buttons lexus LS400 1995 Engine / 1995 LS400: AIR CONDITIONING AND AUDIO

AIR CONDITIONING AND AUDIO
95
(a) Climate control
SETTING OPERATION − automatic control
1. Push the “AUTO” button.
Air flow quantity, switching of the diffusers, on−off of the air
conditioning, and switching of the air intake between
RECIRCULATED AIR and OUTSIDE AIR are automatically
adjusted. The operation status is shown by each indicator.
When one of the manual control buttons is depressed while
operating in automatic mode, the operation corresponding to
the button depressed is set. Other conditions continue to be
adjusted automatically.
Push the “OFF” button to turn the air conditioning off.
2. Use the “TEMP” or “PASSENGER TEMP” button to set
the desired temperature.
The “TEMP” or “PASSENGER TEMP” button is used to set the
desired temperature. The temperature will be controlled on the
driver and passenger sides simultaneously or individually.
“TEMP” button − Changes the temperature on the driver and
passenger sides simultaneously or the driver side only.
“PASSENGER TEMP” button − Changes the temperature on
the passenger side only.
“DUAL” button − Changes the mode of the temperature
setting.
The indicator on the “DUAL” button has two modes:
With the indicator on − For individual temperature setting
With the indicator off − For simultaneous temperature
setting

AIR CONDITIONING AND AUDIO
98If manual on−off of the air conditioning is desired −
Push the “A / C” button to turn the air conditioning on and push
it again to turn the air conditioning off.
If the system is used for ventilation, heating in dry weather or
removing frost or exterior fog on the windshield, turn the air
conditioning off once it is no longer required. This will improve
fuel economy. The air conditioning can be used for year−round
automatic temperature control including cooling and
dehumidifying operation.
If the air conditioning compressor does not operate, the
indicator of the “A / C” button will blink. If the indicator of the
“A / C” button blinks even when the “A / C” button is pushed
again, have the compressor checked by your nearest Lexus
dealer.
(b) Windshield defogging and defrosting
To remove interior fog on the windshield −
Push the “FRONT WINDSHIELD” button of the air flow control
buttons.
To remove frost or exterior fog on the windshield −
1. Place the temperature control button at the maximum
temperature.
2. Push the “FRONT WINDSHIELD” button of the air flow
control button.
3. Push the fan speed control button on the right side to obtain
a maximum air flow.
4. Leave the air conditioning on−off button off.

AIR CONDITIONING AND AUDIO
103
1
Turning the system on and adjusting volume
(See page 106 for details.)
2
Stopping and ejecting a cassette tape
(See page 111 for details.)
3
Function buttons
1 − 6: Station selector buttons
(See page 110 for details.)
SCAN: Scan tuning
(See page 111 for details.)
P. SCAN: Preset scan tuning
(See page 111 for details.)
4
Display of functions in TAPE mode

:
Side change
(See page 112 for details.)
:DOLBY NR
(See page 112 for details.)
:Rewinding
(See page 112 for details.)


:Fast forwarding
(See page 112 for details.)
RPT:Automatic repeat
(See page 113 for details.)
SKIP: Automatic skip of blank portions of tape
(See page 113 for details.)
SCAN: Scan selection
(See page 114 for details.)
4
Display of functions in CD mode
:Disc selection
(See page 119 for details.)
:Reversing
(See page 120 for details.)


:Fast forwarding
(See page 120 for details.)
RPT:Automatic repeat
(See page 121 for details.)
RAND: Random access
(See page 121 for details.)
SCAN: Scan selection
(See page 119 for details.)
5
Mode selectors
(See page 106 for details.)
6
Cassette tape slot
(See page 111 for details.)
7
Tone and balance knobs
(See page 107 for details.)
8
Radio mode:Frequency tuning
(See page 109 or 110 for details.)
TAPE mode:Direct access to a desired program
(See page 114 for details.)
CD mode:Direct access to a desired program
(See page 120 for details.)

AIR CONDITIONING AND AUDIO
105
1
Turning the system on and adjusting volume
(See page 106 for details.)
2
Stopping and ejecting a cassette tape
(See page 111 for details.)
3
Function buttons
1 − 6: Station selector buttons
(See page 110 for details.)
SCAN: Scan tuning
(See page 111 for details.)
P. SCAN: Preset scan tuning
(See page 111 for details.)
4
Display of functions in TAPE mode

:
Side change
(See page 113 for details.)
:DOLBY NR
(See page 112 for details.)
|: Direct access to a desired program
(See page 115 for details.)


|: Direct access to a desired program
(See page 115 for details.)
RPT:Automatic repeat
(See page 113 for details.)
SKIP: Automatic skip of blank portions of tape
(See page 113 for details.)
SCAN: Scan selection
(See page 114 for details.)
4
Display of functions in CD mode
:Disc selection
(See page 119 for details.)
:Reversing
(See page 120 for details.)


:Fast forwarding
(See page 120 for details.)
RPT:Automatic repeat
(See page 121 for details.)
RAND: Random access
(See page 121 for details.)
SCAN: Scan selection
(See page 119 for details.)
5
Mode selectors
(See page 106 for details.)
6
Cassette tape slot
(See page 111 for details.)
7
Tone and balance knobs
(See page 107 for details.)
8
Radio mode:Frequency tuning
(See page 109 or 110 for details.)
TAPE mode:Rewinding or fast forwarding
(See page 113 for details.)
CD mode:Direct access to a desired program
(See page 120 for details.)

AIR CONDITIONING AND AUDIO
106
Using your audio system: some basics
This section describes some of the basic features of the Lexus
audio system. Some information may not pertain to your
system.
Your audio system works when the ignition key is in the “ACC”
or “ON” position.
NOTICE
To prevent the battery from being discharged, do not
leave the car audio on longer than necessary when the
engine is not running.
(a) Turning the system on and off
Push this knob to turn the audio system on and off. Turn
this knob to adjust the volume.
The system turns on in the last, mode used.
Push “AM”, “FM1 / 2”, “TAPE” or “CD” to turn on that
mode. The selected mode turns on directly.
Push these buttons if you want to switch from one mode to
another.
If the tape or disc is not set, the cassette player or compact disc
player does not turn on.
You can turn off the cassette player by ejecting the cassette
tape. If the audio system was previously off, then the entire
audio system will be turned off when you eject the cassette
tape. If another function was previously playing, it will come on
again.

AIR CONDITIONING AND AUDIO
109
Radio operation
(a) Listening to the radio
Push these buttons to choose either an AM or FM station.
“AM”, “FM1” or “FM2” appears on the display.
Push this button on the upper side to step up the station
band or on the lower side to step down.
Your radio automatically changes to stereo reception when a
stereo broadcast is received. “ST” appears on the display. If
the signal becomes weak, the radio reduces the amount of
channel separation to prevent the weak signal from creating
noise. If the signal becomes extremely weak, the radio
switches from stereo to mono reception. In this case, “ST”
disappears from the display.

AIR CONDITIONING AND AUDIO
11 0(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1−6) and hold
it until a beep is heard. This sets the station to the button
and the button number (1−6) appears on the display.
Each button can store one AM station and two FM stations.
To change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse.(c) Selecting a station
Your Lexus has an electronic tuning radio (ETR). Tune in the
desired station using one of the following methods.
Preset tuning: Push the button (1−6) for the station you want.
The button number (1−6) and station frequency appear on the
display.
Manual tuning: Push the “TUNE SEEK” button for no longer
than 0.5 seconds. Each time you push the button, the radio will
step up or down to another frequency.
Seek tuning: Push the “TUNE SEEK” button and hold it until
you hear a beep. The radio will begin seeking up or down for
a station of the nearest frequency and will stop on reception.
Each time you push the button, the stations will be searched
out one after another.