tire pressure lexus LFA 2012 Technical Information / LEXUS 2012 LFA: INSIDE THE LFA

53
Braking
■
■Brake discs
Each brake disc is made from CCM (Carbon Ceramic Material) and features a two-
piece floating construction with an aluminum center hat. With this construction, disc
deformation due to expansion at high temperatures is more effectively mitigated;
thereby enabling a more consistent application of pressure from the brake pads for
stable and confidence-inspiring brake performance under any circumstances.
CCM discs provide the high stopping

power and thermal capacity needed
to provide consistent braking at high
speeds.
The discs are impregnated with silicone
material to ensure outstanding stopping
power and endurance when they are not
yet at optimal operating temperature or
in wet conditions. However, one should
avoid spraying water directly onto a hot
brake disc. Fur thermore, CCM discs
are susceptible to microscopic cracking
and local damage resulting from a direct
impact. Care is required when installing a
tire and wheel as accidental contact may
result in damage.

Bedding-in new brake pads or rotors:
In order to ensure maximum performance from a set of replacement CCM discs
or brake pads, it is necessary to bed them in. Please consult your Lexus dealer
regarding the appropriate bedding procedure. The LFA is shipped from the factory
with pre-bedded CCM discs and brake pads.
The disc diameters are 15.35 in. (390
mm) for the front and 14.17 in. (360 mm)
for the rear. Both front and rear discs are
ventilated with 0.20 in. (5 mm) diameter
d r i l l e d c o o l i n g h o l e s . T h e a d o p t i o n o f
CCM as opposed to conventional cast-iron
results in a reduction in unsprung weight of
approximately 11.03 lb. (5 kg) per wheel.

67
Using the meter
■
■Menu structure
Speed Ind The color will change and a buzzer will sound when
the vehicle reaches a set speed.
Rev Ind The color will change and a buzzer will sound when
the engine speed reaches a set speed.
Status Trip Info
Indicates the instantaneous fuel consumption, average
vehicle speed, average fuel consumption, and driving
range.
Oil Level Shows the amount of engine oil in the oil tank.
Oil
Maintenance Indicates engine oil replacement timing. (Be sure to
reset after replacing the oil.)
Tire Pressure Shows inflation pressure of each tire.
Lap Timer Measures and shows lap times.
Brightness Allows driver to adjust the brightness of the meter and
interior illumination.
Settings Needle
Allows driver to change the color of the tachometer
needle.
Rev Peak Retains an image of the tachometer needle at the
highest engine speed attained prior to an upshift or
deceleration.
Clock Allows driver to adjust the displayed time and choose
between 12-hour (12H) and 24-hour (24H) mode.
Shortcut Allows driver to jump to a preset display.
Units Changes units of the displayed speed, odometer
readings and fuel consumption between MPG,
L/100 km and km/l.
Temp Changes the display temperature between Celsius
and Fahrenheit.
Language Changes the language displayed.
When a warning is displayed on the meter, the “Menu” text at the top of the menu
screen will change to “Warning”.