Touch “New”.
5. Enter the location in the same way
as for a destination search, or display
the map of the area to be avoided.(See
“Destination search” on page 62.)
6. Scroll the map to the desired point.
“Adjust Location” : To adjust the position
in smaller increments.
7. Touch “Enter”.
8. Touch eitherorto
change the size of the area to be
avoided.
9. Touch “OK”.
INFORMATION
D If a destination is input in the area
to avoid or the route calculation
cannot be made without running
through the area to avoid, a route
passing through the area to be
avoided may be shown.
D Up to 10 locations can be regis-
tered as points/areas to avoid.
ISF/IS NAVI (U)
Finish
4

NAVIGATION SYSTEM: MEMORY POINTS
124
(b) Editing area to avoid
The name, location and/or area size of a
registered area can be edited.
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Areas to Avoid” on the “Nav-
igation Settings” screen.
4. Touch “Edit”.
5. Touch the desired area button.
6. Touch “Edit” for the item you want to
change.
“Name”: To edit the name of the area to
avoid. The names can be displayed on the
map. (See page 125.)
“Location”: To edit area location. (See
page 126.)
“Size”: To edit area size. (See page 126.)
“Active”: To turn on or off the area to avoid
feature. To turn on the feature, touch“On”
on the “Edit Area to Avoid” screen. To turn
off the feature, touch “Off”on the “Edit
Area to Avoid” screen.
7. Touch “OK”.
ISF/IS NAVI (U)
Finish

NAVIGATION SYSTEM: MEMORY POINTS
125
D
To change “Name”
1. Touch “Edit” of “Name”.
2. Enter the name using alphanumeric
keys.
Up to 32 characters can be entered.
3. Touch “OK”.
The previous screen will be displayed.
DISPLAYING NAMES OF AREAS TO BE
AVOIDED
The name of an area to be avoided that
may be displayed on the map can be set.
To show the name, touch “On” on the
“Area to Avoid” screen. To not show it,
touch “Off”.
ISF/IS NAVI (U)
Finish
4

NAVIGATION SYSTEM: MEMORY POINTS
126
D
To change “Location”
1. Touch “Edit” of “Location”.
2. Touch the 8 directional button to
move the cursorto the desired point
on the map.
3. Touch “OK”.
The previous screen will be displayed.
DTo change “Size”
1. Touch “Edit” of “Size”.
2. Touch eitherorto
change the size of the area to be
avoided.
3. Touch “OK”.
The previous screen will be displayed.
ISF/IS NAVI (U)
Finish

NAVIGATION SYSTEM: MEMORY POINTS
127
(c) Deleting areas to avoid
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Areas to Avoid” on the “Nav-
igation Settings” screen.
4. Touch “Delete”.
5. Touch the button to be deleted.
“Select All”:To select all registered areas
to avoid in the system.
“Unselect All”: To unselect all registered
areas to avoid in the system.
6. Touch “Delete”.
7. To delete the area, touch “Yes”. To
cancel the deletion, touch “No”. The previous destination can be deleted.
1. Push the “SETUP” button.
2. Touch “Navi.” on the “Setup”
screen.
3. Touch “Delete Previous Dest.”.
4. Touch the button you want to delete.
“Select All”:
To select all previous des-
tinations in the system.
“Unselect All”: To unselect all previous
destinations in the system.
5. Touch “Delete”.
ISF/IS NAVI (U)
Finish
— Deleting previous
destinations
4

NAVIGATION SYSTEM: MEMORY POINTS
128
6. To delete the destination, touch
“Yes”. To cancel the deletion, touch
“No”.
ISF/IS NAVI (U)
Finish

SECTION5
TELEPHONE AND INFORMATION
129
TELEPHONE AND INFORMATION
DTelephone (Hands− free system for cellular phone) 130
......
Enter a Bluetooth rphone 134
.............................
Call on the Bluetooth rphone 139
..........................
Receive on the Bluetooth rphone 146
......................
Talk on the Bluetooth rphone 146
..........................
D Calendar 149
.............................................
ISF/IS NAVI (U)
Finish
5