STARTING AND DRIVING
173
TRACTION CONTROL SYSTEM
The traction control system automatically helps control the
spinning of the rear wheels which may occur when accelerating
on slippery road surfaces, thus assisting driver to control the
driving power of the rear wheels.
31L052 1
When you turn the ignition switch on, this system always turns
on. Leave the system on during ordinary driving so that it can
operate when needed. When traction control is applied, the slip
indicator light blinks.
When the traction control system is operating, you may feel
vibration of your vehicle, caused by operation of the brakes. This
indicates the system is functioning properly.
When getting the vehicle out of mud or new snow, etc. the traction
control system will help operate to prevent the wheels from
spinning.
To turn off the traction control system, see page 174.
CAUTION
Under certain slippery road conditions, full traction of the
vehicle and power to the rear wheels cannot be maintained,
even though the traction control system is in operation. Do not
drive the vehicle under any speed or maneuvering conditions
which will cause the vehicle to lose traction. In situations
where the road surface is covered with ice or snow, your
vehicle should be fitted with snow tires or tire chains. Always
drive at an appropriate and cautious pace.