clock LEXUS NX300h 2015 Owners Manual

TABLE OF CONTENTS
6
NX300h_U_OM78007U 6-4. Other interior features
Other interior features ............ 455
• Sun visors ................................ 455
• Vanity mirrors ........................ 455
• Clock ........................................ 456
• Power outlet (12 VDC)...... 456
• Power outlet (120 VAC) ....457
• Wireless charger.................. 458
• Armrest.................................... 465
• Assist grips ............................. 465
• Coat hooks ............................. 466
Garage door opener ................467
Compass ........................................473
Safety Connect............................ 477
7-1. Maintenance and care
Cleaning and protecting
the vehicle exterior ................ 484
Cleaning and protecting
the vehicle inte rior..................488
7-2. Maintenance
Maintenance
requirements ..............................491
General maintenance.............. 494
Emission inspection and
maintenance (I/M)
programs .....................................497 7-3. Do-it-yourself maintenance
Do-it-yourself service
precautions................................ 498
Hood ...............................................500
Positioning a floor jack.............. 501
Engine compartment ............... 502
12-volt battery ...............................512
Tires....................................................516
Tire inflation pressure ............... 525
Wheels ........................................... 528
Air conditio ning filter ............... 530
Electronic key battery.............. 532
Checking and replacing
fuses.............................................. 534
Light bulbs .................................... 538
8-1. Essential information
Emergency flashers .................. 556
If your vehicle has to
be stopped in an
emergency .................................5577
Maintenance and care 8
When trouble arises

352 5-2. Setup
NX300h_U_OM78007UDisplay settings Go to “Display”: “MENU” button  “Display”
Turn off screen.
Adjust screen quality.
Adjust screen quality of the rear
view monitor camera.
Change to day mode.
This setting turns the screen off. To turn it on, press any button such as the
“AUDIO” button or “MENU” button. If a screen off image has been set, the set image will be displayed.
When the headlights are turned on, the screen dims.
However, the screen can be switched to day mode by selecting “Day Mode”. The screen will stay in day mode when the headlights are turned on until “Day Mode”
is selected again.
Select “General” or “Camera” on the “Display” screen or select “Display” on
each audio menu screen. (  P. 3 5 8 )
Adjust the display as desired by turning the controller clockwise (+) or coun-
terclockwise (-). To select “Contrast”, “Brightness”, “Color” or “Tone”, move the controller to the left.
(“Color” and “Tone” are available when “Display” on the audio settings screen for
each audio source is selected.) ■
Changing the sample image (when “General” is selected)
Move the controller to the right and select the desired sample image.Settings are available for adjusting the contrast and brightness of the screen.
The display can also be turned off.
Screen for display settings 1
2
3
4
Screen off
Day mode
Adjusting the screen quality 1
2

429
6Interior features
NX300h_U_OM78007U 6-1. Using the air conditioning
system and defogger
Automatic air conditioning
system ......................................... 430
Heated steering wheel/
seat heaters/
seat ventilators......................... 440
6-2. Using the interior lights
Interior lights list..........................443
• Front interior light ................444
• Personal lights........................444
• Rear interior light ................. 445 6-3. Using the storage features
List of storage features ............ 446
• Glove box ............................... 447
• Console box........................... 447
•Cup holders/
bottle holders.........................448
• Sunglass holder .................... 449
Luggage compartment
features........................................ 450
6-4. Other interior features
Other interior features ............ 455
• Sun visors ................................ 455
• Vanity mirrors ........................ 455
• Clock ........................................ 456
• Power outlet (12 VDC)...... 456
• Power outlet (120 VAC) ... 457
• Wireless charger .................. 458
• Armrest .................................... 465
• Assist grips.............................. 465
• Coat hooks ............................. 466
Garage door opener................ 467
Compass ........................................473
Safety Connect ............................477

456 6-4. Other interior features
NX300h_U_OM78007U The clock can be adjusted by pressing the buttons.
Pressing and holding will move the
clock hands backward.
Pressing and holding will move the
clock hands forward.
Please use a power supply for electronic goods that use less than 12 VDC /10 A
(power consumption of 120 W).
When using electronic goods, make sure that the power consumption of all the
connected power outlets is less than 120 W.
●
The power outlet can be used when the power switch is in ACCESSORY or ON mode.Clock 1
2
Power outlet (12 VDC) 
Inside the console box 
In the luggage compartment
Open the lid. Open the lid. ●
The notch in console box allows power cables
to be passed through even when the console
box is closed.

5057-3. Do-it-yourself maintenance
7
Maintenance and care
NX300h_U_OM78007U ■
Adding engine oil
If the oil level is below or near the
low level mark, add engine oil of the
same type as that already in the
engine.
Make sure to check the oil type and prepare the items needed before adding
oil.
Remove the oil filler cap by turning it coun terclockwise.
Add engine oil slowly, checking the dipstick.
Install the oil filler cap by turning it clockwise. ■
Engine oil consumption
A certain amount of engine oil will be consum ed while driving. In th e following situations,
oil consumption may increase, and engine o il may need to be refilled in between oil
maintenance intervals. ●
When the engine is new, for example directly after purchasing the vehicle or after
replacing the engine ●
If low quality oil or oil of an inappropriate viscosity is used●
When driving at high engine speeds or with a heavy load, when towing, or when driving
while accelerating or de celerating frequently●
When leaving the engi ne idling for a long time, or when driving frequently through
heavy trafficEngine oil selection  P. 6 1 2
Oil quantity (Low  Full) 1.6 qt. (1.5 L, 1.3 Imp.qt.)
Items Clean funnel1
2
3

5417-3. Do-it-yourself maintenance
7
Maintenance and care
NX300h_U_OM78007U ■
Headlight high beams (halogen bulbs) 
For the right side only:
Remove the bolt, and move the
washer fluid supply opening.
When it is difficult to work,
remove the washer fluid supply
opening.
Turn the cover counterclockwise
and remove it.
Turn the bulb base counterclock-
wise.Replacing light bulbs 1
2
3

5437-3. Do-it-yourself maintenance
7
Maintenance and care
NX300h_U_OM78007U Install the bulb base. Align the 3 tabs on the light bulb with
the mounting, and insert. Turn it
clockwise to set.
Confirm the installation of the
bulb base. Shake the bulb base gently to check
that it is not loose, turn the headlight
high beams on once and visually
confirm that no light is leaking
through the mounting.
Install the cover and turn it clock-
wise. Align the of the cover to the
positioning mark of the lamp body
and insert and turn it.
There is the positioning mark on
the outer side of the light unit. 7
8
9

5457-3. Do-it-yourself maintenance
7
Maintenance and care
NX300h_U_OM78007U ■
Front side marker light (bulb type)
Turn the bulb base counterclock-
wise.
Remove the light bulb.
When installing, reverse the steps listed.■
Front turn signal lights (bulb type)
Open the hood and remove the cover for engine compartment cover.
(  P. 500, 503)
Remove the cover.
Push the center of the clip.
Remove the clip and cover.
Turn the bulb base counterclock-
wise. 1
2
3
1
2
1
2
3

546 7-3. Do-it-yourself maintenance
NX300h_U_OM78007U Remove the light bulb.
Replace the light bulb.
Turn clockwise and set the bulb
base.
Attach the clip to the cover.
Push up on the center of the
clip.
Attach the clip. 4
5
6
7
1
2

548 7-3. Do-it-yourself maintenance
NX300h_U_OM78007U Remove the light unit.
Attach 2 long pieces of the
masking tape and fold the
excess portion over in half.
Hold the section folded in half,
pull toward the rear of the lens
and remove.
Turn the bulb base counterclock-
wise.
Remove the light bulb. 4
1
2
5
6