high beam LEXUS LX570 2014 User Guide

2162-3. Operating the lights and wipers
LX570_OM_OM60L21U_(U) ■
If a warning message of the Automatic High Beam is displayed...
It may indicate a malfunction in the system. Contact your Lexus dealer. ■
Temporary lowering sensor sensitivity
The sensitivity of the sensor can be temporarily lowered.
To lower the sensitivity, push and hold on the inside rear view mirror for 15 to
20 seconds, and release. The indicator light on the inside rear view mirror will flash
to indicate that the sens itivity has been lowered.
When the “ENGINE START STOP” switch is turned off, the sensitivity will be
returned to its normal level. ■
Customization
The Automatic High Beam can be turned off.
(Customizable features  P. 9 0 6 )

2172-3. Operating the lights and wipers
2
When driving
LX570_OM_OM60L21U_(U) NOTICE■
Camera sensor
●
Do not touch the camera sensor. ●
Do not subject the inside rear view mirror or the camera sensor to a strong
impact. ●
Do not disassemble the camera sensor. ●
Do not spill liquid onto the inside rear view mirror or the camera sensor. ●
Do not apply window tinting or stickers to the camera sensor or the area of wind-
shield near the camera sensor. ●
Do not place items on the dashboard. There is a possibility that the camera sensor
will mistake items reflected in the windshield for streetlights, the headlights of
other vehicles, etc. ●
Do not install a parking tag or any othe r accessories near or around the inside
rear view mirror and the camera sensor. ●
Do not overload the vehicle. ●
Do not modify the vehicle. ●
Do not replace windshield with a non-genuine windshield.
Contact your Lexus dealer. Observe the following to ensure that the
Automatic High Beam functions correctly.

7904-3. Do-it-yourself maintenance
LX570_OM_OM60L21U_(U) 48 ECU-B1 5 A Smart access system with push-button
start, overhead module, yaw rate & G
sensor, tilt and telescopic steering,
meter, cool box, gateway ECU, steer-
ing sensor, VGRS
49 DOME1 10 A Illuminated entry system, power third
seat switch, power back door switch,
clock
50 HEAD LH 15 A Headlight high beam (left)
51 HEAD LL 15 A Headlight low beam (left)
52 INJ 10 A Injector, ignition system
53 MET 5 A Meter
54 IGN 10 A Circuit open, SRS airbag system,
gateway ECU, smart access system
with push-button start, ABS, VSC,
steering lock system, GBS
55 DRL 5 A Daytime running light
56 HEAD RH 15 A Headlight high beam (right)
57 HEAD RL 15 A Headlight low beam (right)
58 EFI NO.2 7. 5 A Air injection system, air flow meter
59 RR A/C NO.2 7. 5 A No circuit
60 DEF NO.2 5 A Outside rear view mirror defoggers
61 SPARE 5 A Spare fuse
62 SPARE 15 A Spare fuse
63 SPARE 30 A Spare fuseFuse Ampere Circuit

7994-3. Do-it-yourself maintenance
4
Maintenance and care
LX570_OM_OM60L21U_(U) Light bulbs You may replace the following bulbs yourself. The difficulty level of replace-
ment varies depending on the bulb. If necessary bulb replacement seems
difficult to perform, contact your Lexus dealer.
For more information about replacing other light bulbs, contact your Lexus
dealer.
■ Prepare a replacement light bulb
Check the wattage of the light bulb being replaced. (  P. 890)
■ Remove the engine compartment cover
 P. 74 8
■ Front bulb locations Headlight high beamFront turn signal light

8014-3. Do-it-yourself maintenance
4
Maintenance and care
LX570_OM_OM60L21U_(U) Replacing light bulbs
■ Headlight high beams
Turn the cover counterclockwise
and remove it.
Turn the bulb base counterclock-
wise.
Unplug the connector while pull-
ing the lock release.STEP 1
STEP 2
STEP 3

8064-3. Do-it-yourself maintenance
LX570_OM_OM60L21U_(U) ■ Lights other than the above
If any of the lights listed below ha s burnt out, have it replaced by your
Lexus dealer.
● Headlight low beams
● Front side marker lights
● Parking lights
● Daytime running lights
● Front fog lights
● Side turn signal lights
● High mounted stoplight
● Stop/tail lights
● Tail lights
● Rear side marker lights
● License plate lights
● Running board light
● Outer foot lights

8094-3. Do-it-yourself maintenance
4
Maintenance and care
LX570_OM_OM60L21U_(U) CAUTION■
Discharge headlights ●
Contact your Lexus dealer be fore replacing discharge he adlights (including light
bulbs). ●
Do not touch the high-intensity discharg e headlight’s high voltage socket when
the headlights are turned on.
An extremely high voltage of 30000 V will be discharged and could result in
serious injury or death by electric shock. ●
Do not attempt to take apart or repair the low beam discharge headlight bulbs,
connectors, power supply circuits, or related components.
Doing so could result in electric shock and serious injury or death.■
To prevent damage or fire
Make sure bulbs are fully seated and locked.

5
When trouble arises
8355-2. Steps to take in an emergency
LX570_OM_OM60L21U_(U) Indicates a malfunction in the VGRS
A buzzer also sounds.
Indicates a malfunction in the 4-wheel AHC system
A buzzer also sounds.
(If equipped) Indicates a malfunction in the automatic high beam
A buzzer also sounds.Wa r n i n g m e s s a g e Details

8906-1. Specifications
LX570_OM_OM60L21U_(U) Light bulbs
A: D4S high-intensity discharge
B: HB3 halogen bulbs
C: Wedge base bulbs
D: Single end bulbs
E: Double end bulbs Light bulbs Bulb No. W Ty p e
Exterior Headlights
Low beam
High beam 
9005 35
60 A
B
Front turn signal lights 74 4 4 N A 28 C
Rear turn signal lights  21 C
Back-up lights  16 C
Running board lights  3.8 C
Outer foot lights  5 C
Interior Front interior light  8 C
Rear interior lights
With rear personal lights
Without rear personal lights  8
8 C
E
Vanity lights  2 D
Door courtesy lights  5 C
Glove box light  1.2 C
Luggage compartment light  5 E

9116-2. Customization
6
Vehicle specifications
LX570_OM_OM60L21U_(U) Automatic
light control
system
(  P. 2 0 6 ,
211) Light sensor sensi-
tivity Standard -2 to 2 O — O
Daytime running
light system On Off
* 6
O — O
Ti m e e l a p s e d
before headlights
automatically turn
off after doors are
closed 30 seconds Off
O — O60 seconds
90 seconds
Automatic High
Beam system On Off — — O
Rear window
wiper and
washer
(  P. 2 2 6 ) Switching opera-
tion when the vehi-
cle is stationary On Off — — O
Drip prevention
function On Off — — O
Rear window wiper
operation linked
with washer On Off — — O
Linked operation
when the shift lever
in “R” position On Off — — O
Times of the linked
operation when the
shift lever in “R”
position Once Continuously — — OItem Function Default
setting Customized
setting