wheel bolt torque lexus LFA 2012 Technical Information / LEXUS 2012 LFA OWNERS MANUAL (OM77006U)

281
4-3. Do-it-yourself maintenance
4
Maintenance and care
Wheels
If a wheel is bent, cracked or heavily corroded, it should be replaced.
Otherwise, the tire may separate from the wheel or cause loss of handling
control.
The wheel bolts used are exclusive to the LFA. When replacing the wheels or
wheel bolts, consult your Lexus dealer.
■ Aluminum wheel precautions
●Use only Lexus wheel bolts design ed for use with your aluminum
wheels.
● When repairing or changing your tires, check that the wheel bolts
are still tight after driving 1000 miles (1600 km).
● Use only Lexus genuine balance we ights or equivalent when bal-
ancing your wheels.
■When replacing wheels
The wheels of your Lexus are equipped with tire pressure warning valves and trans-
mitters that allow the tire pressure warning system to provide advanced warning in
the event of a loss in tire inflation pres sure. Whenever wheels are replaced, the tire
pressure warning valves and tran smitters must be installed. (P. 2 7 1 )
■Wheel bolt torque
An exclusive hub socket for the wheel bolts of
the LFA is contained in the tool bag. A 1 /2-
inch (12.7 mm) drive extension bar and a
torque wrench are required to tighten the
bolts.
Tightening torque:
81 ft
•lbf (110 N•m, 11.2 kgf•m)

366
6-1. Specifications
Tires and wheels
Ti r e s i z e265/35ZR20 (95Y), 305/30ZR20 (99Y)
Front and rear tire inflation pres-
sure
(Recommended cold tire inflation
pressure) Front:
33 psi (230 kPa, 2.3 kgf/cm
2 or bar)
Rear: 33 psi (230 kPa, 2.3 kgf/cm
2 or bar)
Driving at high speeds (above 155 mph [250
km/h]) (in countries where such speeds are
permitted by law) Add 8 psi (50 kPa, 0.5 kgf/cm
2 or bar) to the
front tires and rear tires. Never exceed the
maximum cold tire inflation pressure indicated
on the tire sidewall.
Wheel size Front: 20 
9 1 /2J
Rear: 20  11 1 /2J
Wheel bolt torque 81 ft•lbf (110 N•m, 11.2 kgf•m)