seats lexus LFA 2012 Technical Information / LEXUS 2012 LFA NURBURGRING PACKAGE GUIDE
[x] Cancel search | Manufacturer: LEXUS, Model Year: 2012, Model line: LFA, Model: Lexus LFA 2012Pages: 25, PDF Size: 2.76 MB
Page 14 of 25
44
LFA_Nurburgring_U
In order to further pursue emotive performance in the Nürburgring Package, a weight
reduction of the interior equipment has been achieved.
The adoption of full bucket seats and exclusive CFRP (Carbon Fiber Reinforced Plas-
tics) parts reduced vehicle weight and helped contribute to improved drivability. Addi-
tionally, the adoption of these interior parts raises the expectation of driving.
■Full bucket seats (Europe only)
In the Nürburgring Package, full bucket seats (RECARO RS-W) have been adopted
to secure a stable driving position across a variety of driving conditions.
For the frame, lightweight and high-rigid CFRP has been adopted, improving drivabil-
ity due to a vehicle weight reduction and achieving a high level of holding performance
even during sharp turns.
Additionally, while maintaining side support performance, the shape of the seats have
been optimized, increasing the ease of getting in and out of the vehicle and improving
daily usability of the vehicle when compar ed to those used on racing vehicles.
905 mm
74 0 m m
540 mm
465 mm
Interior
LFA_Nur_J_U_K_M_OM77029U.book 44 ページ 2012年1月17日 火曜日 午前10時13分
Page 15 of 25
45
Interior
LFA_Nurburgring_U
■Holding performance
Even during sharp turns, the full bucket seats hold the driver’s body without allowing
any body movement and support accurate steering operations and pedal work.
Also, by keeping one’s posture, eyepoint is maintained, making it possible to judge dis-
tances and respond to object recognition correctly.
With the Nürburgring Package, the full bucket seat’s high holding performance
enables a precise driving position to be held, allowing the driver to enjoy driving at
their will.
■Weight reductions
The weight applied to the center of the vehicle is reduced by adopting lightweight and
high-rigid CFRP for the seat’s frame and Alcantara * for the seat’s upholstery, con-
tributing to an improvement in driving performance.
*:“Alcantara” is a registered trademark of Alcantara S.p.A.
Full bucket seats
[Adjustment]
Lift the lever beneath the seat to adjust the seat forward or backward.
[Maintenance]
The seat cushions can be removed.
Remove the seat cushions to clean away dust under the cushions.
[Label attached to the seat cushion]
The procedure for removing the seat lever is
written on the label located under the seat
cushion. Take care not to scratch the label
when cleaning.
LFA_Nur_J_U_K_M_OM77029U.book 45 ページ 2012年1月17日 火曜日 午前10時13分
Page 17 of 25
47
Interior
LFA_Nurburgring_U
■Maintaining the vehicle's interior*2
■Alcantara*1 areas
After wiping dirty surfaces with a dampened soft cloth, wipe away any remaining
moisture with a soft, dry cloth.
■CFRP/Satin finish metal accent areas
After wiping dirty surfaces with a dampen ed soft cloth or synthetic chamois, wipe
away any remaining moisture with a soft, dry cloth.
■Leather areas
Remove dirt and dust using a vacuum cleaner and wipe the surface with a dry, soft
cloth to remove any remaining moisture.
*1:“Alcantara” is a registered trademark of Alcantara S.p.A.
*2: Refer to the Owner's Manual for details and cautions regarding the maintenance of each component.
Removing and installing floor mats
Floor mats are not provided on Nürburgring Package models.
Vehicles with power seats: If installing floor mats, ensure that then only use LFA-
exclusive floor mats. Refer to the Owner's Manual for details and cautions regard-
ing installation.
Vehicles with full bucket seats: Do not install floor mats. If floor mats are installed, the
floor mat retaining hooks (clips) may interfere with the seat when the seat is
adjusted, preventing the correct seat position from being reached.
LFA_Nur_J_U_K_M_OM77029U.book 47 ページ 2012年1月17日 火曜日 午前10時13分