headlight bulb LEXUS RX350 2015 Owners Manual

TABLE OF CONTENTS Index
64-1. Maintenance and care
Cleaning and protecting
the vehicle exterior.................. 650
Cleaning and protecting
the vehicle interior ................... 653
4-2. Maintenance
Maintenance requ irements ..... 656
General maintenance ............... 659
Emission inspection and
maintenance (I/M)
programs ....................................... 663
4-3. Do-it-yourself maintenance
Do-it-yourself service
precautions .................................. 664
Hood.................................................. 667
Positioning a floor jack.............. 668
Engine compartment.................. 670
Tires .................................................. 684
Tire inflation pressure ................. 693
Wheels.............................................. 697
Air conditioning filter .................. 699
Electronic key battery ................. 701
Checking and replacing
fuses ................................................ 703
Headlight aim.................................. 716
Light bulbs ........................................ 719 5-1. Essential information
Emergency flashers..................... 734
If your vehicle needs to be
towed.............................................. 735
If you think something is
wrong ............................................. 742
Fuel pump shut off system ........ 743
5-2. Steps to take in an emergency
If a warning light turns on
or a warning buzzer
sounds... ........................................ 744
If a warning message is
displayed ....................................... 754
If you have a flat tire..................... 774
If the engine will not start .......... 789
If the shift lever cannot be
shifted from P ............................... 791
If you lose your keys .................... 792
If the electronic key does
not operate properly ............... 793
If the vehicle battery is
discharged ................................... 796
If your vehicle ov erheats ........... 799
If the vehicle becomes
stuck............................................... 802
If your vehicle has to
be stopped in an
emergency .................................. 8044
Maintenance and care 5
When trouble arises

Maintenance and care
4
6494-1. Maintenance and care
Cleaning and protecting
the vehicle exterior............. 650
Cleaning and protecting
the vehicle interior .............. 653
4-2. Maintenance
Maintenance
requirements ........................ 656
General maintenance .......... 659
Emission inspection and
maintenance (I/M)
programs................................ 663 4-3. Do-it-yourself
maintenance
Do-it-yourself service
precautions ........................... 664
Hood ........................................... 667
Positioning a floor jack ......... 668
Engine compartment ............ 670
Tires............................................ 684
Tire inflation pressure........... 693
Wheels ....................................... 697
Air conditioning filter ........... 699
Electronic key battery........... 701
Checking and replacing
fuses ........................................ 703
Headlight aim ........................... 716
Light bulbs ................................. 719

7194-3. Do-it-yourself maintenance
4
Maintenance and care Light bulbs You may replace the following bulbs by yourself. The difficulty level of
replacement varies depending on the bulb. If necessary bulb replacement
seems difficult to perform, contact your Lexus dealer.
For more information about replacing other light bulbs, contact your Lexus
dealer.
■ Preparing for light bulb replacement
Check the wattage of the light bulb to be replaced. (  P. 817)
■ Removing the engine compartment covers
 P. 6 7 1
■ Turning off the power back door main switch
 P. 5 8
■ Front bulb locations
Vehicles with halogen headlights Headlight high beamHeadlight low beam
Front turn signal light

7224-3. Do-it-yourself maintenance
Replacing light bulbs
■ Headlight high beams
Right side:
Open the cap.
Move the washer fluid filler
opening to allow easy access to
the light bulbs.
Unplug the connector while
depressing the lock release.
Turn the bulb base counterclock-
wise.STEP 1
STEP 2
STEP 3

7234-3. Do-it-yourself maintenance
4
Maintenance and care Replace the light bulb, and install
the bulb base. Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn and secure the bulb base.
Connect the connector. Shake the bulb base gently to
check that it is not loose, turn the
headlight high beams on once and
visually confirm that no light is leak-
ing through the mounting.
When replacing the right side bulb, install by conducting
with the directions reversed.STEP 4
STEP 5
STEP 5STEP 6
STEP 5STEP 1

7244-3. Do-it-yourself maintenance
■ Halogen headlight low beams (if equipped)
Turn the bulb base counterclock-
wise.
Unplug the connector while
depressing the lock release.
Replace the light bulb, and install
the bulb base. Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn and secure the bulb base.
Shake the bulb base gently to
check that it is not loose, turn the
headlight low beams on once and
visually confirm that no light is leak-
ing through the mounting.STEP 1
STEP 2
STEP 3
STEP 4

7294-3. Do-it-yourself maintenance
4
Maintenance and care ■ Rear side marker light (left side)
Turn the bulb base counterclock-
wise.
Remove the light bulb.
■ Lights other than the above
If any of the lights listed below ha s burnt out, have it replaced by your
Lexus dealer.
● Discharge headlight low beams (if equipped)
● Daytime running lights
● Parking lights
● Front side marker lights
● Front fog lights
● Side turn signal lights
● Stop lights
● High mounted stoplight
● License plate lightsSTEP 1
STEP 2

7304-3. Do-it-yourself maintenance
■
Discharge headlights (if equipped)
If voltage to the discharge bulbs is insufficient, the bulbs may not come on, or may
go out temporarily. The discharge bulbs will come on when normal power is
restored.■
LED bulbs
The daytime running lights, parking lights, front side marker lights, LED front fog
lights (if equipped), side turn signal lights, stop lights, high mounted stoplight and
licence plate lights consist of a number of LEDs. If any of the LEDs burn out, take
your vehicle to your Lexus dealer to have the light replaced.■
Condensation build-up on the inside of the lens
Temporary condensation build-up on the inside of the headlight lens does not indi-
cate a malfunction. Contact your Lexus dealer for more information in the following
situations: ●
Large drops of water are built up on the inside of the lens.●
Water has built up inside the headlight.

7314-3. Do-it-yourself maintenance
4
Maintenance and care CAUTION■
Replacing light bulbs ●
Turn off the lights. Do not attempt to replace the bulb immediately after turning
off the lights.
The bulbs become very hot and may cause burns.●
Do not touch the glass portion of the li ght bulb with bare hands. When it is
unavoidable to hold the glass portion, use and hold with a clean dry cloth to avoid
getting moisture and oils on the bulb.
Also, if the bulb is scratched or dropped, it may blow out or crack.●
Fully install light bulbs and any parts used to secure them. Failure to do so may
result in heat damage, fire, or water en tering the headlight unit. This may damage
the headlights or cause condensation to build up on the lens. ●
Vehicles with discharge headlights:
While the low beam headlights are turned
on, and for a short time after they have
been turned off, metal components at the
rear of the headlight assembly will be
extremely hot. To prevent burns, do not
touch these metal components until you
are certain they have cooled down.Metal components

7324-3. Do-it-yourself maintenance
CAUTION■
Discharge headlights (if equipped) ●
Contact your Lexus dealer be fore replacing discharge he adlights (including light
bulbs).●
Do not touch the discharge headlight’s high voltage socket when the headlights
are turned on.
An extremely high voltage of 30000 V wi ll be discharged and could result in
serious injury or death by electric shock.●
Do not attempt to take apart or repair the low beam discharge headlight bulbs,
connectors, power supply circuits, or related components.
Doing so could result in electric shock and serious injury or death.■
To prevent damage or fire
Make sure bulbs are fully seated and locked.