Update Lexus IS250 2014 Navigation Manual

181
5. SETUP
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “Traffic info settings” screen.
(→P.175)
2Select “Live update (Internet) (Roam-
ing with Bluetooth*)”.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
3Select the desired item.ENABLING TPEG TRAFFIC
INFORMATION ROAMING
The roaming function of TPEG traffic in-
formation received via a Bluetooth
® de-
vice can be enabled for roaming
situations (when outside the geographi-
cal coverage area of your mobile net-
work provider). This information can be
set to update automatically or manually.
No.Function
Select to update automatically more
frequently.
Select to update automatically less
frequently.
Select to update manually.
(→P.180)
Select to cancel TPEG traffic infor-
mation reception via a Bluetooth®
device.
IS_Navi_EE_53C71E.book 181 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

182
5. SETUP
IS300h/250_Navi_EE
1Display the “Traffic info settings” screen.
(→P.175)
2Select “Traffic Source selection”.
3Select the desired item.
1Display the “Parking info settings”
screen. (→P.175)
2Select “Live update (Internet) (Wi-Fi*1
& Bluetooth*2)”.
3Select the desired item.
*
1: Wi-Fi is a registered mark of the Wi-Fi
Alliance®.
*
2: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
SELECTING TRAFFIC
INFORMATION SOURCE
Traffic information source can be set to
receive automatically, or to receive
RDS-TMC traffic information only.
No.Function
Select to automatically select a traf-
fic information source. When both
RDS-TMC and TPEG are available,
TPEG traffic information will be se-
lected automatically.
Select to receive only RDS-TMC
traffic information.
SETTING PARKING LOT
INFORMATION UPDATE
FREQUENCY
Parking lot information can be received
via Wi-Fi
® or a Bluetooth® device. This
information can be set to update auto-
matically or manually.
No.Function
Select to update automatically.
Select to update manually.
(→P.180)
Select to cancel parking lot informa-
tion reception via Wi-Fi® or a
Bluetooth® device.
IS_Navi_EE_53C71E.book 182 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

183
5. SETUP
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Display the “Parking info settings”
screen. (→P.175)
2Select “Live update (Internet) (Roam-
ing with Bluetooth*)”.
*: Bluetooth is a registered trademark of
Bluetooth SIG, Inc.
3Select the desired item.ENABLING PARKING LOT
INFORMATION ROAMING
The roaming function of parking lot in-
formation received via a Bluetooth
® de-
vice can be enabled for roaming
situations (when outside the geographi-
cal coverage area of your mobile net-
work provider). This information can be
set to update automatically or manually.
No.Function
Select to update automatically.
Select to update manually.
(→P.180)
Select to cancel parking lot informa-
tion reception via a Bluetooth® de-
vice.
IS_Navi_EE_53C71E.book 183 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

187
6. TIPS FOR THE NAVIGATION SYSTEM
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
2. MAP DATABASE VERSION AND COVERED AREA
1Press the “MENU” button on the
Remote Touch.
2Select “Setup”.
3Select “Navigation”.
4Select “Map data”.
5Check that the map data screen is dis-
played.
MAP DATA
Coverage areas and legal information
can be displayed.
No.Function
Map version
Select to display legal information.
Select to display map data coverage
areas.
INFORMATION
●
Map data updates are available for a fee.
Contact your Lexus dealer for further
information.
IS_Navi_EE_53C71E.book 187 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

270
6. TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
IS300h/250_Navi_EE
ERROR MESSAGES
ModeMessageExplanation
CD/DVD
“No disc found.”It indicates that there is no disc in the DVD player.
“Check disc”
It indicates that the disc is dirty, damaged, or it was
inserted upside down. Clean the disc or insert it
correctly.
It indicates a disc which is not playable is inserted.
“DISC error”There is a trouble inside the system.
Eject the disc.
“Region code error”It indicates that the DVD region code is not set
properly.
USB
“USB error”This indicates a problem in the USB memory or its
connection.
“No music files found.”This indicates that no MP3/WMA/AAC files are
included in the USB memory.
“No video files found.”This indicates that no video files are included in the
USB memory.
“No image files found.”This indicates that no image files are included in the
USB memory.
iPod
“iPod error.”This indicates a problem in the iPod or its connec-
tion.
“No music files found.”This indicates that there is no music data in the iPod.
“No video files found.”This indicates that no video files are included in the
iPod.
“Check the iPod firm-
ware version.”This indicates that the software version is not com-
patible. Perform the iPod firmware updates and try
again.
“iPod authorisation un-
successful.”This indicates that it failed to authorize the iPod.
Please check your iPod.
Bluetooth®
Audio“Music tracks not sup-
ported. Check your
portable player.”This indicates a problem in the Bluetooth® device.
IS_Navi_EE_53C71E.book 270 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

280
1. SPEECH COMMAND SYSTEM OPERATION
IS300h/250_Navi_EE
1Press the talk switch.
z“Call ” is displayed in the
“Shortcuts” screen.
zWhen “Call ” on the “Shortcuts”
screen is dimmed, the contact’s speech
command recognition cannot be used.
Check the Bluetooth
® connection and if
the contacts have been transferred to the
system.
2Say or select a registered contact name.
zIn the same manner as it is displayed on the
screen, “Call ”, after saying
“Call”
say the name of a contact.
For example: “Call”, “J o h n S m i t h”
zShort or abbreviated names in the contact
list may not be recognized. Change names
in the contact list to full names.
zSometimes a voice recognition result con-
firmation screen will be displayed. After
confirming the result, say “Dial”.
zWhen the system recognizes multiple
names from the contact list, a name candi-
date list will be displayed on the screen. If
the desired name is not displayed on the
top of the screen, say the number of the
name from the candidate list to select a
name from the candidate list.
INFORMATION
●
A USB memory or iPod must be con-
nected to enable track searching and
playback. (→P.222, 229)
●When a USB memory or iPod is con-
nected, recognition data is created so
tracks can be searched using speech
commands.
●Recognition data is updated under the
following conditions:
• When the USB memory or iPod data
has changed.
• When the voice recognition language is
changed. (→P. 7 5 )
●While the recognition data is being cre-
ated or being updated, a track search
cannot be performed using a speech
command.
●When “Play music” is dimmed in the
“Shortcuts” screen, it is not possible to
search for a track using a speech com-
mand. In this situation, reduce the amount
of music data in the USB memory or iPod
and update the recognition data to
enable searching by speech command.
SPEECH COMMAND
EXAMPLE: CALL NAME
IS_Navi_EE_53C71E.book 280 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

356
2. SETUP
IS300h/250_Navi_EE
■UPDATING THE CONTACTS IN A
DIFFERENT WAY (FROM THE “Call
history” SCREEN)
1Display the telephone top screen.
(→P.329)
2Select “Call history” and select a con-
tact not yet registered in the contact list.
3Select “Update contact”.
4Select the desired contact.
5Select a telephone type for the tele-
phone number.
1Select “New contact”.
2Enter the name and select “OK”.
3Enter the telephone number and select
“OK”.
4Select the telephone type for the tele-
phone number.
5To add another number to this contact,
select “Yes”.
For PBAP compatible Bluetooth®
phones, this function is available when
“Automatic contact/history transfer” is
set to off. (→P.350)
REGISTERING A NEW
CONTACT TO THE CONTACT
LIST
New contact data can be registered.
Up to 4 numbers per person can be reg-
istered. For PBAP compatible
Bluetooth
® phones, this function is
available when “Automatic contact/his-
tory transfer” is set to off. (→P.350)
IS_Navi_EE_53C71E.book 356 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

383
1. CONNECTED SERVICES
CONNECTED SERVICES
IS300h/250_Navi_EE
8
3Select “External points”.
4Check that a confirmation screen is dis-
played when the operation is complete.
1Press the button to release the lock and
lift the armrest.
2Open the cover and connect a USB
memory.
zTurn on the power of the USB memory if it
is not turned on.
zTo edit memory points and routes:
→P.1 5 6 , 1 6 0
INFORMATION
●
Setting “Automatic memory point down-
load” to “Yes” will automatically download
external points. (→P. 3 8 9 )
• If a screen related to a memory point is
changed to before automatic memory
point download begins, automatic
memory point download will be can-
celled.
●If memory points which have the same
name are already stored in the system,
the system may not update those mem-
ory points.
PROCEDURE FOR
DOWNLOADING MEMORY
POINTS AND ROUTES FROM
A USB MEMORY
IS_Navi_EE_53C71E.book 383 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

384
1. CONNECTED SERVICES
IS300h/250_Navi_EE
3Close the console box.
4Display the “My memory” screen.
(→P.382)
5Select “Copy from USB”.
zIf a password has already been set, enter
the password. For instructions on setting a
password: →P.1 6 8
zIf there are multiple memory points stored
on the USB memory, select the memory
points and routes to be copied and select
“Start”.
6Check that a progress bar is being dis-
played while the data copy is in
progress.
zTo cancel this function, select “Cancel”.
7Check that a confirmation screen is dis-
played when the operation is complete.
INFORMATION
●
Memory points that are located outside
of the map’s data range cannot be regis-
tered.
●A maximum of 500 memory points can
be registered.
●When there are 21 or more memory
points and routes stored on a USB mem-
ory, only 20 memory points and routes
will be displayed at a time.
●Memory points acquired from Lexus por-
tal site can only be registered with the
registered system at the time of acquire-
ment.
●In some cases, memory points and routes
may not be able to be imported. If this
occurs, “Unable to read memory point
data. (Device ID error)” will be displayed.
●If memory points and routes which have
the same name are already stored in the
system, the system may not update those
memory points and routes.
IS_Navi_EE_53C71E.book 384 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

388
1. CONNECTED SERVICES
IS300h/250_Navi_EE
6Check that the thumbnails screen is dis-
played.■VIEWING A FULL SCREEN PIC-
TURE
1Select “Info” on the title bar.
2Check that a full screen view of the pic-
ture is displayed.
No.Function
Select to display the selected pic-
ture’s title bar.
Select to display the selected picture
in full screen.
Select to magnify or reduce the map
scale.
Select to display the previous 6 pic-
tures.
Select to update the thumbnails
screen. Up to 6 pictures are dis-
played.
Select to download up to another 6
pictures when there are more than 6
pictures available.
No.Function
Select to view user comments.
Select to set as a destination.
(→P.131) If a destination has already
been set, “A d d t o ” and “Replace
” will be displayed.
“Add to ”: Select to add a destina-
tion.
“Replace ”: Select to delete the
existing destination(s) and set a new
one.
INFORMATION
●
This function is not available while driving.
IS_Navi_EE_53C71E.book 388 ページ ２０１４年５月２９日　木曜日　午前１１時２２分