door lock LEXUS RX 2023 User Guide

93
RX500h/RX350h_QG_U
■HomeLink® programming procedure
The programming procedures can also be found at the following URL.
Website: www.homelink.com/lexus
For support, contact customer support at the following.
Help Line: 1-800-355-3515
The HomeLink
® wireless control system in your vehicle has 3 buttons which can be pro-
grammed to operate 3 different devices. Refe r to the programming methods on the follow-
ing pages to determine the method wh ich is appropriate for the device.
 Vehicles with auto anti-glare inside rear view mirror
HomeLink
® indicator light
Garage door operation indicators
HomeLink
® icon
Illuminates while HomeLink
® is oper-
ating.
Buttons
Garage Door Opener
The garage door opener can be programmed using the HomeLink® to operate garage
doors, gates, entry doors, door locks, home lighting systems, security systems, and other
devices.
System components
A
B
C
D

104
What to do if...
RX500h/RX350h_QG_U
Use the mechanical key in order to perform the following operations:
1Insert a plastic card, etc. into the gap in
the door handle to pry up the cover.
To avoid damage, do not apply exces-
sive force to the cover.
2Remove the cover by pressing it on the
rear.
3Use the mechanical key in order to
perform the following operations:
1Unlocks all the doors
Turning the key rearward unlo cks the driver’s door. Turning the key again unlocks the
other doors.
2Locks all the doors
If the electronic key does not operate properly
Locking and unlocking the doors

108
What to do if...
RX500h/RX350h_QG_U
■Enabling outside manual release handle operation using the mechanical key
Operation of a manual release handle can be enabled by unlocking a door with the
mechanical key.
1Insert a plastic card, etc. into the gap in
the door handle to pry up the cover.
To avoid damage, do not apply exces-
sive force to the cover.
2Remove the cover by pressing it on the
rear.
3Using the mechanical key, turn the lock
cylinder to the unlock side to enable
the manual release handle operation.
The mechanical key can only be
inserted in one direction, as the key
only has a groove on one side.
If the key cannot be inserted in a lock
cylinder, turn it over and re-attempt to
insert it.