jump cable lexus LFA 2012 Owner's Manual / LEXUS 2012 LFA: INSIDE THE LFA

98
■
■Starting the engine by connecting an external
battery
1 Open the rear hatch and remove the
battery cover.
Manually unlock the rear hatch (" P. 95)
2 After removing the positive (+) battery terminal cover and checking that the
negative (-) terminal is securely fixed in place, connect the jumper cables in the
following order:
1. Connect the positive (+) jumper
cable to the LFA battery’s positive
(+) terminal.
2. C o n n e c t t h e o t h e r e n d o f t h e
positive (+) jumper cable to the
e x t e r n a l b a t t e r y ’s p o s i t i ve ( + )
terminal.
3. Connect the negative (-) jumper
c a b l e t o t h e ext e r n a l b a t t e r y ’s
negative (-) terminal.
4. C o n n e c t t h e o t h e r e n d o f t h e
negative (-) jumper cable to the
LFA battery’s negative (-) terminal.
To prevent thermal damage to the LFA’s CFRP (Carbon Fiber Reinforced Plastics) body,
ensure that the jumper cables are securely attached to the battery terminals and are not in
contact with any CFRP parts.

99
If the vehicle battery is discharged
3 Allow the battery to charge for a while, and then start the engine.
4 When the engine has started, remove the jumper cables in the exact reverse order
of how they were connected.

Negative battery terminal structure
The LFA's batter y terminals can be
disconnected by raising the lever and
disconnecting the terminal.
When reconnecting the terminal, make
sure that the lever is lowered into the
lock position.
Lock position