high LEXUS RC350 2023 Owners Manual

1
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Pictorial Index ............................................................................................................................. 3
Floor Mat Installation Floor Mat Installation......................................................................................................... ..............11
When Driving Turn Signal Lever .............................................................................................................. .............. 12
Multi-information Display...................................................................................................... ...... 13
Headlights ..................................................................................................................... ..................... 15
AHB (Automatic High Beam)................................................................................................... 16
Windshield Wipers and Washer.............................................................................................. 18
Intuitive Parking Assist . ............................................ ................................................ ................... 23
BSM (Blind Spot Monitor) ....................................................................................................... .. 24
Tire Pressure Warning System ................................................................................................25
ASC (Active Sound Control) ................................................................................................... 26
Contents
The Quick Guide is not intended as a substitute for yourOWNER’S MANUAL. We strongly encourage you to review
the OWNER’S MANUAL and supplementary manuals so you
will have a better understandin g of your vehicle’s capabilities
and limitations.

5
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
■Switches
BSM (Blind Spot Monitor) main switch ............................................................. P.24
Windshield wiper de-icer switch
*1, 2
Odometer/trip meter/trip meter reset button*1
Instrument panel light control switches*1
ASC switch*2............................................................................................................ P.26
Intuitive parking assist switch
*2.......................................................................... P.23
Automatic High Beam switch ................................................................................ P.16
*1: Refer to the “OWNER’S MANUAL”.
*2:If equipped
A
B
C
D
E
F
G

15
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
1 The side marker, parking, tail,
license plate, inst rument panel lights,
and daytime running lights turn on.
2 The headlights and all lights listed
above (except daytime running lights)
turn on.
3 The headlights, daytime running
lights and all the lights listed above turn
on and off automatically. (When the
engine switch is in IGNITION ON
mode.)
4 (U.S.A.) Off
U.S.A.
Canada
1With the headlights on, push the lever
away from you to turn on the high
beams.
Pull the lever toward you to the center
position to turn the high beams off.
2Pull the lever toward you and release it
to flash the high beams once.
You can flash the high beams with the
headlights on or off.
Headlights
A
B
Turning on the high beam headlights

16
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
1Press the Automatic High Beam
switch.
2Turn the headlight switch to the or position.
The Automatic High Beam indicator
will come on when the system is oper-
ating.
AHB (Automatic High Beam)
The Automatic High Beam uses a camera sensor located behind the upper portion of the
windshield to assess the brightness of the lights of vehicles ahead, streetlights, etc., and
automatically turns the high beams on or off as necessary.
Activating the Automatic High Beam

17
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
■Switching to the high beams
Push the lever away from you.
The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Pull the lever to its original position to acti-
vate the Automatic High Beam system
again.
■Switching to the low beams
Press the Automatic High Beam switch.
The Automatic High Beam indicator will
turn off.
Press the switch to activate the Automatic
High Beam system again.
■Temporarily switching to the low beams
Pull the lever toward you and then return it
to its original position.
The high beams are on while the lever is
pulled toward you, however, after the lever
is returned to its orig inal position, the low
beams remain on for a certain amount of
time. Afterwards, the Automatic High
Beam will be activated again.
Turning the high beams on/off manually

18
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Operating the lever operates the wipers or washer as follows. The lever will return
to its original position after operation.
 Intermittent windshield wipe rs with interval adjuster
1 (U.S.A.) or (Canada)
Move the lever up by 2 levels
2 Move the lever up by 1 level
3 (U.S.A.) or (Canada)
Move the lever down by 1 level
4 (U.S.A.) or (Canada)
Move the lever down by 2 levels
Depending on the operating state of the wipers when the wiper lever is operated, the wipers
will operate as follows.
• Current wiper operation: Off
Windshield Wipe rs and Washer
Wiper lever operationWiper operation
or Temporary operation
Temporary operation
or Intermittent operation
or High speed operation

19
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
• Current wiper operation: Intermittent operation
• Current wiper operatio n: Low speed operation
• Current wiper operation: High speed operation
Wiper lever operationWiper operation
or Off
Off
or Low speed operation
or High speed operation
Wiper lever operationWiper operation
or Off
Intermittent operation
or High speed operation
or High speed operation
Wiper lever operationWiper operation
or Off
Low speed operation
or No change
or No change

21
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Depending on the operating state of the wipers when the wiper lever is operated, the wipers
will operate as follows.
• Current wiper operation: Off
• Current wiper operation: Low speed operation
• Current wiper operation: High speed operation
• Current wiper operation: AUTO mode (Intermittent operation)
Wiper lever operationWiper operation
or Temporary operation
Temporary operation
or Low speed operation
or High speed operation
Wiper lever operationWiper operation
or Off
Off
or High speed operation
or High speed operation
Wiper lever operationWiper operation
or Off
Low speed operation
or No change
or No change
Wiper lever operationWiper operation
or Off
Temporary operation*1
or Low speed operation*2
or High speed operation*2

22
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
• Current wiper operation: AUTO mode (Continuously)
*1: After temporary operation, the mode will return to AUTO mode.
*2: AUTO mode will be canceled.When AUTO mode is selected, the sensor
sensitivity can be adjusted by turning the
switch ring.
6Increases the sensitivity
7Decreases the sensitivity
8 Washer/wiper dual operation
Pulling the lever operates the wipers
and washer.
The wipers will automatically operate a
couple of times after the washer
squirts.
Vehicles with headlight cleaners:
When the engine switch is in IGNI-
TION ON mode and the headlights
are on, if the lever is pulled, the head-
light cleaners will operate once. After
this, the headlight cl eaners will operate
every 5th time the lever is pulled.
Wiper lever operationWiper operation
or Off
No change
or Low speed operation*2
or High speed operation*2

70
What to do if...
RC350 AWD_RC350_RC300 AWD_RC300_QG_(U)
Follow the correction procedures.
Inappropriate pedal
operation warning lightLow fuel level warning light
(flashes)
(U.S.A.)Parking brake
warning light
Driver’s and front passenger’s
seat belt reminder light
(flashes)
(Canada)Rear passenger’s seat belt
reminder lights
(Orange)
LTA indicatorMaster warning light
(flashes or
illuminates)PCS warning light
(Illuminates without
blinking)
Tire pressure warning light*1
Open door wa rning light
Stop and check.
High coolant temperature
warning light
For further information, refe r to the “OWNER’S MANUAL”.