trunk lexus LS400 1996 Audio System / 1996 LS400: SEAT BELTS, SRS AND CHILD RESTRAINTS

COMFORT ADJUSTMENT
79 When installing a child restraint system, follow the
instructions provided by the manufacturer of the system.
General directions are also provided under the following
illustrations.
CAUTION!
After installing the child restraint system, make sure
it is secured in place. If it is not restrained securely,
it may cause injury to the child in the event of a
sudden stop or accident.
When not using the child restraint system, keep it secured
with the seat belt or place it in the trunk or somewhere other
than in the passenger compartment. This will prevent it
injuring passengers in the event of a sudden stop or
accident.Top strap anchors and locations
Your vehicle has anchors for securing the top strap of a child
restraint system. The anchor nuts are welded beneath the
sheet metal to permit installation of an anchor bracket for a
child restraint system.
To install an anchor bracket, use an 8 mm X 30 mm X 1.25
mm coarse thread metric bolt and a 15 mm (0.6 in.) spacer.
Note that the bolts accompanying many child restraint
systems are not metric. You can damage the anchor nuts on
your vehicle if you force bolts with different thread into the
anchor nuts.