air LEXUS RX330 2006 Owners Manual

ELECTRICAL COMPONENTS
597
No.FUSEAMPERECIRCUIT
7 ABS NO. 130
Anti−lock brake system, vehicle
stability control system, traction
control system, brake assist
system
8 RR DEF40Rear window defogger
9 HEATER50Air conditioning system, rear
window defogger
10 DRL7.5Daytime running light system
11 HLP L
LW R15Left− hand headlight (low beam)
12 HLP L
UPR15Left− hand headlight (high beam)
13 HLP R
UPR15Right− hand headlight (high
beam)
14 PWR
OUTLET
NO. 220Power outlet
15 TOWING30Trailer lights
16 ABS NO. 250
Anti− lock brake system, vehicle
stability control system, traction
control system, brake assist
system
No.FUSEAMPERECIRCUIT
17 RDI FAN50Electric cooling fan
18 HAZ15Turn signal lights
19 CRT7.5Audio system
20 ALTS7.5Charging system
21 ETCS10Multiport fuel injection
system/sequential multiport fuel
injection system
22 HORN10Horns
23 MAIN40
Daytime running light system,
left− hand headlight, right− hand
headlight, all components in
“H− LP R LWR”, “H −LP R UPR”,
“H− LP L UPR”, “H− LP L LWR”
and “DRL” fuses
24 AM230Starting system, all components
in “GAUGE NO. 2”, “IGN” and
“INJ” fuses
25 RADIO
NO. 115Audio system, navigation system

ELECTRICAL COMPONENTS
598
No.FUSEAMPERECIRCUIT
26 ECUB7.5
Power window, multiplex
communication system, gauge
and meters, instrument cluster
lights, instrument panel lights, air
conditioning system, garage
door opener, illuminated entry
system, wireless remote control
system, power back door, driving
position memory system,
navigation system display, moon
roof, tilt and telescopic steering,
power seats, outside rear view
mirror, windshield wipers
27 DOME7.5
Gauge and meters, personal
lights, vanity lights, door
courtesy lights, inside door
handle lights, ignition switch
light, foot lights, scuff plate lights,
luggage compartment light,
interior light
28 TEL7.5No circuit
29 AMP30Audio system
30 DOORNO. 125Multiplex communication system
No.FUSEAMPERECIRCUIT
31 A/F25Multiport fuel injection
system/sequential multiport fuel
injection system
32 EFI NO. 125
Multiport fuel injection
system/sequential multiport fuel
injection system and all
components in “EFI NO. 2” fuse
33 HLP R LW R15Right− hand headlight (low beam)
34 EFI NO. 210Multiport fuel injection
system/sequential multiport fuel
injection system
35 RR DOOR
RH20Rear right side power window
36 RR DOOR LH20Rear left side power window
37 FUELOPN7.5Fuel filler door opener
38 FR FOG15Front fog lights
39 OBD7.5On− board diagnosis system
40 FR DEF25Windshield wiper de −icer and all
components in “MIR HTR” fuse

ELECTRICAL COMPONENTS
599
No.FUSEAMPERECIRCUIT
41 STOP10
Tail lights, high mounted
stoplight, rear light failure
warning light, anti−lock brake
system, vehicle stability control
system, traction control system,
brake assist system,
electronically modulated air
suspension, shift lock control
system, multiport fuel injection
system/sequential multiport fuel
injection system
42 TI&TE30Tilt and telescopic steering
43 MPXB7.5No circuit
44 AM17.5Starter system
45 RR FOG7.5No circuit
46 AIR SUS7.5Electronically modulated air
suspension
47 DOOR
NO. 225Multiplex communication system
48 S/ROOF30Moon roof
No.FUSEAMPERECIRCUIT
49 TAIL10
Front fog lights, instrument
cluster lights, instrument panel
lights, front side marker lights,
tail lights, license plate lights,
towing converter
50 PANEL7.5
Glove box light, instrument
cluster lights, instrument panel
lights, console box light, audio
system, power outlet, garage
door opener switch,
electronically controlled
automatic transmission system,
headlight cleaner, electronically
modulated air suspension, seat
heaters, steering switches,
power back door

ELECTRICAL COMPONENTS
600
No.FUSEAMPERECIRCUIT
51 ECUIGNO. 17.5
Power rear view mirror control,
moon roof, multiplex
communication system,
navigation system display, shift
lock control system, multiplex
communication system (power
door lock system, wireless
remote control system), driving
position memory system, vehicle
stability control system, traction
control system, windshield
wipers, electronically controlled
automatic transmission, seat
heaters, power seats, tilt and
telescopic steering, power back
door, electronically modulated air
suspension
52 ECUIGNO. 210
Automatic headlight leveling
system, vehicle stability control
system, dynamic laser cruise
control, headlight cleaner,
adaptive front −lighting system
53 HEATER7.5
Electric cooling fan, air
conditioning system, rear
window defogger, ignition switch,
windshield wiper de −icer
No.FUSEAMPERECIRCUIT
54 WASHER20Windshield washer
55 SEAT HTR20Seat heaters
56 GAUGE
NO. 17.5
Instrument cluster lights,
instrument panel lights,
emergency flashers, seat belt,
power outlet, rear light failure
warning light, multiport fuel
injection system/sequential
multiport fuel injection system,
back− up lights
57 FR WIP30Windshield wipers
58 RR WIP15Rear window wiper
59 INJ20Multiport fuel injection
system/sequential multiport fuel
injection system
60 IGN10
SRS airbag system, multiport
fuel injection system/sequential
multiport fuel injection system,
front passenger occupant
classification system, stop lights
61 GAUGE
NO. 27.5Gauge and meters

ELECTRICAL COMPONENTS
608
1Type A2Type B3Good4Blown
If the headlights or other electrical components do not
work and the blade type fuses are O.K., check the
cartridge type fuses. If any of the cartridge type fuses are
blown, they must be replaced.
If there is an overload in the circuits from the battery, the fuses
are designed to blow before the entire wiring harness is
damaged.
CAUTION
Always use a genuine Lexus fuse or equivalent for
replacement. Never install an ordinary wire — even for
a temporary fix. This may cause extensive damage and
possibly a fire.
NOTICE
Before replacing the fuses, have the cause of electrical
overload determined and repaired by your Lexus dealer.

ELECTRICAL COMPONENTS
611
REPLACING LIGHT BULBS
The illustration on the following pages show the locations of
light bulbs. If it is necessary to replace a bulb, take your vehicle
to your Lexus dealer as soon as possible. Use bulbs with the
bulb numbers and wattage ratings given in the table.
The stop lights consist of a number of LEDs. If two or more
LEDs burn out, your vehicle may not conform to local laws
(SAE). If this occurs, take your vehicle to your Lexus dealer to
have the light replaced.
CAUTION
 To prevent burning yourself, do not replace the light
bulbs while they are hot.
 Halogen bulbs have pressurized gas inside and
require special handling. They can burst or shatter if
scratched or dropped. Hold a bulb only by its plastic
or metal case. Do not touch the glass part of a bulb
with bare hands.
Vehicles with power back door system —
 When replacing the rear light bulbs, turn off the
power back door system.
Vehicles with discharge headlights —
Do not touch the high voltage socket when the low
beam headlight turns on. 20000 V is momentarily
generated and may cause severe injury by electric
shock.
 Do not disassemble, repair or take apart the low beam
headlight bulbs, connector, power supply circuits
and rotated components. Or you may be injured by
electric shocks. Call your dealer when the headlights
fail to work or have to be replaced or disposed of.
NOTICE
Only use a bulb of the listed type.
The inside of the lens of exterior lights such as headlights may
temporarily fog up when the lens becomes wet in the rain or in
a car wash. This is not a problem because the fogging is
caused by the temperature difference between the outside and
inside of the lens, just like the windshield fogs up in the rain.
However, if there is a large drop of water on the inside of the
lens, or if there is water pooled inside the light, contact your
Lexus dealer.

BODY
616
SPECIFICATIONS
— DIMENSIONS AND WEIGHTSOverall length
4730 mm (186.2 in.)
Overall width1845 mm (72.6 in.)
Overall height*1
Tw o −wheel drive models
Four−wheel drive models — With electronically modulated air suspension
— Without electronically modulated air suspension1670 mm (65.7 in.)*2
1710 mm (67.3 in.)*3
1725 mm (67.9 in.)*4
1670 mm (65.7 in.)*2
1710 mm (67.3 in.)*3
1725 mm (67.9 in.)*4
1680 mm (66.1 in.)*2
1720 mm (67.7 in.)*3
1735 mm (68.3 in.)*4
*1: Unladen vehicle
*2: Without roof rails
*3: With roof rails
*4: With roof rails and cross rails

BODY
617
— DIMENSIONS AND WEIGHTSWheelbase
2715 mm (107 in.)
Tread Tw o −wheel drive models
— Front
— Rear
Four−wheel drive models — Front
— Rear (with electronically
modulated air suspension)
— Rear (without electronically
modulated air suspension)
1580 mm (62.2 in.)
1565 mm (61.6 in.)
1575 mm (62.0 in.)
1560 mm (61.4 in.)
1555 mm (61.2 in.)
Vehicle capacity weight
(occupants + cargo)420 kg (925 lb.)
Towing capacity
(trailer weight + cargo weight)— Without towing package
— With towing package
907 kg (2000 lb.)
1588 kg (3500 lb.)
— FUEL TANK
Capacity
72.5 L (19.2 gal., 15.9 Imp. gal.)

BODY
618
PROTECTING YOUR VEHICLEFROM CORROSION
Proper care of your Lexus can help ensure long −term
corrosion prevention.
The most common causes of corrosion to your vehicle
are:
 The accumulation of road salt, dirt and moisture in
hard−to−reach areas under the vehicle.
 Chipping of paint or undercoating caused by minor
accidents or by stones and gravel.
The following conditions will cause or accelerate
corrosion of your vehicle, so it is important to keep your
vehicle, particularly the underside, as clean as possible
and to repair any damage to paint or protective coatings
as soon as possible.
 The presence of road salt or dust control chemicals, salt in
the air near the sea coast, industrial air pollution.
 High humidity, especially at temperatures just above
freezing point.
 Certain parts of your vehicle are wet or damp for an
extended period of time, even though other parts of the
vehicle are dry.
 Components of the vehicle which are prevented from
quick−drying due to lack of proper ventilation are exposed
to high ambient temperature. To help prevent corrosion on your Lexus, follow these
guidelines:
Keep your vehicle clean by regular washing.
In addition,
observe the following points.
 If you drive on salted roads in the winter or if you live near
the ocean, you should hose off the undercarriage at least
once a month to minimize corrosion.
 High pressure water or steam is effective for cleaning the
vehicle’s underside and wheel housings. Pay particular
attention to these areas as it is difficult to see all the mud and
dirt. It will do more harm than good to simply wet the mud
and debris without removing. The lower edge of doors,
rocker panels and frame members have drain holes which
should not be allowed to clog with dirt as trapped water in
these areas can cause corrosion.
 Wash the underside of the vehicle thoroughly when winter
is over.
See “Washing and waxing” on page 619 for more tips.
Check the condition of your vehicle’s paint and trim. If you
find any chips or scratches in the paint, touch them up
immediately to prevent corrosion from starting. If the chips or
scratches have gone through the bare metal, have a qualified
body shop make the repair.

BODY
620Fuel
filler door: Do not apply water (high −pressure car wash,
for example) at or near the fuel tank inlet with the fuel filler door
opened. If the water enters the air vent, you may experience
trouble with refueling or rough engine idling.
Electronically modulated air suspension: Do not spray a jet
of high−pressure water at the air suspension unit, especially
the air spring, at an extremely close range. This may damage
the air suspension.
Plastic wheel ornaments: The plastic wheel ornaments are
damaged easily by organic substances. If any organic
substance splash an ornament, be sure to wash them off with
water and check if the ornament is damaged.
Aluminum wheels: Use only a mild soap or neutral detergent.
Plastic bumpers and side moldings: Wash carefully. Do not
scrub with abrasive cleaners. The bumper and side molding
faces are soft.
Exterior lights: Wash carefully. Do not use organic
substances or scrub them with a hard brush. This may damage
the surfaces of the lights.
Road tar: Remove with turpentine or cleaners that are marked
safe for painted surfaces.
3. Rinse thoroughly — dried soap can cause streaking. In hot
weather you may need to rinse each section right after you
wash it.
4. To prevent water spots, dry the vehicle using a clean soft
cotton towel. Do not rub or press hard — you might scratch the
paint.
NOTICE
 Do not use organic substances (gasoline, kerosene,
benzine or strong solvents), which may be toxic or
cause damage.
 Do not scrub any part of the vehicle with a hard brush,
which may cause damage.
Automatic car wash
NOTICE
To prevent damage to the antenna, make sure it is
removed before driving your vehicle through an
automatic car wash.
 When your vehicle goes through an automatic car
wash, make sure the power back door system is off.
Your vehicle may be washed in an automatic car wash, but
remember that the paint can be scratched by some types of
brushes, unfiltered washing water, or the washing process
itself. Scratching reduces paint durability and gloss, especially
on darker colors. The manager of the car wash should be able
to advise you whether the process is safe for the paint on your
vehicle.