belt lexus LFA 2012 Technical Information / LEXUS 2012 LFA (OM77006U) Service Manual

85
1-7. Safety information
1
Before driving
CAUTION
■When installing a child restraint system
●Ensure that the belt and plate are securely locked and the seat belt is not twisted.
●Push and pull the child restraint system from side to side and forward to be sure it
is secure.
●After securing a child restraint system, never adjust the seat.
●Follow all installation instructions provid ed by the child restraint system manufac-
turer.

174
2-4. Using other driving systems
Launch control
When set, launch control enables the vehicle to accelerate from a standing
start at 4000 rpm. Launch control uses overall optimized control that consid-
ers vehicle acceleration performance, st ability and clutch durability. (Do not
use launch control on public roads.)
■ Setting the system
Ensure that you are seated well ba ck in the driver’s seat with the
seat belt fastened.
Make sure that the passenger is al so seated well back with their seat
belt fastened.
Start the engine. Firmly depress the brake pedal with your left
foot and release the parking brake.
Continue to depress the brake pedal.
Select SPORT driving mode.
Select shift speed level 7.
Pull the “+” paddle shift switch to select 1st gear.
Pull the “-” paddle shift swit ch and hold it for 5 seconds.
“LAUNCH” will be displayed on the meter.
Release the “-” paddle shift switch.
Depress the accelerator pedal firmly.
Continue to depress the accelerato r pedal. The engine speed will be
automatically maintained at 4000 rpm. The vehicle is then ready for
launch.
Release the brake pedal.
The vehicle will launch forward.
Once the accelerator pedal is released completely, launch control will be
canceled and SPORT driving mode will be engaged.
STEP1
STEP2
STEP3
STEP4
STEP5
STEP6
STEP7
STEP8
STEP9

178
2-5. Driving information
CAUTION
■Things that must not be carried in the luggage compartment
The following things may cause a fire if loaded in the luggage compartment:
●Receptacles containing gasoline
●Aerosol cans
■Storage precautions
Observe the following precautions.
Failure to do so may result in death or serious injury.
●Stow cargo and luggage in the lugga ge compartment whenever possible.
●Do not place cargo or luggage in or on the following locations as the item may
get under the brake or accelerator pedal and prevent the pedals from being
depressed properly, block the driver’s vision, or hit the driver or passenger, caus-
ing an accident:
• At the feet of the driver
• On the passenger seat (when stacking items)
• On the package tray
• On the instrument panel
•On the dashboard
●Secure all items in the occupant compartment, as they may shift and injure some-
one during sudden braking, sudden swerving or an accident.
●Never allow anyone to ride in the luggage compartment. It is not designed for
passengers. The passenger should ride in th e seat with the seat belt properly fas-
tened. Otherwise, the passenger is much more likely to suffer death or serious
bodily injury, in the event of sudden br aking, sudden swerving or an accident.
■Capacity and distribution
●Do not exceed the maximum axle weight ra ting or the total vehicle weight rating.
●Even if the total load of occupant’s weight and the cargo load is less than the total
load capacity, do not apply the load unevenly. Improper loading may cause dete-
rioration of steering or braking control which may cause death or serious injury.

236
4-1. Maintenance and care
■Cleaning the artificial leather (Alcantara®) areas
● Brush the surfaces using a soft brush.
Do not brush hard as doing so may cause damage.
●Wipe the surfaces clean with a soft cloth that has been dampened in
cold or lukewarm water and squeezed out.
● Allow the artificial leather (Alcantara
®) to dry in a shaded and venti-
lated area.
■Caring for leather areas
Lexus recommends cleaning the interior of the vehicle at least twice a year to main-
tain the quality of the vehicle’s interior.
■Shampooing the carpets
There are several commercial foaming-type cleaners available. Use a sponge or
brush to apply the foam. Rub in overlappin g circles. Do not use water. Wipe dirty
surfaces and let them dry. Excellent results are obtained by keeping the carpet as
dry as possible.
■Seat belts
Clean with mild soap and lukewarm water using a cloth or sponge. Also check the
belts periodically for excessive wear, fraying or cuts.
■Cleaning the partition glass
As the partition glass is made of polycarbonate, follow the procedure below.
Remove dust with a soft, dampened cloth.
Clean the surface using a mild soap or neutral detergent.
Remove residual soap or detergent with a dampened cloth.
Wipe away any remaining moisture with a soft, dry cloth.
STEP1
STEP1STEP2
STEP1STEP3
STEP1STEP4

243
4-2. Maintenance
4
Maintenance and care
Vehicle interior
ItemsCheck points
Accelerator pedal • The accelerator pedal should move
smoothly (without uneven pedal
effort or catching).
Brake pedal • Does the brake pedal move
smoothly?
• Does the brake pedal have appro- priate clearance from the floor?
( P. 3 6 4 )
• Does the brake pedal have the cor- rect amount of free play?
( P. 3 6 4 )
Brakes • The vehicle should not pull to one
side when the brakes are applied.
• The brakes should work effectively.
• The brake pedal should not feel
spongy.
• The brake pedal should not get too close to the floor when the brakes
are applied.
Indicators/buzzers • Do the indicators and buzzers
function properly?
Lights • Do all the lights come on?
Pa r k i n g b r a ke • When parked on a slope and the
parking brake is on, is the vehicle
securely stopped?
Seat belts • Do the seat belts operate
smoothly?
• The seat belts should not be dam- aged.

249
4-3. Do-it-yourself maintenance
4
Maintenance and care
CAUTION
The engine compartment contains many mechanisms and fluids that may move sud-
denly, become hot, or become electrically energized. To avoid death or serious injury,
observe the following precautions:
■When working on the engine compartment
●Keep hands, clothing, and tools away from the moving fan and engine drive belt.
●Be careful not to touch the engine, exhaust manifold, etc. right after driving as
they may be hot. Oil and other fluids may also be hot.
●Do not leave anything that may burn easily, such as paper or rags, in the engine
compartment.
●Do not smoke, cause sparks or expose an open flame to fuel. Fuel fumes are flam-
mable.
■When working near the electric cooling fan
Be sure the ignition switch is in the “LOCK” position.
With the ignition on, the electric cooling fan may automatically start to run if the air
conditioning is on. ( P. 2 6 1 )
■Safety glasses
Wear safety glasses to prevent flying or falling material, fluid spray, etc. from getting
in the eyes.
NOTICE
■If you remove the air cleaner filters
Driving with the air cleaner filters remo ved may cause excessive engine wear due
to dirt in the air. Also a backfire could cause a fire in the engine compartment.

297
4-3. Do-it-yourself maintenance
4
Maintenance and care
■ Luggage compartment
FuseAmpereCircuit
1VSSR 5 A Electric power control system
2RR-IG110 AActive rear wing, electric cooling fans,
electronic parking brake, electroni-
cally controlled brake system, seat
belts, navigation system, rear window
defogger, back-up lights
3WASH
20 A Windshield washer
4F/OPN 10 A Fuel filler door opener
5TA I L 1 0 AParking lights, front side marker lights,
rear side marker lights, license plate
lights, stop/tail lights
6RR FOG 7.5 A

7AMP RH 30 A Audio system
8AMP LH 30 A Audio system
9OIL PMP 25 AASG (Automated Sequential Gear-
box)
10RR ECU-B 7.5 AActive rear wing, electronic parking
brake
11ASG-IG2 7.5 AASG (Automated Sequential Gear-
box)

304
5-1. Essential information
Taking out the towing eyelet and screwdriverOpen the rear hatch and remove
the cover.
Release the belt and take out the
tool bag.
Take the towing eyelet and screw-
driver out of the tool bag.
STEP1
STEP2

310
5-1. Essential information
Event data recorder
This vehicle is equipped with an event data recorder (EDR). The main purpose
of an EDR is to record, in certain crash or near crash-like situations, such as an
airbag deployment or hitting a road obstacle, data that will assist in under-
standing how a vehicle's systems perf ormed. The EDR is designed to record
data related to vehicle dynamics and safe ty systems for a short period of time,
typically 30 seconds or less.
The EDR in this vehicle is designed to record such data as:
● How various systems in your vehicle were operating;
● Whether or not the driver and passenger safety belts (seat belts) were
buckled/fastened;
● How far (if at all) th e driver was depressing the accelerator and/or
brake pedal; and,
● How fast the vehicle was traveling.
These data can help provide a better understanding of the circumstances
in which crashes and injuries occur.
NOTE:
EDR data are recorded by your vehicl e only if a non-trivial crash situation
occurs; no data are recorded by the EDR under normal driving condi-
tions and no personal data (e.g., na me, gender, age, and crash location)
are recorded. However, other parties, such as law enforcement, could
combine the EDR data with the type of personally identifying data rou-
tinely acquired during a crash investigation.

314
5-2. Steps to take in an emergency
Have the vehicle inspected by your Lexus dealer immediately.
Failing to investigate the cause of the following warnings may lead to the
system operating abnormally and possibly cause an accident. Have the
vehicle inspected by your Lexus dealer immediately.
Warning lightWarning light/Details
(U.S.A.)
(Canada)
Malfunction indicator lamp Indicates a malfunction in:
• The electronic engine control system;
• The electronic throttle control system; or
• The electronic transmission control system.
SRS warning light Indicates a malfunction in:
• The SRS airbag system; or
• The seat belt pretensioner system.
(U.S.A.)
(Canada)
ABS warning light Indicates a malfunction in:
•The ABS; or
• The brake assist system.
Brake system warning light Indicates a malfunction in:
• The electronically controlled brake system; or
• The electric parking brake.
Electric power steering system warning light (warning
buzzer) Indicates a malfunction in the EPS system.
(Comes on) Slip indicator
Indicates a malfunction in:
• The VSC system;
•The TRAC system; or
• The hill-start assist control system.