audio LEXUS NX300h 2015 Owner's Manual

2814-5. Using the driving support systems
4
Driving
NX300h_U_OM78007U ■
Distance display
Sensors that detect an obstacle w ill illuminate continuously or blink.
* 1
: The images may differ from that shown in the illustrations. (  P. 2 8 0 )
* 2
: Multi-information display
* 3
: Lexus Display Audio or navigation system screenSensor detection display, obstacle distance Display
* 1
Insert
display Approximate distance to obstacle
Front and rear
center sensor Front and rear
corner sensor
(continuous) (blinking slowly) Front center sensor:
3.3 ft. (100 cm) to
2.0 ft. (60 cm)
Rear center sensor:
4.9 ft. (150 cm) to
2.0 ft. (60 cm) 
(continuous) (blinking) 2.0 ft. (60 cm) to
1.5 ft. (45 cm) 2.0 ft. (60 cm) to
1.5 ft. (45 cm)
(continuous) (blinking rapidly) Front center sensor:
1.5 ft. (45 cm) to
1.0 ft. (30 cm)
Rear center sensor:
1.5 ft. (45 cm) to
1.2 ft. (35 cm) 1.5 ft. (45 cm) to
1.0 ft. (30 cm)
(blinking
* 2
or
continuous
* 3
) (continuous) Front center sensor:
Less than
1.0 ft. (30 cm)
Rear center sensor:
Less than
1.2 ft. (35 cm) Less than
1.0 ft. (30 cm)

2834-5. Using the driving support systems
4
Driving
NX300h_U_OM78007U You can change the buzzer sounds volu me and the screen operating conditions
when the power switch is in ON mode. 
Lexus Display Audio system
Press the “MENU” button on the Lexus Display Audio controller, and then
select “Setup” on the screen.
Select “Vehicle”, and th en select “LEXUS Park Assist” on the screen.
Select the desired item. 
Navigation system
Press the “MENU” button on the Remote Touch, and then select “Setup” on
the screen.
Select “Vehicle”, and th en select “LEXUS Park Assist” on the screen.
Select the desired item.
The buzzer sounds volume can be adjusted.
On or off can be selected for intuitive parking assist display.
Both the front or rear center sensors display and tone indication can be set.Setting up intuitive parking assist (v ehicles with a Lexus Display Audio
or navigation system) 1
2
3
1
2
3 
Lexus Display Audio screen 
Navigation system screen
1
2
3

2854-5. Using the driving support systems
4
Driving
NX300h_U_OM78007U ●
The shape of the obstacle may prevent a sensor from detecting it. Pay particular atten-
tion to the following obstacles:
• Wires, fences, ropes, etc.
• Cotton, snow and other materials that absorb sound waves
• Sharply-angled objects
•Low obstacles
• Tall obstacles with upper sections projecting outwards in the direction of your vehi-
cle ●
The following situations may occur during use.
• Depending on the shape of the obstacle and other factors, the detection distance
may shorten, or detect ion may be impossible.
• Obstacles may not be detected if they are too close to the sensor.
• There will be a short delay between obst acle detection and display. Even at slow
speeds, there is a possibility that the obstacle w ill come within the sensor’s detection
areas before the display is shown and the buzzer sounds.
• Thin posts or objects lower than the sensor may not be detected when approached,
even if they have been detected once.
• It might be difficult to hear beeps due to th e volume of audio system or air flow noise
of the air conditioning system.■
If “Clean Parking Assist Sensor” is di splayed on the multi-information display
A sensor may be dirty or covered with snow or ice. In such cases, if it is removed from the
sensor, the system should return to normal.
Also, due to the sensor being frozen at low temperatures, a malfunction display may
appear or an obstacle may not be detected. If the sensor thaws out, the system should
return to normal. ■
If “Parking Assist Malfunction” is di splayed on the multi-information display
Depending on the malfunction of the sensor, the device may not be working normally.
Have the vehicle inspected by your Lexus dealer. ■
Certification 
For vehicles sold in the U.S.A.
This device complies with Part 15 of the FC C Rules. Operation is subject to the following
two conditions; (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, incl uding interference that may cause undesired
operation. 
For vehicles sold in Canada
This ISM device complies with Canadian ICES-001.
Cet appareil ISM est conforme a la norme NMB-001 du Canada. ■
Customization
Settings (e.g. buzzer sounds volume) can be changed. (  P. 2 8 3 )

2894-5. Using the driving support systems
4
Driving
NX300h_U_OM78007U ●
Parking assist guide line display mode (  P. 2 9 2 )
The steering wheel return points
(parking assist guide lines) are
displayed. ●
Distance guide line display mode
Distance guide lines only are dis-
played.
When the shift lever is in any position other than R, the display mode can be
changed in the following procedure.
Press the “MENU” button on the Lexus Display Audio controller, and then
select “Setup” on the screen.
Select “Vehicle”, and then select “B ack Camera Guide Line Setting” on the
screen.
Select the desired display mode.
Estimated course line display
mode (  P. 2 9 0 )
Parking assist guide line display
mode (  P. 2 9 2 )
Distance guide line display mode
Distance guide lines only are dis-
played.Switching the display mode 1
2
3
1
2
3

3174-5. Using the driving support systems
4
Driving
NX300h_U_OM78007U ■
The BSM outside rear view mirror indicators visibility
When under strong sunlight, the BSM outside rear view mirror indicator may be difficult
to see. ■
Rear Cross Traffic Alert buzzer hearing
Rear Cross Traffic Alert function may be difficult to hear over loud noises such as high
audio volume. ■
When “Blind Spot Monitor Unavailable” is shown on the multi-information display
Water, snow mud, etc., may be built up in the vicinity of the sensor area of bumper.
(  P. 318) Removing the water, snow, mud, etc., from the vicinity of the sensor area
bumper should return it to normal. Also, the sensor may not function normally when used
in extremely hot or cold weather. ■
When “Blind Spot Monitor System Malfunct ion” is shown on the multi-information
display
There may be a sensor malfunction or voltag e abnormality. Have the vehicle inspected at
a Lexus dealer. ■
Certification for the Blind Spot Monitor system 
For vehicles sold in the U.S.A.
FCC ID: OAYSRR2A
This device complies with part 15 of the FC C Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compli-
ance could void the user’s authority to operate the equipment. 
For vehicles sold in Canada
Applicable law: Canada 310
This device complies with Industry Canada licence-exempt RSS st andard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Frequency bands: 24.05-24.25 GHz
Output power: less than 20 milliwatts

334
NX300h_U_OM78007U 5-1. Basic Operations
Lexus Display Audio
System ......................................... 336
Steering wheel audio
switches ...................................... 342
Mobile Assistant ........................343
USB/AUX ports ........................ 345
5-2. Setup
Setup menu.................................. 347
General settings ........................348
Voice settings............................... 351
Display settings .......................... 352
5-3. Using the audio system
Selecting the audio
source .......................................... 353
Optimal use of the audio
system ......................................... 354
Audio settings ............................. 355
Audio menu screen
operation ...................................358
5-4. Using the radio
Radio operation ............................361
5-5. Playing an audio CD and
MP3/WMA/AAC discs
CD player operation ................ 367

335
Lexus Display
Audio system
5
NX300h_U_OM78007U 5-6. Using an external device
Listening to an iPod ....................374
Using USB memory
device .......................................... 377
Using the AUX port .................. 381
5-7. Connecting Bluetooth ®

Steps for using Bluetooth ®

devices ........................................ 382
Registering a Bluetooth ®

device ......................................... 384
Selecting a Bluetooth ®

device ......................................... 385
Connecting a Bluetooth ®

audio player ............................. 386
Connecting a Bluetooth ®

phone...........................................387
Displaying a Bluetooth ®

device details........................... 388
Detailed Bluetooth ®

settings ....................................... 389
5-8. Bluetooth ®
Audio
Listening to Bluetooth ®

Audio........................................... 390 5-9. Bluetooth ®
Phone
Using a Bluetooth ®

Phone ........................................... 392
Making a call ............................... 394
Receiving a call .......................... 397
Speaking on the phone ...........398
Using a Bluetooth ®

phone message ...................... 400
Using the steering wheel
switches ...................................... 402
Bluetooth ®
phone
settings........................................ 403
5-10. Phonebook
Contact settings .........................405
Messaging setting .................... 408
5-11. Bluetooth ®
What to do if...
(Troubleshooting)....................409
Bluetooth ®
................................... 413
5-12. Other function
“Information” screen .................. 418
USB photo ................................... 420
Weather information................ 422
Voice command system ......... 423
LEXUS Enform Remote..........427

336 5-1. Basic Operations
NX300h_U_OM78007ULexus Display Audio system 
Disc slot
“TUNE•SCROLL” knob
Select a radio station band, track or file.
Except radio and A/V mode: Pause or resume playing a track or file.
Radio and A/V mode: Turn mute on/off.
Select preset radio stations, or access a desired track or file.
Display the media top screen.
Display the radio top screen.
Eject a disc.
“PWR•VOL” knob
Press to turn the audio system on/o ff, and turn to adjust the volume.
 : If equippedUse the following buttons to start listening to the audio system.
Lexus Display Audio operation buttons
1
2
3
4
5
6
7
8

3375-1. Basic Operations
5
Lexus Display Audio system
NX300h_U_OM78007U ■
“Menu” screen
To display the “Menu” screen, press the “MENU” button on the controller unit.
Button Function
“Radio” Display the radio top screen (  P. 3 6 1 )
“Media” Display the media top screen (  P. 367, 374, 377, 381, 386)
“Climate” Automatic air conditioning system (  P. 4 3 0 )
“Phone” Display the phone top screen (  P. 3 9 2 )
“Info” Display the “Information” screen (  P. 4 1 8 )
“Setup” Setup menu (  P. 3 4 7 )
“Display” Display settings (  P. 3 5 2 )

338 5-1. Basic Operations
NX300h_U_OM78007U By using the Lexus Display Audio controller, you can control the audio system,
hands-free system, etc.
Display the “Source” screen or
audio top screen (  P. 3 5 3 )
Display the “Menu” screen
(  P. 3 3 7 )
Back button
Display the previous screen
Turn or move the controller to select
a function and number.
Move the controller to display the left or right side of the screen.
Push the controller to enter the selected function and number.■
Using the Lexus Display Audio controller
Select: Turn or move the control-
ler.
Enter: Push the controller.Lexus Display Audio controller 1
2
3
4
1
2