start stop button LEXUS RX270 2014 User Guide

236
2-4. Using other driving systems
RX350/270_EE
When the set speed is shown in “MPH”
By approximately 8 km/h (5 mph) each time the lever is operated
When the set speed is shown in “km/h”
By approximately 5 km/h (3.1 mph) each time the lever is operated
In the constant speed control mode (→P. 234), the set speed will be
increased or decreased as follows:
Fine adjustment: By approximately 1.6 km/h (1 mph) each time the lever is
operated
Large adjustment: The set speed can be increased or decreased continu-
ally until the lever is released.
■Changing the vehicle-to-vehicle distance
Pressing the button changes the
vehicle-to-vehicle distance as
follows:
Long
Medium
Short
The vehicle-to-vehicle distance
is set automatically to long
mode when the “ENGINE
START STOP” switch is turned
to IGNITION ON mode.
If a vehicle is running ahead of
you, the preceding vehicle mark
will also be displayed.
Preceding vehicle mark
RX350_270_EE_48D77E.book 236 ページ ２０１４年１月２４日　金曜日　午前１０時４分

240
2-4. Using other driving systems
RX350/270_EE
Selecting conventional constant speed control mode
Constant speed control mode differs from vehicle-to-vehicle distance
control mode. When constant speed control mode is selected, your vehi-
cle will maintain a set speed regardless of whether or not there are other
vehicles in the lane ahead.
Press the “ON-OFF” button to
activate the cruise control.
Press the button again to deacti-
vate the cruise control.
Switch to constant speed con-
trol mode.
(Push the lever forward and
hold for approximately one sec-
ond.)
Constant speed control mode indi-
cator will come on.
When in constant speed control
mode, to return to vehicle-to-vehi-
cle distance control mode, push
the lever forward again and hold
for approximately 1 second.
After the desired speed has been
set, it is not possible to return to
vehicle-to-vehicle distance control
mode.
If the “ENGINE START STOP”
switch is turned off and then turned
to IGNITION ON mode again, the
vehicle will automatically return to
vehicle-to-vehicle distance control
mode.
RX350_270_EE_48D77E.book 240 ページ ２０１４年１月２４日　金曜日　午前１０時４分

264
2-4. Using other driving systems
RX350/270_EE
■The rear view monitor system can be operated when
The shift lever is in R, the “ENGINE START STOP” switch is in IGNITION ON
mode.
■Changing display modes
The rear view monitor display mode can be changed while the screen is on.
●To temporarily disable the rear view monitor system
●To constantly disable the rear view monitor system
●To re-enable the rear view monitor system
Press the “AUTO” button. The indicator will turn green.Press the “AUTO” button.
The indicator will turn amber.
The system will be re-enabled once the
“ENGINE START STOP” switch is turned
off and then turned to IGNITION ON
mode.
Press and hold the “AUTO” button for 12 to
15 seconds.
The screen will turn off and on after 6 sec-
onds. Keep pressing the button until the
screen turns back off. The indicator will
flash amber.
The system will not automatically turn on
again after the “ENGINE START STOP”
switch is off and then turned to IGNITION
ON mode.
RX350_270_EE_48D77E.book 264 ページ ２０１４年１月２４日　金曜日　午前１０時４分

319
3-1. Using the air conditioning system and defogger
3
Interior features
RX350/270_EE
■Air conditioning system settings
●When the “ENGINE START STOP” switch is turned on, the air conditioning
system settings will be set to those that were in use the last time the “ENGINE
START STOP” switch was turned off.
●Air conditioning system settings are memorized individually on each electronic
key, so the settings reproduced will be specific to the key that is used.
●This feature is customizable at any authorized Lexus dealer or repairer, or
another duly qualified and equipped professional.
■Using automatic mode
Fan speed is adjusted automatically according to the temperature setting and ambi-
ent conditions. As a result, the following may occur:
Immediately after the button is pressed, the fan may stop for a while until warm or
cool air is ready to flow.
■Using the system in recirculated air mode
The windows will fog up more easily if recirculated air mode is used for an extended
period.
■Switching between outside air and recirculated air modes
Recirculated air mode or outside air mode may be automatically switched in accor-
dance with the temperature setting and the inside temperature.
■Window defogger feature
Recirculated air mode may automatically switch to outside air mode in situations
where the windows need to be defogged.
■When outside air temperature is below 0°C (32°F)
The cooling and dehumidification function may not operate even when is
pressed.
■When the indicator light on goes off
Press to turn on the cooling and dehumidification function again. There may
be a problem in the air conditioning system if the indicator light goes off again
shortly after the button is pressed. Have it inspected by any authorized Lexus
dealer or repairer, or another duly qualified and equipped professional.
RX350_270_EE_48D77E.book 319 ページ ２０１４年１月２４日　金曜日　午前１０時４分

432
3-5. Other interior features
RX350/270_EE
Clock
■The clock is displayed when
The clock is displayed when the “ENGINE START STOP” switch is in ACCES-
SORY or IGNITION ON mode.
■When the battery is disconnected
The time display will automatically be set to 1:00.
The clock can be adjusted by pressing the buttons.
Without a navigation system
Adjusts the hours
Adjusts the minutes
With a navigation system
Refer to the “Navigation System Owner’s Manual”.
RX350_270_EE_48D77E.book 432 ページ ２０１４年１月２４日　金曜日　午前１０時４分

5
589
5-2. Steps to take in an emergency
When trouble arises
RX350/270_EE
If the shift lever cannot be shifted from P
If the shift lever cannot be shifted with your foot on the brake pedal, there
may be a problem with the shift lock system (a system to prevent accidental
operation of the shift lever). Have the vehicle inspected by any authorized
Lexus dealer or repairer, or another duly qualified and equipped profes-
sional immediately.
The following steps may be used as an emergency measure to ensure that
the shift lever can be shifted:
Set the parking brake.
Turn the “ENGINE START STOP” switch to ACCESSORY
mode.
Depress the brake pedal.
Press the shift lock override but-
ton.
The shift lever can be shifted
while the button is pressed.
STEP1
STEP2
STEP3
STEP4
RX350_270_EE_48D77E.book 589 ページ ２０１４年１月２４日　金曜日　午前１０時４分