reset LEXUS RX330 2006 Owners Manual

For detailed information, refer to the description given in each Section\
.
PICTORIAL INDEX
xiiPage
1Driving position memory switches
224
. . . . . . . . . . .
2Power window switches 62
. . . . . . . . . . . . . . . . . . . . . . .
3Power door lock switch 29
. . . . . . . . . . . . . . . . . . . . . . .
4Window lock switch 63
. . . . . . . . . . . . . . . . . . . . . . . . . . .
5Cupholder 112
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6Side vents 257
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7Instrument panel light control knob 90
. . . . . . . . . . . .
8“ODO/TRIP” button 73
. . . . . . . . . . . . . . . . . . . . . . . . . . .
9Ignition switch 385
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10Automatic air conditioning controls 242
. . . . . . . . . .
11Emergency flasher switch 66
. . . . . . . . . . . . . . . . . . . . .
12Security indicator light 16, 43
. . . . . . . . . . . . . . . . . . . .
13Rear view monitor/navigation system including air
conditioning controls (For the navigation system,
see the separate “Navigation System Owner’s
Manual”.) 408 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14Front passenger’s seat belt reminder light 77 . . . . . .
15“AIRBAG ON” and “AIRBAG OFF”
indicator lights 193. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16Rear window and outside rear view
mirror defogger, and windshield wiper
deicer switch 61. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
17Glove box
106
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18Power back door off switch 38
. . . . . . . . . . . . . . . . . . . .
19Automatic transmission selector lever 389, 398 . . . .
20Power outlet (12 VDC) 101
. . . . . . . . . . . . . . . . . . . . . . .
21Height select switch 441
. . . . . . . . . . . . . . . . . . . . . . . . .
22Headlight cleaner switch 60
. . . . . . . . . . . . . . . . . . . . . .
23Driving pattern selector switch 397, 408
. . . . . . . . . . .
24Seat heater switches 67
. . . . . . . . . . . . . . . . . . . . . . . . . .
25Audio system 262, 282
. . . . . . . . . . . . . . . . . . . . . . . . . . .
26Traction control system off switch 451
. . . . . . . . . . .
27Tire pressure warning system reset switch 464 . . . .
28Height control switch 446
. . . . . . . . . . . . . . . . . . . . . . .
29Power outlet (115 VAC) main switch 102
. . . . . . . . . .
30Hood lock release lever 124
. . . . . . . . . . . . . . . . . . . . .
31Parking brake pedal 387
. . . . . . . . . . . . . . . . . . . . . . . . .
32Power back door opener/closer switch 39
. . . . . . . . .
33Easy access mode switch 444
. . . . . . . . . . . . . . . . . . .
34Fuel filler door opener 125
. . . . . . . . . . . . . . . . . . . . . . .
35Adaptive frontlighting system
off switch 51 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
36Power rear view mirror control switches 231 . . . . . .

For detailed information, refer to the description given in each Section\
.
PICTORIAL INDEX
xivPage
1Driving position memory switches
224
. . . . . . . . . . .
2Power window switches 62
. . . . . . . . . . . . . . . . . . . . . . .
3Power door lock switch 29
. . . . . . . . . . . . . . . . . . . . . . .
4Window lock switch 63
. . . . . . . . . . . . . . . . . . . . . . . . . . .
5Cupholder 112
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6Side vents 257
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7Instrument panel light control knob 90
. . . . . . . . . . . .
8“ODO/TRIP” button 73
. . . . . . . . . . . . . . . . . . . . . . . . . . .
9Ignition switch 385
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10Automatic air conditioning controls 242
. . . . . . . . . .
11Emergency flasher switch 66
. . . . . . . . . . . . . . . . . . . . .
12Multidisplay light control button 91
. . . . . . . . . . . . . .
13Security indicator light 16, 43
. . . . . . . . . . . . . . . . . . . .
14Clock buttons 99
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15Front passenger’s seat belt reminder light 77 . . . . . .
16Multidisplay
Cruise information display 87 . . . . . . . . . . . . . . . . . . .
Outside temperature display 100 . . . . . . . . . . . . . . . .
Clock display 99 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Automatic air conditioning display 242 . . . . . . . . . .
17Cruise information display control button 87 . . . . . . .
18“AIRBAG ON” and “AIRBAG OFF”
indicator lights 193. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page
19Rear window and outside rear view
mirror defogger, and windshield wiper
deicer switch 61
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20Glove box 106
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21Power back door off switch 38
. . . . . . . . . . . . . . . . . . . .
22Automatic transmission selector lever 389, 398 . . . .
23Power outlet (12 VDC) 101
. . . . . . . . . . . . . . . . . . . . . . .
24Height select switch 441
. . . . . . . . . . . . . . . . . . . . . . . . .
25Headlight cleaner switch 60
. . . . . . . . . . . . . . . . . . . . . .
26Driving pattern selector switch 397, 408
. . . . . . . . . . .
27Seat heater switches 67
. . . . . . . . . . . . . . . . . . . . . . . . . .
28Audio system 262, 282
. . . . . . . . . . . . . . . . . . . . . . . . . . .
29Traction control system off switch 451
. . . . . . . . . . .
30Tire pressure warning system reset switch 464 . . . .
31Height control switch 446
. . . . . . . . . . . . . . . . . . . . . . .
32Power outlet (115 VAC) main switch 102
. . . . . . . . . .
33Hood lock release lever 124
. . . . . . . . . . . . . . . . . . . . .
34Parking brake pedal 387
. . . . . . . . . . . . . . . . . . . . . . . . .
35Power back door opener/closer switch 39
. . . . . . . . .
36Easy access mode switch 444
. . . . . . . . . . . . . . . . . . .
37Fuel filler door opener 125
. . . . . . . . . . . . . . . . . . . . . . .
38Adaptive frontlighting system
off switch 51 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
39Power rear view mirror control switches 231 . . . . . .

KEYS AND DOORS
29
Locking with power door lock switch
1Lock2Unlock
To lock all the side doors and back door simultaneously,
push the power door lock switch down on the front side.
Pushing down on the rear side will unlock them.
The same switch is also located on the front passenger’s side.
If you do any of the following, no door can be unlocked with the
power door lock switch.
 Lock all the side doors and back door with the key or
wireless remote control when all the side doors and back
door are closed.
 Open the driver’s door or front passenger’s door and move
the inside lock buttons of both front doors to the lock
position, then close the front doors. The power door lock switch can be reset in the following ways.

Turn the ignition key to the “ON” position.
 Unlock all the side doors and back door with the key or
wireless remote control.
 Unlock the driver’s door or front passenger’s door with the
inside lock button, and then unlock all the side doors and
back door with the power door lock switch.
Automatic door locking and unlocking
functions
AUTOMATIC DOOR LOCKING
You can select the following functions:
Locking linked with the shift position
All doors are automatically locked when the selector lever
is moved out of “P” position.
 Locking linked with vehicle speed
All doors are automatically locked when the vehicle speed
goes above about 20 km/h (12 mph).
You can set or cancel the automatic door locking
functions:
Be sure to apply the parking brake when performing the
following operations.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
79
(g) Engine Oil Replacement Reminder Light (forvehicles sold in U.S.A.)
This light acts as a reminder when to replace the engine oil.
This light will come on when the ignition key is turned to the
“ON” position and will go off after about a few seconds.
When you drive for about 7200 km (4500 miles) after the
engine oil replacement, this light illuminates for about 3
seconds and then flashes for about 12 seconds with the
ignition key turned to the “ON” position. If you continue driving
without replacing the engine oil, and if the distance driven
exceeds 8000 km (5000 miles), the light will come on after the
ignition key is turned to the “ON” position. The light will remain
on thereafter.
If the light is flashing, we recommend that you replace the
engine oil at an early opportunity depending on the driving and
road conditions. If the light comes on, replace it as soon as
possible. The system must be reset after the engine oil replacement.
Reset the system by the following procedure:
1. Turn the ignition key to the “LOCK” position with the
odometer
reading shown. (For details, see “Odometer and trip
meter” on page 73.)
2. Turn the ignition key to the “ON” position while holding down
the “ODO/TRIP” button.
Hold down the button for at least 5 seconds. The odometer
indicates “000000” and the light goes off.
If the system fails to reset, the light will continue flashing.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
88The following
information is displayed when you push the
“INFO” button with the ignition switch turned on.
Each time you push the “INFO” button, the display toggles
through this information.
(1) Driving time after engine start
(2) Average vehicle speed after engine start
(3) Average fuel consumption after refueling
(4) Instantaneous fuel consumption
(5) Driving distance after engine start
(6) Driving range
The displayed values in the cruise information display indicate
general driving conditions. Accuracy varies with driving habits
and road conditions.
When the ignition switch is on, the last previously used mode
displayed just before the ignition switch is off will appear. If the electrical power source has been disconnected from the
cruise information display,
the display will automatically be set
to the initial mode.
When the instrument panel lights are turned on, the brightness
of the display will be reduced.
You can adjust the brightness of the display. To adjust the
brightness, see “Multi −display light control” on page 91.
CAUTION
Do not adjust the display while the vehicle is moving.
Be sure to adjust the display only when the vehicle is
stopped.
(1) Driving time after engine start
(“E/T”)
The elapsed time after the engine starts is displayed.
When the engine is started, driving time is counted from 0:00.
Up to 11:59 (11 hours, 59 minutes) can be displayed. When the
driving time exceeds 11:59, the counter returns to 0:00.
The calculation is reset when the ignition switch is turned off.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
89
(2) Average vehicle speed after engine start(“AVG MPH” or “AVG km/h”)
Average vehicle speed after engine start is calculated and
displayed based on total driving distance and total driving
time with the engine running.
The displayed value is updated every 10 seconds.
To reset the calculations, push and hold the “INFO” button for
about 1 second when the display indicates the average vehicle
speed after engine start.
(3) Average fuel consumption after refueling (“AVG MPG” or “AVG L/100 km”)
Average fuel consumption after refueling is calculated
and displayed based on total driving distance and total
fuel consumption with the engine running.
The displayed value is updated every 10 seconds.
The calculation is reset when the vehicle starts after refueling.
(4) Instantaneous fuel consumption(“MPG” or “L/100 km”)
The instantaneous fuel consumption is calculated and
displayed based on distance and fuel consumption for 2
seconds with the engine running.
The displayed value is updated every 2 seconds.
Note that an accurate figure may not be shown in the following
cases.
 The vehicle is stopped with the engine running. (The display
will indicate the extremely high fuel consumption.)
 The vehicle is driving down a long slope applying the engine
brake. (The display will indicate the extremely low fuel
consumption.)
(5) Driving distance after engine start
(“Distance miles” or “Distance km”)
The driving distance after engine start is calculated and
displayed based on vehicle speed after engine running.
The displayed value is updated every time the fuel equivalent
for 0.1 km or 0.1 mile is consumed.
To reset the calculations, push and hold the “INFO” button for
about 1 second when the display indicates the driving distance
after engine start.

INTERIOR EQUIPMENT
99
Foot lights and inside door handle lights
The foot lights and inside door handle lights also come on when
the ignition switch is in the “ON” position with the selector lever
in the “P” position. When the selector lever is moved out of the
“P” position, the foot lights and inside door handle lights will be
dimmed.*
NOTE:
* The foot lights and inside door handle lights can be set to
turn off when the selector lever is moved out of the “P”
position.
Ask your Lexus dealer for details.
When you turn the engine off, the lights remain on for about 15
seconds before fading out.
When the instrument panel light control knob is turned fully
counterclockwise, the foot lights will turn off.
Center console spot lights
The center console spot lights come on when the ignition
switch is in the “ACC” or “ON” position.
Meter ring light
The meter ring light comes on when the ignition switch is in the
“ON” position.
The light also come on and remain on for about 15 seconds
before fading out when the driver’s door is opened. However,
if the driver’s door is opened when you turn the engine off, the
light will not come on.
CLOCK
The digital clock indicates the time with the ignition key at
the “ACC” or “ON” position. To reset the hour, press the
“H” button. To reset the minutes, press the “M” button.
To adjust the time to the nearest hour, press the “:00”
button.
For example, if the “:00” button is pressed when the time is
between 9:30 — 9:59 or between 10:01 — 10:29, the time will
change to 10:00.
When the instrument panel lights are turned on, the brightness
of the display will be reduced.

AUDIO
270
Turn this knob to the right to step up the frequency or to
the left to step down.
Your radio automatically changes to stereo reception when a
stereo broadcast is received. “ST” appears on the display. If
the signal becomes weak, the radio reduces the amount of
channel separation to prevent the weak signal from creating
noise. If the signal becomes extremely weak, the radio
switches from stereo to mono reception. In this case, “ST”
disappears from the display.(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1 — 6) and
hold it until a beep is heard. This sets the station to the
button and the button number (1 — 6) appears on the
display.
Each
button can store one AM station and two FM stations. To
change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse.

AUDIO
271
(c) Selecting a station
Tune in the desired station using one of the following methods.
Seek tuning: Push the “SEEK” button. The radio will begin
seeking up
or down for a station of the nearest frequency and
will stop on reception. Each time you push the button, the
stations will be searched automatically one after another.
Preset tuning: Push the button (1 — 6) for the station you
want. The button number (1 — 6) and station frequency
appear on the display.
Manual tuning: Turn the “TUNE” knob. The radio will step up
or down to another frequency.
To scan all the frequencies: Push the “SCAN” button briefly.
“SCAN” appears on the display. The radio will find the next
station up the band, stay there for a few seconds, and then
scan again. To select a station, push the “SCAN” button a
second time.
To scan the preset stations: Push the “SCAN” button until
you hear a beep. “SCAN” appears on the display. The radio
will tune in the next preset station up the band, stay there for
a few seconds, and then move to the next preset station. To
select a station, push the “SCAN” button a second time.

AUDIO
280(e) Repeating a track
“RPT” button: The repeat feature automatically replays the
current program.
Push the “RPT” button briefly while the track is playing.
“
” will appear on the display. When the track ends, it
will automatically be replayed. This process will be continued
until you push the button again to turn off the repeat feature. (f) Random playing
“RAND” button: Use for listening to the tracks on a CD in
random order.
Push
the “RAND” button briefly. “
” will appear on the
display and play the CD you are listening to in random order.
When a track is skipped or the system is inoperative, push the
button to reset.