ECO mode lexus LFA 2012 Technical Information / LEXUS 2012 LFA: INSIDE THE LFA

16
Engine protection mechanisms
The LFA’s 1LR-GUE engine generates a maximum output of 412 kW (553 HP) at
8,700 rpm and delivers 90% or more of its peak torque of 354 ft•lbf (480 N•m,
48.9 kgf•m) between 3,700 and 9,000 rpm. The engine features a number of
protection mechanisms to ensure longevity and maintain peak performance.
A number of driving restrictions will be in place until the total mileage shown on the
odometer exceeds 310 miles (500 km). This break-in period serves not only to
protect the engine, but also to preserve the transmission, suspension and the vehicle
as a whole. It is recommended that during this time the owner become familiar with
the LFA and avoid high-load driving maneuvers.
One engine protection mechanism in place beyond the break-in period is the limiting
of maximum engine speed when the engine is cold. When the vehicle is cold started,
various components within the engine begin to warm up and expand at different rates.
Forcing the engine to operate at high speeds in this condition can cause accelerated
engine wear. For this reason, the maximum engine speed is limited when manually
shifted driving modes (SPORT, NORMAL, WET) are selected and restricted to a set
range when AUTO mode is selected.
This engine speed limitation does not indicate a malfunction with the vehicle. Warming
the engine up by driving, rather than extended idling, is recommended.

36
Shifting
With regards to the drivetrain, the steering wheel-mounted paddle shift switches
command the automated dry single-plate clutch and rear-mounted ASG (Automated
Sequential Gearbox) transaxle. This fully automated configuration allows the driver to
upshift (+) or downshift (-) while keeping both hands on the steering wheel.
When the driver initiates a gear change using the paddle shift switches, the ASG
computer automatically controls and coordinates clutch engagement, engine speed,
torque transfer and gear select and shift operations.
The engine-mounted dr y single-plate clutch and rear-mounted transaxle are
connected via torque tube to provide the direct feel of a manual gearbox.
The ECU manages gear changes to provide intuitive response to the driver ’s
a c c e l e r a t i o n d e m a n d s . D o i n g s o a l l o w s g e a r c h a n g e s t o b e c a r r i e d o u t
instantaneously, providing a nearly uninterrupted flow of power. The engine speed
is computer controlled on upshifts and downshifts in order to ensure smooth clutch
engagement.
Naturally, shifting can be accomplished manually via the paddle shift switches.
However, shifting can also be performed automatically in AUTO mode. Switching to a
different driving mode using the driving mode selector switch or operating the paddle
shift switches will resume manual operation.
When in a manually shifted driving mode, the shift speeds may be tailored to the
driver’s preferences. Using the shift speed selector, the shift speed can be adjusted in
7 stages to a minimum shift time of approximately 0.15 seconds.