heating lexus LS400 1996 Engine / 1996 LS400: STARTING AND DRIVING

STARTING AND DRIVING
127
To ensure that the three±way catalytic converter
and the entire emission control system operate
properly, your vehicle must receive the periodic
inspections required by the Lexus Maintenance
Schedule. For scheduled maintenance
information, refer to the separate ªOwner's Manual
Supplement/Maintenance Schedule.º
ENGINE EXHAUST CAUTION
CAUTION!

Avoid inhaling the engine exhaust. It contains
carbon monoxide, which is a colorless and
odorless gas. It can cause unconsciousness or
even death.
Make sure the exhaust system has no holes or
loose connections. The system should be checked
from time to time. If you hit something, or notice a
change in the sound of the exhaust, have the
system checked immediately.
Do not run the engine in a garage or enclosed area
except for the time needed to drive the vehicle in or
out. The exhaust gases cannot escape, making this
a particularly dangerous situation.
Do not remain for a long time in a parked vehicle
with the engine running. If it is unavoidable,
however, do so only in an unconfined area and
adjust the heating or cooling system to force
outside air into the vehicle.
Keep the trunk lid closed while driving. An open or
unsealed trunk lid may cause exhaust gases to be
drawn into the vehicle. If you must drive with the
trunk lid open to accommodate a large object, close
the windows, open all the dashboard vents and
have the heating or cooling system deliver fresh air
into the vehicle by turning the fan to high speed
with the air intake control button in the OUTSIDE
AIR mode.
To allow proper operation of your vehicle's
ventilation system, keep the inlet grilles in front of
the windshield clear of snow, leaves, or other
obstructions.
If you smell exhaust fumes in the vehicle, drive with
the windows open and the trunk lid closed. Have
the cause immediately located and corrected.

STARTING AND DRIVING
135
Do not continue hill climbing or hard towing for a
long time in the ª2º or ªLº position. This may cause
severe automatic transmission damage from
overheating. To prevent such damage, ª3º position
should be used in hill climbing or hard towing.
(d) Backing up

ªRº (Reverse) positionBrake pedal
1. Bring the vehicle to a complete stop.
2. With the brake pedal held down with your foot, shift the
selector lever to the ªRº position.
NOTICE
Never shift into reverse while the vehicle is moving.
(e) Parking

ªPº (Park) positionBrake pedal
Parking brake pedal
1. Bring the vehicle to a complete stop.
2. Depress the parking brake pedal fully.
3. With the brake pedal held down with your foot, shift the
selector lever to the ªPº position.
CAUTION!
While the vehicle is moving, never attempt to move
the selector lever into ªPº under any circumstances.
Serious mechanical damage and loss of vehicle
control may result.