page 54 LEXUS LS430 2005 Owners Manual

IMPORTANT INFORMATION ABOUT YOUR LEXUS
v
Accessories, spare parts and modification of
your Lexus
A wide variety of non−genuine spare parts and accessories for
Lexus vehicles are currently available in the market. You
should know that Toyota does not warrant these products and
is not responsible for their performance, repair, or
replacement, or for any damage they may cause to, or adverse
effect they may have on, your Lexus vehicle.
This vehicle should not be modified with non −genuine Lexus
products. Modification with non −genuine Lexus products
could af fect its performance, safety or durability, and may even
violate governmental regulations. In addition, damage or
performance problems resulting from the modification may not
be covered under warranty.
Spark ignition system of your Lexus
The spark ignition system in your Lexus meets all
requirements of the Canadian Interference− Causing
Equipment Standard.
Installation of a mobile twoway radio system
As the installation of a mobile two −way radio system in your
vehicle could affect electronic systems such as the multiport
fuel injection system/sequential multiport fuel injection system,
cruise control system, dynamic radar/laser cruise control
system, anti− lock brake system, SRS airbag system and seat
belt pretensioner system, be sure to check with your Lexus
dealer for precautionary measures or special instructions
regarding installation.
Tires and loading on your Lexus
Underinflated or overinflated tire pressure and the
excess load may result in the deterioration of steering
ability and braking ability, leading to an accident. Check
the tire inflation pressure periodically and be sure to
keep the load limits given in this Owner’s Manual. For
details about tire inflation pressure and load limits, see
pages 468 and 393.
Scrapping of your Lexus
The SRS airbag and seat belt pretensioner devices in your
Lexus contain explosive c hemicals. If the vehicle is scrapped
with the airbags and seat belt pretensioners left as they are,
this may cause an accident such as a fire. Be sure to have the
system of the SRS airbag and seat belt pretensioner removed
and disposed of by a qualified service shop or by your Lexus
dealer before you scrap your vehicle.

HOW TO USE THIS MANUAL
vi
HOW TO USE THIS MANUAL
The contents of this manual are explained briefly on this
page to help you make the best use of the manual. Please
read this page and the rest of the Owner’s Manual
carefully to make sure you fully understand the operation
of your vehicle.
This will help you enjoy safe and comfortable driving.
TABLE OF CONTENTS
The table of contents and the pictorial index provide easy
reference to the appropriate pages.
BASIC OPERATION QUICK REFERENCE
Operation of basic equipment is briefly explained in an easily
understandable way for quick reference.
SECTION 1 INSTRUMENTS AND CONTROLS
The vehicle’s equipment is divided into the 7 groups listed
below. Use of the equipment is explained, including any points
you should pay particular attention to.
1. Keys and doors
2. Switches
3. Gauges, meters and service reminder indicators
4. Interior equipment
5. Exterior equipment
6. Occupant restraint systems
7. Steering wheel and mirrors
SECTION 2 AIR CONDITIONING AND AUDIO
The features of the vehicle’s air conditioning and audio are
explained in detail. Be sure to read this section so that you can
make full use of them.
SECTION 3 STARTING AND DRIVING
Starting the engine, driving, stopping, operation of features
affecting vehicle handling, hints on vehicle safety and safe
driving techniques are all explained. Please read everything
in this section, and remember − drive safely!
SECTION 4 IN CASE OF AN EMERGENCY
This section explains what to do in the event of an urgent
situation such as the engine not starting or getting a flat tire,
etc. If such a problem occu rs, check the contents of this
Owner’s Manual and follow the instructions given.
SECTION 5 MAINTENANCE
This section explains the importance of regular maintenance.
Regular and periodic inspection and maintenance of your
Lexus will help to keep your vehicle in its best condition.
SECTION 6 SERVICE PROCEDURES AND
SPECIFICATIONS
Simple maintenance procedure and service data are provided
here for your reference should you wish to perform inspection
and maintenance yourself.
INDEX
The page number is listed for each item in the Owner ’s Manual
so that you can rapidly find the item and page you are
searching for.

QUICK REFERENCE
5
NOTE:
Vehicles
with the cruise control: When the cruise control is being used, even if \
you downshift from “D” or “6” (sixth range) to “5” (\
fifth
range), or “D” or “5” (fifth range) to “4” (fourth\
range), engine braking will not be enabled because the cruise control \
is not cancelled.
For vehicle speed reduction, see page 328. Vehicles with the dynamic radar/laser cruise control: When the cruise con\
trol is be ing
used in the conventional (fixed speed) cruise control mode or in the vehicle −to− vehicle distance control mode, even if you downshift
from “D” or “6” (sixth range) to “5” (fifth range) or D\
”, or “5” (fifth range) to “4” (fourth range), engine\
braking will not be enabled because
the cruise control is not cancelled. For vehicle speed reduction, see p\
ages 359 and 344.

KEYS AND DOORS
10
KEYS
Vehicles equipped with smart key system
(Type A)
11L218
1Mechanical keys (attached to the master keys)
These keys work for the doors, trunk, trunk main
switch, glove box and trunk storage extension door,
but cannot start the engine.
2Mechanical key (attached to the valet key) This key
works for the doors, but cannot start the engine and
does not work for the trunk, trunk main switch, glove
box and trunk storage extension door.
3 Key number plate Keep the plate in a safe place
such as your wallet, not in the vehicle.
4Smart keys (master keys) These keys will activate
the smart key system. They will not work for the trunk
main switch, glove box and trunk storage extension
door.
5Smart key (valet key) This key does not work for the
trunk, trunk main switch, glove box and trunk storage
extension door. This key cannot activate the smart
key system.
Before you use these keys, be sure to read “Smart key system”
on page 20.
11L219
 Using a mechanical key
1
Lock switch
2Mechanical key
When you use the mechanical key included on the side of the
smart key, slide the lock switch in the arrow direction and pull
the key as shown. To put the key back, slide the lock switch
in the arrow direction and slide the key back. Be sure to put the
key back when not in use.

KEYS AND DOORS
12
Starting the engine using an engine start flat
key
11L251a
1. Remove the engine start flat key from the key case.
2. Insert it into the ignition switch.
The flashing security indicator light goes out. This means the
engine immobilizer system is automatically canceled. (For
details, see “Engine immobilizer system” on page 17.)
NOTICE
Do not let the key case become bent as the flat keys
may fall out or become bent also.
 The flat keys are designed for emergency use only, so
do not use them regularly instead of the other master
keys.
11L220
NOTICE
When using a key containing a transponder chip,
observe the following precautions:
 When starting the engine, do not use the key with a
key ring resting on the key grip and do not press the
key ring against the key grip. Doing so may prevent
the engine from starting, or may cause the engine to
stop soon after it starts.

KEYS AND DOORS
15
Flat key
11g039c
As a transponder chip is built in its key case, you can start
the engine with this key.
The flat key works in every lock.
A transponder chip for the engine immobilizer system has
been placed in the key case of the flat key. This chip is required
for the system to function correctly, so be careful not to lose this
key. If you make your own duplicate key, you will not be able
to cancel the system or start the engine.
Insert your flat key plate in its key case as shown. We
recommend that you always carry this with you for emergency
use. Do not leave it in your vehicle.
Starting the engine using a flat key
11L050a
1. Remove the key plate from the key case.
2. Insert the key plate into the ignition switch. The security
indicator light keeps flashing.
3. Bring the key case closer to the ignition switch within 10
seconds as indicated by the arrow head. The indicator light
goes out. This means the engine immobilizer system is
automatically canceled. (For details, see “Engine immobilizer
system” on page 17.) You can put the key case away then. You
cannot cancel the engine immobilizer system if 10 seconds
have passed after you inserted the key plate. You need to
remove the key plate from the ignition switch and try it again
from the step 2.
4. Start the engine within 20 seconds after the security
indicator light goes out. You cannot start the engine if 20
seconds have passed after the security indicator went off. You
need to remove the key plate from the ignition switch and try
it again from the step 2.

KEYS AND DOORS
17
11L358
Do not bend the key grip or flat key.
 Do not cover the key grip or flat key with any material
that cuts off electromagnetic waves.
 Do not knock the key or flat key hard against other
objects.
 Do not leave the key or flat key exposed to high
temperatures for a long period, such as on the
dashboard or hood under direct sunlight.
 Do not put the key or flat key in water or wash it in an
ultrasonic washer.
 Do not use the key or flat key with electromagnetic
materials.
ENGINE IMMOBILIZER SYSTEM
Deactivation using the smart key system
11L222a
The engine immobilizer system is a theft prevention
system. When you enter the vehicle carrying a smart key
and push the ignition switch, the electronic code in the
key is automatically checked to determine whether it
corresponds to the registered ID code for the vehicle. If
the key indicator light comes on after the ID code
verification, you can start the engine.
This system is automatically set when the ignition switch is
turned to the “LOCK” position. At this time, the security
indicator light flashes. When you push the ignition switch, the
security indicator light goes out and the system is cancelled
automatically, which enables the engine to start.
The engine immobilizer system cannot be cancelled if the
cancel switch of the smart key system is turned on. For details,
see “Deactivating the smart key system” on page 34.

KEYS AND DOORS
18For your Lexus dealer to make you a new key with built
−in
transponder chip, your dealer will need your key number and
master key. However, there is a limit to the number of
additional keys your Lexus dealer can make for you.
If you make your own duplicate key, you will not be able
to cancel the system or start the engine.
NOTICE
Do not modify, remove or disassemble the engine
immobilizer system. If any unauthorized changes or
modifications are made, proper operation of the system
cannot be guaranteed.
Deactivation using the key
11L223a
 1 Type A 2Type B
The engine immobilizer system is a theft prevention
system. When you insert the key in the ignition switch, the
transponder chip in the key’s head transmits an electronic
code to the vehicle. The engine will start only when the
electronic code in the chip corresponds to the registered
ID code for the vehicle.
The system is automatically set when the key is removed from
the ignition switch. At this time, the security indicator light
flashes. When you insert the key in the ignition switch, the
security indicator light goes out and the system is canceled
automatically, which enables the engine to start.
The transponder chip of the flat key is in its key case. You can
cancel the engine immobilizer system using the flat key. (For
details, see pages 12 and 15.)

11L229c
KEYS AND DOORS
20
SMART KEY SYSTEM (Master keys only)
 1Locking and unlocking 2Unlocking the trunk lid 3Key indicator 4Starting the engine
By carrying a smart key, which is different from a conventional key that is inserted in the key\
holes or ignition switch, you
can lock and unlock the doors, unlock the trunk and start the engine.
For locking the doors, see “Locking the doors with the smart key system”\
on page 25. For unlocking the doors, see “Unlocking t he
door(s) with smart key system” on page 28. For unlocking the trunk lid, see \
“Unlocking the trunk lid with smart key system” on page
31. For starting the engine, see “Smart ignition system with steerin\
g lock” on page 298.
If the smart key battery is discharged, the smart key system cannot be use\
d. Use the mechanical key integrated into the smart key
by inserting it in the door keyhole to lock or unlock doors and into the\
trunk lid keyhole to unlock the trunk lid. To start t he engine,
insert the smart key. In order to activate the smart key system, the battery should be replaced. For details, see “Replacing the battery
(Type A)” on page 42.
You can deactivate the smart key system by using the cancel switch. In th\
is case, all the functions in the smart key system wi ll be
deactivated. For details, see “Deactivating the smart key system” on page 34.\

KEYS AND DOORS
22
11L230a
When a door is opened and closed with the ignition
switch in the “ACC” or “ON” position and with the
selector lever in the “P” position, and then the smart key
is carried outside of the vehicle.
Inside alarm: One chime
Outside alarm: 3 beeps
Multiinformation display: “Key is not Detected”
See page 100 for details.
11L231a
 When you attempted to lock the door(s) with the smart
key still in the vehicle or without turning off the ignition
switch.
Outside alarm: One beep (sounds for 2 seconds)
See page 26 and 27 for details.