reset lexus LS400 2000 Engine / LEXUS 2000 LS400 OWNER'S MANUAL (OM50533U)

For detailed information, refer to the description given in each section\
.
PICTORIAL INDEX
xi
Page
1 Engine coolant temperature gauge 59. . . . . . .
2 Tachometer 60
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Automatic transmission indicator lights 289 .
4 Turn signal indicator light 39
. . . . . . . . . . . . . . .
5 Headlight indicator light 35
. . . . . . . . . . . . . . . . .
6 Headlight high beam indicator light 39 . . . . . .
7 Fuel gauge 57
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 Low fuel level warning light 68
. . . . . . . . . . . . . .
9 Cruise control indicator light 305
. . . . . . . . . . .
10 Discharge warning light 67
. . . . . . . . . . . . . . . . .
11 Driver's seat belt reminder light 66
. . . . . . . . . .
12 ODO/TRIP RESET button 61
. . . . . . . . . . . . . . . .
13 Open door warning light 68
. . . . . . . . . . . . . . . . . Page
14 SRS warning light
66
. . . . . . . . . . . . . . . . . . . . . . .
15 Brake system warning light 65
. . . . . . . . . . . . . .
16 Odometer and trip meter 61
. . . . . . . . . . . . . . . .
17 Multi information display 70
. . . . . . . . . . . . . . . .
18 Slip indicator light 312, 316
. . . . . . . . . . . . . . . . .
19 Malfunction indicator lamp 67
. . . . . . . . . . . . . .
20 Vehicle skid control system OFF
indicator light 317 . . . . . . . . . . . . . . . . . . . . . . . . .
21 Anti±lock brake system warning light 68 . . . . .
22 Security indicator light 216
. . . . . . . . . . . . . . . . .
23 Instrument panel light control 79
. . . . . . . . . . . .
24 Snow mode indicator light 303
. . . . . . . . . . . . . .
25 Power mode indicator light 303
. . . . . . . . . . . . .
26 Height control indicator light 312
. . . . . . . . . . .

For detailed information, refer to the description given in each section\
.
PICTORIAL INDEX
xiii
Page
1 Engine coolant temperature gauge 59. . . . . . .
2 Tachometer 60
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Automatic transmission indicator lights 289 .
4 Turn signal indicator light 39
. . . . . . . . . . . . . . .
5 Tail light indicator light 35
. . . . . . . . . . . . . . . . . .
6 Headlight high beam indicator light 39 . . . . . .
7 Fuel gauge 57
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 Low fuel level warning light 68
. . . . . . . . . . . . . .
9 Cruise control indicator light 305
. . . . . . . . . . .
10 Discharge warning light 67
. . . . . . . . . . . . . . . . .
11 Driver's seat belt reminder light 66
. . . . . . . . . .
12 ODO/TRIP RESET button 79
. . . . . . . . . . . . . . . .
13 Open door warning light 68
. . . . . . . . . . . . . . . . . Page
14 SRS warning light
66
. . . . . . . . . . . . . . . . . . . . . . .
15 Brake system warning light 65
. . . . . . . . . . . . . .
16 Odometer and trip meter 61
. . . . . . . . . . . . . . . .
17 Multi information display 70
. . . . . . . . . . . . . . . .
18 Slip indicator light 312, 316
. . . . . . . . . . . . . . . . .
19 Malfunction indicator lamp 67
. . . . . . . . . . . . . .
20 Vehicle skid control system
OFF indicator light 317 . . . . . . . . . . . . . . . . . . . . .
21 Anti±lock brake system warning light 68 . . . . .
22 Security indicator light 216
. . . . . . . . . . . . . . . . .
23 Instrument panel light control 79
. . . . . . . . . . . .
24 Snow mode indicator light 303
. . . . . . . . . . . . . .
25 Power mode indicator light 303
. . . . . . . . . . . . .

GAUGES, METERS AND SERVICE REMINDER INDICATORS
62This meter displays the odometer and two trip
meters. To change the mode indication, push the
ºODO/TRIPº button.
The odometer records the total distance the vehicle
has been driven. The twin trip meter records two
different distances independently.
For example, you can use one meter to calculate the fuel
economy
and the other to measure the distance on each
trip.
To change the trip meter indication from one trip to
the other, push the ºODO/TRIPº button. To set the
A trip meter to zero, display the A meter reading,
then push the ºRESETº button. The same applies
for the B trip meter.
The data of trip meters will be cancelled if the electrical
power source is disconnected.
SERVICE REMINDER
INDICATORS AND WARNING BUZZERS

GAUGES, METERS AND SERVICE REMINDER INDICATORS
72
W24

When the fuel gauge indicates around ºFº
W25W25

When the fuel gauge indicates around middle
W26

When the fuel gauge indicates around ºEº
Available driving distance with the remaining fuel is
calculated and displayed depending on the amount
of remaining fuel.
Average fuel consumption
W27W27
The average fuel consumption is calculated and
displayed based on the total driving distance and
the total fuel consumption with the engine running.
The value is updated every 10 seconds.
To calculate from the beginning, push the ºRESETº
button.Current fuel consumption
W28W28

GAUGES, METERS AND SERVICE REMINDER INDICATORS
74
W30W30
The driving distance after being refueled with more
than 10 L (2.6 gal., 2.2 lmp.gal.) is displayed.
When refueling, be sure to stop your vehicle and turn the
ignition switch off.
 Elapsed time
W31W31
The total time during the engine running is
displayed.
When the engine is started again after the ignition is off,
the driving time is added to the previous value. Up to 99
hours 59 minutes can be displayed. When the driving
time exceeds 99 hours 59 minutes, the display returns
to 0 and recounting starts.
To count from the beginning, push the ºRESETº button.
Average vehicle speed
W32W32
The average vehicle speed is calculated and
displayed based on the total driving distance and
the total driving time with the engine running.
The displayed value is updated every 10 seconds.
To calculate from the beginning, push the ºRESETº
button.

INTERIOR EQUIPMENT
88
CLOCK
14L46
To reset the hour, press the ºHº button. To reset the
minutes, press the ºMº button. To adjust the time to
the nearest hour, press the º:00º button.
For example, if the º:00º button is pressed when the time
is between 9:30 ± 9:59 or between 10:01 ± 10:29, the
time will change to 10:00.
If the electrical power source has been disconnected
from the clock, the time display will automatically be set
to 1:00 (one o'clock).
For vehicles equipped with Navigation System, refer
to the separate ºOwner's Manual for Navigation
Systemº.

AUDIO
243
1Turning the system on and adjusting volume
(See page 244 for details.)
2Stopping and ejecting a cassette tape
(See page 255 for details.)
3Function buttons
1 ± 6: Station selector buttons
(See page 252 for details.)
SCAN: Scan tuning
(See page 255 for details.)
P. SCAN: Preset scan tuning (See page 255 for details.)
4Display of functions in TAPE mode

:
Side change
(See page 257 for details.)
: DOLBY NR
(See page 257 for details.)
 :Rewinding
(See page 258 for details.)


:Fast forwarding
(See page 258 for details.)
RPT: Automatic repeat
(See page 259 for details.)
SKIP: Automatic skip of blank portions of tape
(See page 259 for details.)
SCAN: Scan selection
(See page 260 for details.)
4
Display of functions in CD mode
:Disc selection
(See page 267 for details.)
 :Reversing
(See page 271 for details.)


:Fast forwarding
(See page 271 for details.)
RPT: Automatic repeat
(See page 272 for details.)
RAND: Random access
(See page 272 for details.)
SCAN: Scan selection
(See page 269 for details.)
5
Mode selectors
(See page 246 for details.)
6Cassette tape slot
(See page 255 for details.)
7Automatic sound levelizer
(Except Nakamichi model)
(See page 248 for details.)
8Tone and balance knobs
(See page 247 for details.)
9Radio mode: Frequency tuning
( S e e p a g e 251 o r 253 f o r
details.)
10TAPE mode: Direct access to a desired

AUDIO
252
20L046±1
Push this button on the upper side to step up the
station band or on the lower side to step down.
Your radio automatically changes to stereo reception
when a stereo broadcast is received. ºSTº appears on
the display. If the signal becomes weak, the radio
reduces the amount of channel separation to prevent the
weak signal from creating noise. If the signal becomes
extremely weak, the radio switches from stereo to mono
reception. In this case, ºSTº disappears from the
display. (b) Presetting a station

AUDIO
253
20L047a
1. Tune in the desired station.
2. Push one of the station selector buttons ( 1±6 )
and hold it until a beep is heard. This sets the station
to the button and the button number ( 1±6 ) appears
on the display.
Each button can store one AM station and two FM
stations. To change the preset station to a different one,
follow the same procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown
fuse. (c) Selecting a station
Your Lexus has an electronic tuning radio ( ETR ). Tune
in the desired station using one of the following methods.

AUDIO
254
20L056a
Preset tuning: Push the button ( 1±6 ) for the station you
want. The button number ( 1±6 ) and station frequency
appear on the display.
Manual tuning: Push the ºTUNE SEEKº button briefly.
Each time you push the button, the radio will step up or
down to another frequency.
Seek tuning: Push the ºTUNE SEEKº button and hold
it until you hear a beep. The radio will begin seeking up
or down for a station of the nearest frequency and will
stop on reception. Each time you push the button, the
stations will be searched out one after another.