LEXUS RC300 2020 Owners Manual
RC300 2020
LEXUS
LEXUS
https://www.carmanualsonline.info/img/36/58950/w960_58950-0.png
LEXUS RC300 2020 Owners Manual
Trending: dimensions, CD player, change wheel, fuse, tires, winter tires, mirror
Page 351 of 390

3498-2. Customization
8
Vehicle specifications
■Illumination (P.217)
■Seat belt reminder ( P.288)
■Vehicle customization●When the smart acc ess system with
push-button start is off, the entry unlock
FunctionDefault settingCustomized setting
Time elapsed before the inte-
rior lights turn off15 seconds
Off
O—O7.5 seconds
30 seconds
Operation after the engine
switch is turned offOnOff——O
Operation when the doors
are unlockedOnOff——O
Operation when you
approach the vehicle with the
electronic key on your person
OnOff——O
Remote Touch pad lightOnOff——O
Time elapsed before the outer
foot lights turn off15 seconds
Off
O—O7.5 seconds
30 seconds
Operation of the outer foot
lights when you approach the
vehicle with the electronic
key on your person
OnOff——O
Operation of the outer foot
lights when the doors are
unlocked with the power
door lock switch
OnOff——O
Operation of the outer foot
lights when a door is openedOnOff——O
Fading out of the outer foot
lights when they turn offLongShort——O
ABC
FunctionDefault settingCustomized setting
Vehicle speed linked seat belt
reminder buzzerOnOff——O
ABC
Page 352 of 390
3508-2. Customization
function cannot be customized.
●When the doors remain closed after
unlocking the doors and the timer acti-
vated automatic door lock function acti-
vates, signals will be generated in
accordance with the operation buzzer
volume and operational signal (Emer-
gency flashers) function settings.
●Some settings can be changed using a
switch or the Center Display. If a setting is
changed using a switch, the changed set-
ting will not be reflected on the Center
Display screen until the engine switch is
turned off and then to IGNITION ON
mode.
Page 353 of 390
3518-3. Items to initialize
8
Vehicle specifications
8-3.Items to initialize
Items to initialize
The following items must be initialized for normal system operation after such
cases as the battery being reconnected, or maintenance being performed on
the vehicle:
List of items to initialize
ItemWhen to initializeReference
Message indicating
maintenance is
required (U.S.A. only)
After the maintenance is performedP.240
Engine oil mainte-
nance dataAfter changing the engine oilP.252
Tire pressure warning
system
• When rotating the tires
• When changing the tire inflation pres- sure by changing traveling speed or
load weight, etc.
P.262
Page 354 of 390
3528-4. Certifications
8-4.Certifications
Certifications
Immobilizer system
Smart access system with push-button start
Page 355 of 390
3538-4. Certifications
8
Vehicle specifications
Page 356 of 390
3548-4. Certifications
Millimeter wave radar sensor
Page 357 of 390
3558-4. Certifications
8
Vehicle specifications
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions; (1) This
device may not cause harmful interfer-
ence, and (2) this device must accept
any interference received, including
interference that may cause undesired
operation.
This ISM device complies with Cana-
dian ICES-001.Cet appareil ISM est conforme a la
norme NMB-001 du Canada.
Intuitive parking assist sensor
Page 358 of 390
3568-4. Certifications
Blind Spot Monitor
Page 359 of 390
3578-4. Certifications
8
Vehicle specifications
Garage door opener
Page 360 of 390
3588-4. Certifications
LEXUS Enform
Trending: MPG, flat tire, service, alarm, steering wheel adjustment, fuel cap release, wiring