change time LEXUS RC300 2023 Owners Manual

12
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
When Driving
1Right turn
2Lane change to the right (move the
lever partway and release it)
The right hand signals will flash 3 times.
3Lane change to the left (move the lever
partway and release it)
The left hand signals will flash 3 times.
4Left turn
If the turn signals do not stop flashing after
turning left or right, or if you want to stop
them flashing, operate the lever in the
opposite direction to either position
2 or 3.
If you move the lever to either position
1 or
4, the selected turn signals will flash.
Turn Signal Lever
The lever will return to its original position immediately after operation.

14
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
■Menu icons
Select an item/change pages
Press: Enter/Set
Press and hold: Reset
Return to the previous screen
Pressing and holding the switch will
display the first screen of the selected
menu icon.
 Except F SPORT models
Press: Display the top screen
Press and hold: Register current screen as the top screen
Call sending/receiving and history display
Linked with the hands-free system, sending or receiving call is displayed. For details
regarding the hands-free system, refer to “NAVIGATION AND MULTIMEDIA SYS-
TEM OWNER’S MANUAL”.
 F SPORT models
Move the main meter
Call sending/receiving and history display
Linked with the hands-free system, sending or receiving call is displayed. For details
regarding the hands-free system, refer to “NAVIGATION AND MULTIMEDIA SYS-
TEM OWNER’S MANUAL”.
Drive information
Navigation system-linked display (if equipped)
Audio system-linked display
Driving assist system information
Warning message display
Settings display
If a problem is detected in any of the vehicl e’s systems, a warning message is shown on the
multi-information display.
Changing the meter display
A
B
C
D
E
D
E

22
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
• Current wiper operation: AUTO mode (Continuously)
*1: After temporary operation, the mode will return to AUTO mode.
*2: AUTO mode will be canceled.When AUTO mode is selected, the sensor
sensitivity can be adjusted by turning the
switch ring.
6Increases the sensitivity
7Decreases the sensitivity
8 Washer/wiper dual operation
Pulling the lever operates the wipers
and washer.
The wipers will automatically operate a
couple of times after the washer
squirts.
Vehicles with headlight cleaners:
When the engine switch is in IGNI-
TION ON mode and the headlights
are on, if the lever is pulled, the head-
light cleaners will operate once. After
this, the headlight cl eaners will operate
every 5th time the lever is pulled.
Wiper lever operationWiper operation
or Off
No change
or Low speed operation*2
or High speed operation*2

31
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Select the desired point on the map screen.
Move the desired point on the center of the
map screen.
Cursor mark
Distance from the current position to
the cursor mark
Select to register as a memory point
Select to set as a destination
Press the “MAP” button on the Remote To uch to return to the current position.
While route guidance is operating, you can change the route using the following method.
1Select on the map screen.
2Select the desired item to be set.
Select to display the overview of the
entire route
Select to reorder destinations
Select to change route type
Select to set route preferences
Select to set detours
Select to start from adjacent road
3Check that the route overview is displayed.
Screen scroll operation (Vehicles with a 10.3-inch display)
A
B
C
D
Editing route (Vehicles with a 10.3-inch display)
A
B
C
D
E
F
Some functions are unavailable while the vehicle is in motion. Refer to the “NAVIGATION
AND MULTIMEDIA SYSTEM OWNER’S MANUAL”.

41
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Follow the procedure below to display the audio control screen.
 Using the audio control switch
Press the “RADIO” or “MEDIA” button.
 Using the Remote Touch
Press the “MENU” button on the Re mote Touch, then select “Audio”.
Please refer to P.27 for the Remote Touch operation.
 Using the audio control switch
1Press the “RADIO” or “MEDIA” but-
ton.
“RADIO” button: Press to change
radio modes.
“MEDIA” button: Press to change
media modes.
●Each time the “RADIO” or
“MEDIA” button is pressed, the
audio source changes.
 From the audio source selection screen
1Display the audio control screen.
2Select “Source” on the sub menu.
3Select the desired source.
Audio System
Audio control screen
Selecting an audio source

48
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
■Adjusting the temperature setting
To adjust the temperature setting, touch and
slide your finger up or down on the sensor.
The temperature setting can also be
adjusted by touching on the sensor.
When the temperature setting is changed, a
buzzer sounds.
If is not pressed, the system will
blow ambient temperature air or heated air.
■Fan speed setting
Press to increase the fan speed.
Press to decrease the fan speed.
■Change the airflow mode
To change the airflow, press .
The air outlets used are switched each time the button is pressed.Display the air conditioning control
screen
Display the option control screen
Adjust the left-hand side temperature
setting
Adjust the fan speed setting
Select the air flow mode
Adjust the right-hand side temperature setting
Function on/off indicators
Display the sub function menu
Air conditioning control screen
A
B
C
D
E
F
G
H

51
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Each time the switch is pressed, the intensity of the seat heater changes and the level indica-
tor lights (amber) light as follows:
Hi (3 segments lit) 
Mid (2 segments lit) Lo (1 segment lit) Off
Each time the switch is pressed, the inten-
sity of the seat ventilator changes and the
level indicator lights (g reen) light as fol-
lows:
Hi (3 segments lit) 
Mid (2 segments lit)

Lo (1 segment lit) Off
Seat Heaters (if equipped)/
Seat Ventilators (if equipped)
Seat heaters
A
Vehicles without seat ventilators Vehicles with seat ventilators
Seat ventilators
A
■Seat heater timer control
To enable seat heater timer control, press and hold the driver and front passenger seat
heater switches at the same ti me when the vehicle is stopped until a buzzer sounds once. If
a seat heater is turned on whil e seat heater timer control is en abled, the intensity of the seat
heater will automati cally change from Hi MidLo.
The timing of the change in seat heater intensity differs depending on the temperature
inside the cabin, etc. when th e seat heater is operating.
To disable seat heater timer control, press and hold the driver and front passenger seat
heater switches at the same ti me until a buzzer sounds twice.

68
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
For SiriusXM Services requiring a subscription (such as SiriusXM Satellite Radio), the fol-
lowing paragraph shall be included.
Required SiriusXM Radio monthly subscriptions sold separately after trial period. Subscrip-
tion fee is consumer only. All fees and programming subject to change. Subscriptions are sub-
ject to the Customer Agreemen t available at www.siriusxm.com
(U.S.A.) or www.siriusxm.ca
(Canada) XM service only available in the 48 contiguous United States and 10 Canadian
provinces. © 2011 Sirius XM Radio Inc. Sirius , XM and all related marks and logos are trade-
marks of Sirius XM Radio Inc. All other mark s, channel names and logos are the property of
their respective owners.
For more information, program schedules, and to subscribe or extend subscription after
complimentary trial period; more information is available at:
 U.S.A. Customers:
Visit www.siriusxm.com
or call 1-877-447-0011
 Canadian Customers:
Visit www.siriusxm.ca
or call 1-877-438-9677
SiriusXM Satellite Radio
A SiriusXM Satellite Radio is a tuner designed exclusively to receive broadcasts provided
under a separate subscription.
For details, refer to the “NAVIGATION AND MULTIMEDIA SYSTEM OWNER’S
MANUAL”.
Subscription