ect LEXUS SC300 1991 Service Repair Manual

PARTS LOCATION
±
BODY ELECTRICAL SYSTEM Power Seat Control System (Driver's Seat)BE±267
WhereEverybodyKnowsYourName

HOW TO PROCEED WITH TROUBLESHOOTING
Perform troubleshooting in accordance with the procedure on the following page.\

CUSTOMER PROBLEM ANALYSIS
Using the customer problem analysis check sheet for reference, ask the c\
ustomer in as much detail as
possible about the problem.
\b PROBLEM SYMPTOM CONFIRMATION,  SYMPTOM SIMULATION.
Confirm the problem symptoms. If the problem does not reappear, be sure to simulate the problem using
the ºProblem Simulation Methodsº.
When checking the problem symptoms, pay attention to the following points to\
accurately define the symp-
toms and the extent of the problem:
For ºNot Functioningº problems:
(1) Is the problem only in one part (e.g. ºreclining onlyº), or ever\
ything?
(2) Is the problem only for manual operation, only for position return opera\
tion, or for both manual and position return operation?
(3) Is tilt, telescopic and outer mirror operation normal?
(4) Does the problem occur with the ignition key inserted, or not inserted?
 MATRIX CHART OF PROBLEM SYMPTOMS
Confirm the order of inspection on the matrix chart for the particular problem symptom involved. For ºNot
Functioningº problems, pay attention to the points in \b. to find out the specifics of the problem, then choose
the most appropriate problem symptom from among those listed on the matr\
ix chart, and proceed with trou-
bleshooting accordingly.
 CIRCUIT INSPECTION
Proceed with diagnosis of each circuit in accordance with the inspection\
order confirmed in .
Determine whether the cause of the problem is in the sensor, actuators, wire harness and connectors, or
the ECU.
 POSITION SENSOR CHECK
This function checks that the signal from each position sensor is correctly input into\
the ECU when the
manual switch is turned ON. The instructions for this diagnosis are included in\
the flow chart for the position
sensor circuit.
 REPAIR
After the cause of the problem is located, perform repairs by following the i\
nspection and replacement pro-
cedures is this manual.
 CONFIRMATION TEST
After completing repairs, confirm that the problem is eliminated and that tilt, telescopic and outer mirror
operation is normal.
BE±268
±
BODY ELECTRICAL SYSTEM Power Seat Control System (Driver's Seat)
WhereEverybodyKnowsYourName

BE±270IN±20
BE±276
BE±284 BE±306
±
BODY ELECTRICAL SYSTEM Power Seat Control System (Driver's Seat)BE±269
WhereEverybodyKnowsYourName

CUSTOMER PROBLEM ANALYSIS CHECK SHEET
POWER SEAT Check Sheet
Inspector 's
Name :
 


 


 

Registration No.
 


 

Customer 's Name
 


 

Registration Year
 

//
 


 


 

Frame No.
 


 

Date Vehicle
Brought In 

//
 

Odometer Reading
 

Km
Miles
 

Condition of
Problem
 

Date Problem
Occurrence\
 

\
//
 



Problem
Occurrence 



How Often does
Problem Occur?
\
 





Continuous
Intermittent ( times a day)
 




 






Manual Function
does not operate
\
 



\



Slide
Front Vertical

Rear Vertical
Reclining
Lumbar Support
 








Symptoms
 










Return Function
does not operate\
 







\



Slide
Front Vertical

Rear Vertical
Reclining

Does not operate in any conditions

Only with key inserted

Only with key not inserted

Only with memory & return switch 1 or 2
 \
 \

Memory function does not operate. 


\
 
\

\


Position return function does not stop when brake pedal is depressed.
For ªReturn function does not operateº malfunctions, check the ret\
urn operation of the items below.
 


Ch k It
 

Tilt & Telescopic
\
 

\


OK
NG
 


Check Item 

Outer Mirror
\
 

\


OK
NG
BE±270±
BODY ELECTRICAL SYSTEM Power Seat Control System (Driver's Seat)
WhereEverybodyKnowsYourName

WIRING DIAGRAM
No.SymbolTerminal NameNo.SymbolTerminal NameNo.SymbolTerminal Name
P11
±1SLDFSlide Switch (Forward)P11±13CHKCheckP10±7IGIgnition Switch
2RCLFReclining Switch (Forward)14SSRRReclining Sensor8GND2Ground 2
3FUPFront Vertical Switch (UP)15SSRVRear Vertical Sensor9SLD±Slide Motor (Back)
4RUPRear Vertical Switch (UP)16SSRSSlide Sensor10RCL±Reclining Motor (Down)
5SSFVFront Vertical Switch17SOSerial Communications11FRV±Front Vertical Motor (Down)
6PVCCPosition Sensor Power
Source18SGNDSensor Ground12RRV±Rear Vertical Motor (Down)
7SYSBPower SourceP10±1GNDGround13RRV+Rear Vertical Motor (For-
ward)
8SISerial Communications2SLD+Slide Motor (Forward)14+B2Power Source
9SLDRSlide Switch (Back)3RCL+Reclining Motor (Up)15PNeutral Start Switch
10RCLRReclining Switch (Back)4FRV+Front Vertical Motor (Up)16±±±±
11FDWNFront Vertical Switch (Down)5+BPower Source
12RDWNRear Vertical Switch (Down)6STOPStop Light
BE±272±
BODY ELECTRICAL SYSTEM Power Seat Control System (Driver's Seat)
WhereEverybodyKnowsYourName

STANDARD VALUE OF ECU TERMINAL
TerminalsSymbolsWiringColorConditionStandard Value
P11±1 eBody
GroundSLDF eBody
Ground
LSeat moved forward using slide SWBelow 1 VL
Others10±14 V
P11±2 eBody
GroundRCLF eBody
GroundY±RSeat moved forward using reclining SWBelow 1 V
Others10±14 V
P11±3 eBody
GroundFUP eBody
GroundL±YSeat raised using front vertical SWBelow 1 V
Others10±14 V
P11±4 eBody
GroundRUP eBody
GroundY±GSeat raised using rear vertical SWBelow 1 V
Others10±14 V
P11±5 eP11±18SSFV eSGNDLG±R eBR±BFront vertical operation0 V e8 V
P11±6 eP11±18PVCC eSGNDVe BR±BManual position return operation8 V
P11±7 eP10±1SYSB eGNDRe W±BAlways10±14 V
P11 8SIW
Signals between power seat ECU & tilt
telescopic ECU0 V e12 V
P11±8SIW
OthersResistance
(approx. 2.5 k
)
P11±9 eBody
GroundSLDR eBody
Ground
L±BSeat moved to rear using slide SWBelow 1 VL±B
Others10±14 V
P11±10 eBody
GroundRCLR eBody
Ground
Y±BSeat moved to rear using reclining SWBelow 1 VY±B
Others10±14 V
P11±11 eBody
GroundFDWN eBody
Ground
L±RSeat lowered using front vertical SWBelow 1 VL±R
Others10±14 V
P11±12 eBody
GroundRDWN eBody
Ground
Y±LSeat lowered using rear vertical SWBelow 1 VY±L
Others10±14 V
P11±13CHK
P11±14 eP11±18SSRR eSGNDV±W eBR±BReclining operation0 V e8 V
P11±15 eP11±18SSRV eSGNDY±G eBR±BRear vertical operation0 V e8 V
P11±16 eP11±18SSRS eSGNDLG eBR±BSlide operation0 V e8 V
±
BODY ELECTRICAL SYSTEM Power Seat Control System (Driver's Seat)BE±273
WhereEverybodyKnowsYourName

 
P11±17 SO B Signals between power seat ECU & tilt 0Ve12 V   B 
Signals between ower seat ECU & tilt
telescopic ECU 0 V e12 V
 P11±18 SGND BR±B Always Below 1 V
 P10±1 GND W±B Always Below 1 V
 P10±2 eP10±1 SLD+ eGND Le W±B Seat moved forward using slide SW 10±14 V
    Others Below 1 V
 

P10±3
eP10±1
 

RCL+
eGND
 

Y±R
eW±B
 


Seat moved forward using reclining
SW 

10±14 V
    Others Below 1 V
 P10±4
eP10±1 FRV+ eGND L±Y eW±B Seat raised using front vertical SW 10±14 V
    Others Below 1 V
 P10±5 +B L±W Always 10±14 V P10±6 eBody Ground STOP eBody Ground Ge W Brake pedal depressed 10±14 V    Others (Several
or less) Below 1 V P10±7 IG B±R Ignition SW ON 10±14 V P10±8 GND2 W±B Always Below 1 V P10±9 eP10±1 SLD± eGND L±B eW±B Seat moved to rear using slide SW 10±14 V    Others Below 1 V 
P10±10 eP10±1
 
RCL± eGND
 
Y±B eW±B
 
Seat moved to rear using reclining SW
 
10±14 V    
Others
 
Below 1 V 

P10±11
eP10±1
 

FRV±
eGND
 

L±R
eW±B
 

Seat lowered using front vertical SW
 

10±14 V
    Others Below 1 V
 P10±12
eP10±1 RRV± eGND Y±LW±B Seat lowered using rear vertical 10±14 V
    Others Below 1 V
 P10±13 eP10±1 RRV+ eGND Y±L eW±B Seat raised using rear vertical 10±14 V
    Others Below 1 V
 P10±14 +B2 L±W Always 10±14 V
 P10±15 eBody Ground Pe Body Ground GR Shift lever in ºPº with IG ON 10±14 V
    Others (10
or less) Below 1 V
 P10±16 ±± ±± ±± ±±
BE±274±
BODY ELECTRICAL SYSTEM Power Seat Control System (Driver's Seat)
WhereEverybodyKnowsYourName

See page
BE±284
BE±28 6
BE±28 8
MATRIX CHART OF PROBLEM SYMPTOMS
Perform troubleshooting of the circuits for the applicable problem symptom in t\
he order given in the chart below.
Proceed to the page located for each circuit.
The Driver's Seat ECU communicates with the tilt & telescopic ECU about memory and \
return, so there are occa-
sions when a power seat problem symptom is caused by trouble in the tilt and telescopic circuit.\
When the
instruction ºSee tilt and telescopic sectionº appears in the matrix chart, pr\
oceed to the matrix chart (see page
SR±28 ) in the tilt and telescopic section and inspect the circuits as direct\
ed by the matrix chart.
BE±276
±
BODY ELECTRICAL SYSTEM Power Seat Control System (Driver's Seat)
WhereEverybodyKnowsYourName

BE±292
BE±29 4
BE±29 8
BE±30 0
BE±30 2
BE±30 4
BE±30 6
IN±32
See tilt and telescopic section on page SR±28
See tilt and telescopic section on page SR±28
See tilt and telescopic section on page SR±28
HINT:
w
If the instruction ºProceed to next circuit inspection shown on matrix \
chartº is given in the flow chart for each
circuit, proceed to the circuit with the next highest number in the table to con\
tinue the check.
w If the trouble still reappears even though there are no abnormalities in a\
ny of the other circuits, then check
and replace the driver's seat ECU as the last step.
±
BODY ELECTRICAL SYSTEM Power Seat Control System (Driver's Seat)BE±277
WhereEverybodyKnowsYourName

LOCATION OF CONNECTORS
Location of Connectors in Engine Compartment
BE±278±
BODY ELECTRICAL SYSTEM Power Seat Control System (Driver's Seat)
WhereEverybodyKnowsYourName