display lexus LC500 2018 Navigation Manual
[x] Cancel search | Manufacturer: LEXUS, Model Year: 2018, Model line: LC500, Model: Lexus LC500 2018Pages: 252, PDF Size: 46.04 MB
Page 18 of 252
18
- $ @ - $ I @ / B W J @ 0 . & @ & &
1-1. Basic function
The reception level of the con-
nected phone display ( P.18)
Remaining battery charge display
( P.19)
Bluetooth® phone connection
condition display ( P.19)
Wi-Fi® connection condition dis-
play ( P.18)
Shown during data communication
performed via Miracast™ ( P.18)
●The number of status icons that can be displayed differs depending on the dis-
played screen.
The level of reception does not always
correspond with the level displayed on
the cellular phone. The level of recep-
tion may not be displayed depending
on the phone you have.
When the cellular phone is out of the
service area or in a place inaccessible
by radio waves, is displayed.
“Rm” is displayed when receiving in a
roaming area. While roaming, display
“Rm” top-left on the icon.
The receiving area may not be dis-
played depending on the type of phone
you have.
While connected with cellular
phone
When using Wi-Fi®
When using Miracast™
Status icon
Status icons are displayed at the top
of the screen.
Status icon explanation
Reception level display
A
B
C
D
E
LevelIndicators
No connection
Poor
Excellent
LevelIndicators
No connection
Poor
Excellent
LevelIndicators
No connection
Page 19 of 252
19
1
- $ @ - $ I @ / B W J @ 0 . & @ & &
1-1. Basic function
Quick guide
●When Wi-Fi®/Miracast™ function is off, no item is displayed.
The amount displayed does not always
correspond with the amount displayed
on the Bluetooth® device.
The amount of battery charge left may
not be displayed depending on the
type of the Bluetooth® device con-
nected.
This system does not have a charging
function.
An antenna for the Bluetooth® con-
nection is built into the instrument
panel.
The condition of the Bluetooth® con-
nection may deteriorate and the sys-
tem may not function when a
Bluetooth® phone is used in the fol-
lowing conditions and/or places:
The cellular phone is obstructed by
certain objects (such as when it is
behind the seat or in the glove box or
console box).
The cellular phone is touching or is
covered with metal materials.
Leave the Bluetooth® phone in a place
where the condition of the Bluetooth®
connection is good.
Poor
Excellent
Remaining battery charge dis-
play
Remaining chargeIndicators
Empty
Low
Full
Bluetooth® connection condition
display
LevelIndicators
Indica-
torsConditions
(Blue)
Indicates that the condition of
the Bluetooth® connection is
good.
(Gray)
While in this condition, sound
quality during phone calls may
deteriorate.
Indicates that the cellular phone
is not connected via Bluetooth®.
Page 21 of 252
21
1
- $ @ - $ I @ / B W J @ 0 . & @ & &
1-1. Basic function
Quick guide
The information screen can be
reached by the following methods:
1 Press the “MENU” button on the
Remote Touch.
2 Select “Info”.
Select to display the energy moni-
tor or fuel consumption screen.*
*: Refer to the “OWNER’S MANUAL”
Information screen
Information screen
A
Page 22 of 252
22
- $ @ - $ I @ / B W J @ 0 . & @ & &
1-2. Navigation operation
1-2.Navigation operation
1Press the “MAP” button on the
Remote Touch.
2 A short while later, the display auto-
matically switches to map screen.
■Displaying the map screen
The following operations can also be
performed.
Changing the map direction
( P.71)
Displaying 3D map (P.71)
1 Select the desired point on the map
screen.
Move the desired point on the cen-
ter of the map screen.
After the screen is scrolled, it is pos-
sible to do the drag or flick opera-
tion on the touchpad.
Press the “MAP” button on the
Remote Touch to return to the cur-
rent position.
For detailed operation about mov-
ing the map screen: P.69
■Zooming in the map
1 Select on the map.
2 Select “+” or pinch out on the
touchpad of the Remote Touch.
( P.70)
Operating the map screen
Displaying the current position
of the vehicle on the map screen
Moving the map screen
Zooming in /out the map
Page 23 of 252
23
1
- $ @ - $ I @ / B W J @ 0 . & @ & &
1-2. Navigation operation
Quick guide
■Zooming out the map
1 Select on the map.
2 Select “-” or pinch in on the
touchpad of the Remote Touch.
( P.70) 1 Press the “MAP” button on the
Remote Touch.
2 There are different kinds of meth-
ods to search for a destination.
( P.79)
3 Select “Go”.
Check that the entire route map is
displayed. ( P.90)
4 Select “Destination”.
Guidance to the destination is dis-
played on the screen and can be heard
via voice guidance.
Guiding the route
Setting the destination
Page 24 of 252
24
- $ @ - $ I @ / B W J @ 0 . & @ & &
1-2. Navigation operation
When route guidance is no longer
necessary, such as when you know the
rest of the route to your destination, the
destination can be deleted.
1 A short while later after the “MAP”
button is pressed, the display auto-
matically switches to map screen.
( P.65)
2 Select the on the map.
3 Select “Route”
4 Select “Delete”.
When more than 1 destination has
been set, the “Stopover list” will be
displayed on the screen. Select the
item(s) to be deleted. ( P.95)
5 Select “Yes” when the confirmation
screen appears.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Select “Home”.
4 Select “Yes”.
5 There are different kinds of meth-
ods to search for your home.
( P.79)
6 Select “Enter”.
Registration of home is complete.
• Editing the name, address and route
P.103
• Setting home as the destination P.25
Deleting destinationsRegistering home
Registering home
Page 27 of 252
2
27
- $ @ - $ I @ / B W J @ 0 . & @ & &
2
Basic function
Basic function
2-1. Basic information before opera-
tion
Initial screen ................................... 28
How to use the Remote Touch 28
Operating the screen................... 31
Using side display ........................ 33
Entering letters and numbers/list
screen operation ....................... 35
Linking multi-information display
and navigation system ............. 38
2-2. Network settings
Registering/Connecting
Bluetooth® device ................... 39
Setting Bluetooth® details ........ 43
Connecting to internet via Wi-Fi®
............................................................. 51
2-3. Other settings
General settings ........................... 56
Voice settings ................................ 60
Vehicle settings............................... 61
For vehicles sold outside Europe, some of the functions cannot be operated
while driving.
Page 28 of 252
28
- $ @ - $ I @ / B W J @ 0 . & @ & &
2-1. Basic information before operation
2-1.Basic information before operation
After a few seconds, the “CAUTION”
screen will be displayed.
Waiting about 5 seconds or selecting
“Continue” switches to the last dis-
played screen.
When system response is extremely
slow, the system can be restarted.
1 Press and hold the “PWR•VOL”
knob for 3 seconds or more.
1 Use the touchpad of the Remote
Touch to select the desired button
on the screen.
2 The buttons on the screen can be
selected by either depressing or
double tapping on the touchpad.
Once a button has been selected,
the screen will change.
When the pointer moves close to a
button, it will automatically snap to
Initial screen
When the engine switch
or IGNITION ON mode
played and the system will begin
operating.
Caution screen
WARNING
●When the vehicle is stopped with the engine running
Restarting the system
How to use the Remote
Touch
This system can be operated by the
Remote Touch when the engine
switch
SORY or IGNITION ON mode
Touchpad operation
Page 29 of 252
29
2
- $ @ - $ I @ / B W J @ 0 . & @ & &
2-1. Basic information before operation
Basic function
that button and the Remote Touch
feedback force (vibration) is gener-
ated by the touchpad.
This feedback force can be
adjusted. ( P.56)
Press the “MENU” button on the
Remote Touch to display the menu
screen. ( P.16)
The map screen can be displayed by
pressing the “MAP” button on the
Remote Touch. ( P.69)
When is displayed on the
screen, select or press the
button on the Remote Touch
to return to the previous screen.
●Perform touchpad operations using a fin- ger. Do not use nails or other objects like
pens, etc.
●Perform pointer movement operations
using only one finger. The pointer can not be operated by using more than one fin-ger.
●When water or othe r foreign materials are on the touchpad, a malfunction may
occur. In those cases, wipe off the water or foreign materials and wait about 30 seconds before operating the touchpad.
●In the following cases, there is a possibility that the touchpad may not react nor-
mally: • When wearing gloves, etc.• When operated with a wet hand.
• When a film, paint-like substance, etc., is on the touchpad.• Near a TV tower, electrical power plant,
gas station, large display, airport or other facility that generate s strong radio waves or electrical noise.
• When wireless devices, such as portable radios and mobile phones are nearby.• When the following metal items are
placed on the touchpad: Coins
Keys Metal parts of a wallet or purseA card in which aluminum foil, etc., is
attached A box of cigarettes that uses aluminum foil
Disposable hand warmers Media such as CD/DVDs, USB cables, etc.
• When the temperature is -20°C (-4°F) or less
●If a hand or object was placed on the touchpad when the engine switch
TION ON mode
touchpad and operate it after waiting about 30 seconds. If there still no reac-tion, turn off the engine switch
●Clean the touchpad frequently, as the reaction of the touch operation may
worsen if the touchpad is dirty. In order to prevent malfunctions when cleaning the touchpad, turn the engine switch
Operations are performed by touching
the touchpad with your finger.
NOTICE
●Do not allow the Remote Touch to
come into contact with food, liquid, stickers or lit cigarettes as doing so may cause damage.
●Do not subject the Remote Touch to
excessive pressure or strong impact as doing so may cause damage.
●Do not push the touchpad with a strong force or use a sharp pointed
object to operate the pad, as it is possi- ble to cause damage.
Touchpad gestures
Page 31 of 252
31
2
- $ @ - $ I @ / B W J @ 0 . & @ & &
2-1. Basic information before operation
Basic function
Sub menu
Selecting the sub menu item switches the information displayed on the main display.
The displayed items differ according to the function.
Main display
For details about the functions and operation of the main display, refer to the respective
Operating the screen
The screen can be operated in full screen or split-screen mode.
Split-screen mode can display di fferent information side-by-side.
When the split-screen is displayed, it is necessary to select the screen you
wish to operate.
Names and operations of each part
A
B