instrument cluster lexus LS400 1998 Audio System / LEXUS 1998 LS400 OWNER'S MANUAL (OM50498U)

PICTORIAL INDEX
viii
INSTRUMENT CLUSTER (Vehicles sold in U. S. A.)
00L0461

PICTORIAL INDEX
x
INSTRUMENT CLUSTER (Vehicles sold in Canada)
00L0471

KEYS AND DOORS
10
11L023-3
Do not bend the key grip.
Do not cover the key grip with any material that cuts off
electromagnetic waves.
Do not knock the key hard against other objects.
Do not leave the key exposed to high temperatures for a long
period, such as on the dashboard and hood under the direct
sunlight.
Do not put the key in water or wash it in an ultrasonic washer.
Do not use the key with electromagnetic materials.
ENGINE IMMOBILISER SYSTEM
11L0243
The engine immobiliser system is a theft prevention system.
When you insert the key in the ignition switch, the transponder
chip in the key’s head transmits an electronic code to the vehicle.
The engine will start, only when the electronic code in the chip
corresponds to the registered ID code for the vehicle.
The system is automatically set when the key is removed from the
ignition switch. At this time, the security indicator light at the
bottom of the instrument cluster flashes. When you insert the key in
the ignition switch, the security indicator light goes out and the
system is canceled automatically, which enables the engine to start.
For your Lexus dealer to make you a new key with builtin
transponder chip, your dealer will need your key number and master
key. However, there is a limit to the number of additional keys your
Lexus dealer can make for you.

SWITCHES
22
HEADLIGHT SWITCH
12L001
To turn the lights on, twist the knob on the end of the lever.
FIRST CLICKSTOP: Only the parking, tail, license plate, side
marker and instrument panel lights turn on.
SECOND CLICKSTOP: Headlights also turn on.
THIRD CLICKSTOP (”AUTO”): The headlights and all other
lights automatically turn on depending on the darkness of the
surroundings.*
Vehicles sold in U.S.A.: When the headlights are on, the headlight
indicator lights up in the instrument cluster.
Vehicles sold in Canada: When the tail lights are on, the tail light
indicator lights up in the instrument cluster.
Manually twist the knob to the second clickstop to turn on the
headlights if they are needed immediately when entering a dark
tunnel, parking structure, etc.
12L002
The automatic light control sensor is on top of the driver’s side
instrument panel.
Do not place anything on the instrument panel, and/or do not affix
anything on the windshield to block this sensor.
When the headlights come on, the lights automatically turn off about
30 seconds after any of the doors is opened and closed with the
ignition key turned to the ”ACC” or ”LOCK” position.** To turn
them on again, turn the ignition key to the ”ON” position, or turn the
headlight switch off and then twist the knob until the first or second
clickstop. If you are going to park for over one week, make sure the
headlight switch is off.
When the headlight switch is on with all the doors locked, pushing
the ”LOCK” button on the wireless remote control key turns off the
headlights.
NOTE: *The operating condition or sensitivity can be changed.
**The time before turning off the lights can be changed. Ask your
Lexus dealer for details.

SWITCHES
24
HEADLIGHT DIMMER AND TURN
SIGNAL SWITCH
12L003
For high beam, push the lever forward. Pull it back for low
beam. For the headlight flasher, pull it further back.
A blue light in the instrument cluster indicates high beam or
headlight flasher is on.
The headlight flasher works even when the headlight switch is off.
12L004
For signaling turns, move the lever up or down in the
conventional manner.
The ignition key must be in the ”ON” position.
The turn signal is selfcancelling after a turn, but after a lane change,
you may have to cancel it by hand. You can also signal a lane change
by moving the turn signal lever partway and holding it there.
If the green light in the instrument cluster flashes faster than normal,
it indicates that the front or rear turn signal bulb has burned out. If
this indicator light does not come on, the fuse or the indicator light
itself has probably failed.

STARTING AND DRIVING
160
AUTOMATIC TRANSMISSION
Your automatic transmission has a shift lock system to minimize
the possibility of incorrect operation. This means you can only
shift out of ”P” position when the brake pedal is depressed with
the ignition switch in ”ON” position. ()
31L078
The shift position is displayed on the instrument cluster.P:Parking, engine starting and key removal position
R:Reverse position
N:Neutral position
D:Normal driving position (Shifting into overdrive possible)
4:Position for engine braking (Shifting into overdrive not
possible)
When the cruise control is being used, even if you downshift
from ”D” to ”4”, engine braking will not be applied because
the cruise control is not cancelled. For the operation to
decrease the vehicle speed, see page 170.
3, 2:Position for more powerful engine braking
L:Position for maximum engine braking

STARTING AND DRIVING
162
31L008-3
1
Power mode 2
Normal mode 3
Snow mode
2. Set the driving pattern selector switch to the ”Normal”
position.
Your transmission has a driving pattern selector switch which allows
you to select ”Power”, ”Normal” or ”Snow” mode to suit your
driving condition. For ordinary driving, Lexus recommends that
you use the ”Normal” position to improve fuel economy.
3. For more powerful acceleration and sporty driving, use the
”Power” position.
In the POWER position, the ”ECT PWR” light in the instrument
cluster is on and the transmission is shifted up at higher vehicle
speeds and shifted down more responsively than in the NORMAL
position.
For ”Snow” mode, see ”Electronic Throttle Control System” on
page 167.
31l0552
1
”D” (Drive) position 2
Brake pedal
4. With your foot holding down the brake pedal, shift the
selector lever to ”D”.
Always use the ”D” position to improve fuel economy and quiet
driving. Only in this position, shifting into the overdrive gear is
possible. However, while the engine coolant temperature is low, the
transmission will not shift into the overdrive gear even in the ”D”
position. (See ”(b) Using engine braking” and ”(f) Good driving
practice” for exceptions.)
CAUTION
Never put your foot on the accelerator pedal while shifting.

STARTING AND DRIVING
168In the power mode, the ”ECT PWR” light in the instrument cluster
is on and the transmission is shifted up at higher vehicle speeds and
shifted down more responsively than is the normal mode.
To return to the normal mode, push the driving pattern selector
switch lightly on the ”SNOW” side.
Snow mode: For slippery road surfaces such as in snow. In this
mode, the spinning of the rear wheels is controlled appropriately.
When you push the driving pattern selector switch on the ”SNOW”
side, the snow mode is turned on and the ”ECT SNOW” light in the
instrument cluster comes on.
To return to the normal mode, push the driving pattern selector
switch on the ”SNOW” side again.
When you turn the ignition switch off in the snow mode, the mode
automatically changes to the normal mode.
CRUISE CONTROL
The cruise control allows you to cruise the vehicle at a desired
speed over 40 km/h (25 mph) with your foot off the accelerator
pedal.
Your cruising speed can be maintained although a slight speed
change may occur when driving up or down a gradient, within the
limits of engine performance. On steeper hills, a great speed change
will occur so it is better to drive without the cruise control.
When the cruise control is on, the driving pattern of the automatic
transmission is fixed in the normal position, regardless of the
position of the selector switch.
CAUTION
To help maintain maximum control of your vehicle, do not
use the cruise control when driving in heavy or varying
traffic, or on slippery (rainy, icy or snowcovered) or
winding roads.
Avoid vehicle speed increases when driving downhill. If the
vehicle speed is too fast in relation to the cruise control set
speed, cancel the cruise control then downshift the
transmission to use engine braking to slow down.

STARTING AND DRIVING
169
Turning on the system
31L067
To operate the cruise control, push the main switch. This turns the
system on. The indicator light in the instrument cluster shows that
you can now set your desired cruising speed. Another push on the
switch will turn the system completely off.
When the ignition key is turned off, the main switch is also
automatically turned off. To use the cruise control again, push the
main switch again to turn it on.
CAUTION
To avoid accidental cruise control engagement, keep the main
switch off when not using the cruise control.
Setting at a desired speed
31L068
The transmission must be in ”D” or ”4” before you set the cruise
control speed.
Bring the vehicle to the desired speed, press the control lever
downward in the ”SET/COAST” direction and release it. This sets
the vehicle at that speed. Now you may take your foot off the
accelerator pedal. If you need acceleration for example, when
passing depress the accelerator pedal enough for the vehicle to
exceed the set speed. When you release the accelerator pedal, the
vehicle will return to the speed set prior to the acceleration.
Cancelling the preset speed
You can cancel the preset speed by either of the following:
a. Pulling the control lever in the ”CANCEL” direction.
b. Depressing the brake pedal.

STARTING AND DRIVING
171
Cruise control failure warning
If the ”CRUISE” indicator light in the instrument cluster flashes
when using the cruise control, push the main switch to turn the
system off and then push it again to turn it on.
If any of the following conditions then occurs, there is some trouble
in the cruise control system.
The indicator light does not come on.
The indicator light flashes again.
The indicator light goes out after it comes on.
If this is the case, contact your Lexus dealer and have your Lexus
inspected.
ELECTRONICALLY MODULATED
AIR SUSPENSION
(U.S.A. ONLY)
This electronically modulated air suspension adjusts the
damping effect on the shock absorbers and the vehicle height.
This adjustment is automatically made in response to the driving
conditions to provide good riding comfort and stability in all
driving conditions.
(a) Vehicle height adjustment
31L015-3
This system maintains a stable vehicle height, regardless of
occupants and luggage weight. You can select one of the
following modes using a selector switch.