trunk lexus LS400 1994 Engine / 1994 LS400: AIR CONDITIONING AND AUDIO

AIR CONDITIONING AND AUDIO
106The compact disc player of this system is provided with an
automatic changer which can play selected discs or 6 discs
continuously. The player is mounted in the trunk, on the right
and is operated from the driver’s seat.
(a) Inserting compact discs
1. When you push the OPEN button of the player, the cover
opens and the magazine containing discs is ejected. Remove
the magazine.
2. Push the lever on the side of the magazine to open the tray.
3. Put a disc on the tray with its label face down and swing the
tray back into the magazine.
If the label faces up, the disc cannot be played. In this case,
“Err” and the disc number appear on the display.

AIR CONDITIONING AND AUDIO
108(d) Selecting a program
Automatic program selection: Use for direct access to a
desired program.
Push either of the
(TRACK) buttons and hold it until
the desired program track number appears on the display. As
you release the button, the player will start playing the selected
program from the beginning.
Manual program selection:
Push the
(FF) button and hold it to fast forward the disc.
Releasing the button starts the play from that position.
Disc scan selection: Use for disc-to-disc scanning.
Push the
(SCAN) button. With “SCAN” on the display, the
program at the beginning of each disc will be played for 10
seconds. To continue listening to the program of your choice,
push the
(CD) button.
(e) Other compact disc player functions
“RPT” button: Use for automatic repeat of the program
currently being listened to.
Push the
(RPT) button while the program is being played.
As this is done, “RPT” will appear on the display. When the
program is finished, the disc will automatically go back to the
beginning of the program and the program will be played again.
To cancel it, push the button once again.“RAMDOM” button: Use for automatic program selection and
play by the system.
When the
(RANDOM) button is depressed. “RND”
appears on the display and the system selects a program in the
disc which is set and plays it. To cancel it, push the button once
again.
When a program is skipped or the system is inoperative, push
the
(CD) button to reset.
“CD CMP” button: Use for listening to music in noisy
situations.
Push the
(CD CMP) button and hold it until a beep is
heard. “CMP” appears on the display. Small sounds are
emphasized and large sounds muted slightly so that every
sound can be heard clearly.
This function works only in the “CD” mode. To cancel it, push
the button once again and hold it until a beep is heard.
(f) If the player malfunctions
If “WAIT” appears on the display, audio signals of the disc
cannot be read or the system has trouble. Push the
(CD)
button once again.
If the player does not operate, check that the disc surface is not
soiled or damaged. If the disc is O.K., the following two causes
are possible.

Condensation may have occurred on the internal
mechanism of the player.
Open the trunk to let air circulate.