tow LEXUS LX470 2006 Owners Manual

FOREWORD
i
Congratulations on your selection of this Lexus. In Lexus vehicles we h\
ave invested all our engineering and design resources; all
the know−
how we have gained in over 60 years of making automobiles; the highest m\
otivation of our most talented employees; and
our tradition of incessant striving toward ever greater quality.
This Owner’s Manual explains the features of your new Lexus. Please read it and follow the \
instructions carefully so that
you can enjoy many years of safe motoring.
When it comes to service, remember that your Lexus dealer knows your veh\
icle very well and is interested in your complete
satisfaction. Your Lexus dealer will provide quality maintenance and any other assistan\
ce you may require.
If there is not a Lexus dealer near you, please call the following numbe\
r:
U.S. OWNERS
If you need emergency assistance for any reason, please call the followi\
ng number:
 When traveling in the U.S. mainland or Canada :
Lexus Roadside Assistance Tollfree: 180025LEXUS or 18002553987
 HAWAII:
Servco Automotive Roadside Assistance/Customer Services Tollfree: 180025LEXUS or 18002553987
CANADIAN OWNERS
 When traveling in Canada or the U.S. mainland :
Lexus Roadside Assistance/Customer Service Tollfree: 180026LEXUS or 18002653987
Please leave this Owner’s Manual in this vehicle at the time of resale. The next owner will nee\
d this information also.
All information and specifications in this manual are current at the time o\
f printing. However, because of the Lexus policy of continual
product improvement, we reserve the right to make changes at any time wi\
thout notice.
Please note that this manual applies to all models and explains all equipment, \
including options. Therefore, you may find
some explanations for equipment not installed on your vehicle.
Please access our websites for further information.
 The U.S. mainland www.lexus.com
 Hawaii www.servcolexus.com
 Canada www.lexus.ca

lxu
GAS STATION INFORMATION
Fuel selection:
Select Octane Rating 87 (Research Octane Number 91) or
higher. For improved vehicle performance, the use of
premium unleaded gasoline with an Octane Rating of 91
(Research Octane Number 96) or higher is recommended.
 Fuel tank capacity:
96 L (25.4 gal., 21.1 lmp.gal.)
 Engine oil:
“Toyota Genuine Motor Oil” or equivalent
Oil grade: ILSAC multigrade engine oil.
Recommended oil viscosity − SAE 5W−30 if normal
temperatures are below 38 C (100F)
Oil capacity: L (qt., lmp.qt.)
Drain and refill with filter 6.8 (7.2, 6.0)
without filter 6.4 (6.8, 5.6)
See page 410 for detailed information. 
Engine coolant:
Capacity: L (qt., lmp.qt.) 15.4 (16.3, 13.6)
Coolant type − “Toyota Super Long Life Coolant” or similar
high quality ethylene glycol based non −silicate, non −amine,
non−nitrite, and non −borate coolant with long −life hybrid
organic acid technology (Coolant with long −life hybrid
organic acid technology is a combination of low phosphates
and organic acids.)
Do not use plain water alone.
For checking the engine coolant, see page 413.
 Automatic transmission:
Fluid type − “Toyota Genuine ATF Type WS”
 Tire information:
See page 424 through 443 for detailed information.
 Tire inflation pressure:
Tire size: P275/60R18 111H
cold tires
kPa (kgf/cm
2 or bar, psi)
Normal driving Trailer towing
Front tires 200 (2.0, 29) 220 (2.2, 32) . . . . . .
Rear tires 220 (2.2, 32) 240 (2.4, 35) . . . . . .

QUICK REFERENCE
2
1. DRIVER’S SEAT
00X005c
Seat adjustmentSeat
position
Seat
cushion angle
Seat cushion height
Head restraint height
Seatback
angle
Lumbar support
Head restraint angle
2. STEERING WHEEL
TILT STEERING COLUMN
00X016f
To tilt the steering column up or down to the desired
angle, push the control switch in the required direction
and release the button when the steering column
reaches the desired angle.
TELESCOPIC STEERING COLUMN
00X015f
To move the steering column to the desired position,
push the control switch away from you or pull it toward
you until the steering column reaches the desired
position.

KEYS AND DOORS
19
SIDE DOORS
Locking with key
11X001b
 1Lock 2Unlock
Turn the key towards the front of the vehicle to lock and
towards the back to unlock.
All the side doors and back door lock and unlock
simultaneously with either front door. In the driver’s door lock,
turning the key once will unlock the driver’s door and twice in
succession will unlock all th e side doors and back door
simultaneously. In the passenger’s door lock, turning the key
once will unlock all the side doors and back door
simultaneously.*
NOTE: *The 2step unlocking function can be changed.
Ask your Lexus dealer for details. Together with the activation of
unlocking, the interior light
comes on for 15 seconds if the interior light switch is in “DOOR”
position. However, this function does not work when the
ignition key is in the “ON” position. For further information, see
“Interior lights” on page 69.

SWITCHES
34Twist the aut
omatic control adjuster in the “–” direction to
lower the sensitivity, and the “+” direction to boost the
sensitivity.
With the ignition switch turned off, if the windshield sensor is
touched by reason of cleaning the windshield or for any other
reason, either of the following operations may cause automatic
wiper activation.
 Turning the ignition switch on with the wiper lever in the
“AUTO” position.
 Turning the ignition switch on and move the wiper lever
down in the “AUTO” position.
Even with the wiper lever in the “AUTO” position, the system
will switch to intermittent operations if the system malfunctions.
When the system malfunctions, the time interval between
sweeps is shortened as the vehicle speed increases. When
the vehicle speed reaches more than about 20 km/h (12 mph)
with the interval adjuster in “+” position, the time interval
becomes the shortest 1.5 seconds.
The system will turn off if the windshield gets extremely hot (at
more than 90 C or 194F) or cold (at less than –30 C or
–22 F).
CAUTION
Be careful not to get your fingers caught between the
wipers and windshield.
When the wiper lever is in the “AUTO” position with the
ignition switch on, the wipers could operate
automatically in the following cases:
 If you touch the upper center of the windshield
adjacent to the sensor.
 If you wipe the upper center of the windshield
(adjacent to which the sensor is located) with a towel.
 If the windshield vibrates.
 If you touch the sensor.
If you stop the vehicle with the wiper switch in the “LO” position,
the wiper speed automatically changes from low speed to
intermittent operation speed.* This function does not work
when the interval adjuster is in the “+” position.
NOTE: *This feature can be deactivated. Ask your Lexus
dealer for details.

SWITCHES
35
To make the washer squirt, pull the lever toward you and
release it.
If the wiper lever is in the “OFF” position, the wipers will
automatically make 3 wipes and then a single wipe later to
sweep the windshield completely.* The interval between the
3 wipes and the last wipe will depend on the vehicle speed.
The last sweep does not happen if the vehicle speed exceeds
about 170 km/h (106 mph).
NOTE: *The last single wipe can be deactivated. Ask your
Lexus dealer for details.
The low washer fluid warning light in the instrument cluster
comes on when the fluid level in the tank becomes very low.
For information on adding washer fluid, see “Adding washer
fluid” on page 458.
In cold weather, warm the windshield with the defroster before
using the washer. This will help prevent icing, which could
block your vision.
The rear window and outside rear view mirror defogger
automatically turns on when you operate the wipers.
NOTICE
Do not operate the wipers if the windshield is dry. It may
scratch the glass.
When waxing your vehicle, make sure the washer nozzles do
not become blocked. If a nozzle becomes blocked, contact
your Lexus dealer to have the vehicle serviced.
NOTICE
If a nozzle becomes blocked, do not try to clear it with
a pin or other object. The nozzle will be damaged.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
49
Your vehicle may overheat during severe operating conditions,
such as:

Driving up a long hill on a hot day.
 Reducing speed or stopping after high speed driving.
 Idling for a long period with the air conditioning on in
stop−and−go traffic.
 Towing a trailer.
NOTICE
Do not remove the thermostat in the engine cooling
system as this may cause the engine to overheat. The
thermostat is designed to control the flow of coolant
to keep the temperature of the engine within the
specified operating range.
 Do not continue driving with an overheated engine.
See “If your vehicle overheats” on page 338.
ENGINE OIL PRESSURE GAUGE
13X623
 1
Normal driving 2Idling
The engine oil pressure gauge indicates engine oil
pressure when the ignition is on. Check it while driving to
make sure the needle is in the proper range.
If the engine oil pressure should stay below the normal range,
pull off the road to a safe place and stop the engine
immediately. Call a Lexus dealer or qualified repair shop for
assistance.
Engine oil pressure may not build up when the engine oil level
is too low. The engine oil pressure gauge is not designed to
indicate engine oil level, and the engine oil level must be
checked using the level dipstick.

OCCUPANT RESTRAINT SYSTEMS
103
If your steering wheel is adjustable, tilt it downward.
This points the airbag toward your chest instead of
your head and neck.
The seat should be adjusted as recommended by
NHTSA above, while still maintaining control of the foot
pedals, steering wheel, and your view of the instrument
panel controls.
Front passenger seat
CAUTION
 The SRS front passenger airbag also deploys with
considerable force, and can cause death or serious
injury especially if the front passenger is very close
to the airbag. The front passenger seat should be as
far from the airbag as possible with the seatback
adjusted, so the front passenger sits upright.
 Do not use seat accessory, such as a cushion or seat
cover, that covers the front seat, or do not modify or
replace the upholstery of the front seat. Such
accessories or changes may prevent the front
passenger airbag system from activating correctly,
disable the system or cause the front passenger
airbag to inflate accidentally, resulting in death or
serious injury.
Front seats
CAUTION
The SRS side airbags are installed in the driver and front
passenger seats. Observe the following precautions.
 Do not lean against the front door when the vehicle
is in use, since the side airbag inflates with
considerable speed and force. Otherwise, you may
be killed or severely injured.
 Do not use seat accessories which cover the area
where the side airbags inflate. Such accessories may
prevent the side airbags from activating correctly,
causing death or serious injury.
 Do not modify or replace the seats or upholstery of
the seats with side airbags. Such change may
prevent the side airbag system from activating
correctly, disable the system, or cause the side
airbags to inflate accidentally, resulting in death or
serious injury.

OCCUPANT RESTRAINT SYSTEMS
108
16X185b
Third seat
Lean forward and pull the lock release lever. Then lean
back to the desired angle and release the lever.
CAUTION
Avoid reclining the seatback any more than needed.
The seat belts provide maximum protection when the
passengers are sitting up straight and well back in the
seats. If you are reclined, the lap belt may slide past
your hips and apply restraint forces directly to the
abdomen or your neck may contact the shoulder belt.
In the event of a frontal collision, the more the seat is
reclined, the g reater the risk of death or personal injury.
Tumbling second seat for third seat entry
16X186b
For easy access to the third seat, tumble the second seat
in accordance with the following procedure.
Before tumbling the second seat, stow the second seat
buckles as shown in the illustration.
This prevents the buckles from falling out when you tumble the
second seat.
NOTICE
The seat belt buckles must be stowed before you tumble
the second seat.

OCCUPANT RESTRAINT SYSTEMS
11 0
Tumbling second seat
16X186b
Before tumbling the second seat, stow the second seat
buckles as shown in the illustration.
This prevents the buckles from falling out when you tumble the
second seat.
NOTICE
The seat belt buckles must be stowed before you tumble
the second seat.
16X646
1. Lower the head restraints to the lowest position, unlock
the seatback by pulling the lever on the side of the
seatback and fold it down.
16X188c
2. Pull the lever under the seat cushion or pull the strap on
the rear end of the seat cushion and swing the whole seat
forward.