brake fluid lexus LS400 1996 Engine / 1996 LS400: CHASSIS

199
SECTION 6 ± 3
SERVICE PROCEDURES AND
SPECIFICATIONS
Chassis
Specifications 200
Checking brake fluid 202
Checking power steering fluid 203
Checking tire pressure 204
Rotating tires 205
Checking and replacing tires 206
Installing snow tires and chains 208
Replacing wheels 209
Aluminum wheel precautions 210
Suspension and chassis 210

CHASSIS
200
SPECIFICATIONS
± AUTOMATIC TRANSMISSION
Fluid capacity
Drain and refill1.9 L (2.0 qt., 1.7 Imp. qt.)
Fluid typeAutomatic transmission fluid Type T ± II or equivalent
± DIFFERENTIAL
Oil capacity
1.3 L (1.4 qt., 1.1 Imp. qt.)
Oil typeHypoid gear oil API GL±5
Oil viscosityAbove ±18C (0F): SAE 90
Below ±18C (0F): SAE 80W or SAE 80W±90
± BRAKES
Pedal clearance
70 mm (2.8 in.) Min. *1
Pedal freeplay1 ± 6 mm (0.04 ± 0.24 in.)
Brake pad wear limitFront: 3.0 mm (0.12 in.)
Rear: 2.5 mm (0.10 in.)
Parking brake lining wear limit1.0 mm (0.04 in.)
Parking brake adjustment5 ± 7 clicks *2
Fluid typeSAE J1703 or FMVSS No. 116 DOT 3
*1: Minimum pedal clearance when depressed with the pressure of 490 N (50 kgf, 110 lbf.) with the engine running
*2: Parking brake adjustment when depressed with the pressure of 294 N (30 kgf, 66.1 lbf.)

CHASSIS
202
CHECKING BRAKE FLUID
To check the fluid level, simply look at the see±through
reservoir. The level should be between the ªMAXº and
ªMINº lines on the tank.
It is normal for the brake fluid level to go down slightly as the
brake pads wear. So be sure to keep the reservoir filled.
If the reservoir needs frequent refilling, it may indicate a
serious mechanical problem.
If the level is low, add FMVSS No. 116 DOT 3 or SAE
J1703 brake fluid to the brake reservoir.
Remove and replace the reservoir cover by hand. Add brake
fluid up to the ªMAXº line.
Use only newly opened brake fluid. Once opened, brake fluid
absorbs moisture from the air, and excess moisture can
cause a dangerous loss of braking efficiency.
CAUTION!
Take care when filling the reservoir because brake
fluid can harm your eyes and damage painted
surfaces. If fluid gets in your eyes, flush your eyes
with clean water.