fuel filter LEXUS IS250C 2013 Owners Manual

556
6-1. Specifications
Lubrication system
*: The engine oil capacity is a reference quantity to be used when exchanging.Warm up and turn off the engine, wait more than 5 minutes, and check the oil
level on the dipstick.
■ Engine oil selection
IS250C
“Toyota Genuine Motor Oil” is used in your Lexus vehicle. Use Lexus
approved “Toyota Genuine Motor Oil” or equivalent to satisfy the follow-
ing grade and viscosity.
Oil grade: ILSAC GF-5 multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice for
good fuel economy and good
starting in cold weather.
If SAE 0W-20 is not available,
SAE 5W-20 oil may be used.
However, it must be replaced with
SAE 0W-20 at the next oil
change.
Oil capacity
(Drain and refill
reference*)
without filter
with filter
6.2 qt. (5.9 L, 5.2 Imp. qt.)
6.7 qt. (6.3 L, 5.5 Imp. qt.)
Outside temperature

624
GAS STATION INFORMATION
Auxiliary catch leverP. 4 1 3Trunk openerP. 5 1Fuel filler door P. 9 5
Hood lock release lever P. 4 1 3Fuel filler door openerP. 9 5Tire inflation pressureP. 5 6 3
Fuel tank capacity
(Reference)17.2 gal. (65 L, 14.3 Imp. gal.)
Fuel typeUnleaded gasoline only P. 96, 555
Cold tire inflation
pressureP. 563
Engine oil capacity
(Drain and refill 
reference)qt. (L, Imp. qt.)
Without filter 6.2 (5.9, 5.2)
With filter 6.7 (6.3, 5.5)
Engine oil typeP. 5 5 6