OCCUPANT RESTRAINT SYSTEMS
217
CAUTION
Do not slide the seat or adjust the head restraint after
securing the child restraint system.
Make sure the top strap is securely latched, and
check that the child restraint system is secure by
pushing and pulling it in different directions.
Follow all the installation instructions provided by its
manufacturer.
Installation with child restraint lower
anchorages
16L627a
Lower anchorages for the child restraint systems
complying with the FMVSS225 or CMVSS210.2
specifications are installed in the rear seat.
The anchorages are installed in the clearance between the
seat cushion and seatback of both outboard rear seats.
Child restraint system comp lying with the FMVSS213 or
CMVSS213 specification can be fixed to these anchorages. In
this case, it is not necessary to fix the child restraint system
with a seat belt on the vehicle.
OCCUPANT RESTRAINT SYSTEMS
219
16L629a
Canada only
Type B 2. Widen the gap
between the seat cushion and seatback
slightly and confirm the position of the lower anchorages
near the button on the seatback.
Type A—
3. Latch the hooks of lower straps onto the anchorages
and tighten the lower straps.
Type B—
3. Latch the buckles onto the anchorages.
For owners in Canada — The symbol on a child restraint
system indicates the presence of a lower connector system.
If your child restraint system has a top strap, it should be
anchored. (For the installation of the top strap, see “Using a top
strap” on page 215.)
For installation details, refer to the instruction manual
equipped with each product.
OCCUPANT RESTRAINT SYSTEMS
220
CAUTION
When using the lower anchorages for the child
restraint system, be sure that there are no irregular
objects around the anchorages or that the seat belt is
not caught.
Push and pull the child restraint system in different
directions to be sure it is secure. Follow all the
installation instructions provided by its
manufacturer.
When using the lower anchorages for a child restraint
system, ensure that the seat is moved to the
rear most position, with the seatback close to the
child restraint system.
After securing the child restraint system, never slide
the seat.
DRIVING POSITION MEMORY SYSTEM
A microcomputer will memorize the position of the driver’s
seat, the height of the head restraint of the driver’s seat, the
seat cushion length of the driver’s seat, the height of the
shoulder belt anchor of the driver’s seat belt, and the positions
of the tilt and telescopic steering, and outside rear view mirrors.
Three dif ferent driving position profiles can be entered into the
computer’s memory.
Recording a driving position in the computer’s memory can
only be done when the ignition switch is in the “ON” position
and the selector lever is in the “N” or “P” position.
Setting the driving position
16L299
1. Adjust the driver’s seat, driver’s head restraint height
and seat cushion length, driver’s shoulder belt anchor, tilt
and telescopic steering and outside rear view mirrors to
the desired position.
