open LEXUS SC300 1999 User Guide

GAUGES, METERS AND SERVICE REMINDER INDICATORS
59
(l) Low Washer Fluid Warning Light
This light comes on when the fluid level in the tank becomes
nearly empty. Fill the tank as soon as possible.
(m) Low Fuel Level Warning Light
This light comes on when the fuel level in the tank becomes
nearly empty. Fill the tank as soon as possible.
On inclines or curves, due to the movement of fuel in the tank,
the low fuel level warning light may come on earlier than
usual.
(n) Key Reminder Buzzer
This buzzer reminds you to remove the key when you open
the driver's door with the ignition key in the ºACCº or
ºLOCKº position.
How to check all the service reminder
indicators
(except the low fuel level warning light):
1. Apply the parking brake.
2. Open the door.
The following service reminder indicator should come on. It
goes off when you close the door completely.
3. Turn the ignition key to ºACCº.
The following service reminder indicator should come on. It
goes off after 6 seconds.
4. Turn the ignition key to ºONº.
The following service reminder indicators should come on.

SECTION 1 ± 4
65
INSTRUMENTS AND CONTROLS
Interior equipment
Vanity mirrors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
.
65
Interior light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. .
66
Personal lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
.
67
Ignition switch light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
68
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . . . . .
69
Cigarette lighter and ashtray . . . . . . . . . . . . . . . . . . . . . . . . . .
69
Glovebox . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . .
72
Garage door opener 73
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cup holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . .
76
Floor mat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . \
. . . . .
78
Luggage stowage precautions . . . . . . . . . . . . . . . . . . . . . . . . .
80
VANITY MIRRORS

INTERIOR EQUIPMENT
66
To use the vanity mirrors, swing the sun visor down and
open the cover.
The vanity light comes on when you open the cover.INTERIOR LIGHT

INTERIOR EQUIPMENT
67
To turn on the interior light, slide the switch.
With the switch in the ºDOORº position, the light comes on
when either of the side doors is opened. After both doors are
closed, the light remains on for about 15 seconds and then
goes out.
However, in the following cases, the light goes out
immediately:
1. Both doors are closed when the ignition key is in ºACCº
or ºONº position.
2. The ignition key is turned to ºACCº or ºONº when the
light is still on.
3. Both doors are locked when the light is still on.
4. One door is closed with the lock button pushed in while the
other door is locked.
PERSONAL LIGHTS

INTERIOR EQUIPMENT
68To turn on the personal light, push the switch. To turn it
off, push the switch again.
IGNITION SWITCH LIGHT
For easy access to the ignition switch, the ignition switch
light comes on when either of the side doors is opened.
The light remains on for about 15 seconds and goes out after
both side doors are closed. However, the light goes out
immediately when both doors are locked or the ignition key
is in the ºACCº or ºONº position.

INTERIOR EQUIPMENT
70
To use the cigarette lighter and ashtray, first pull the
button. Then when the ashtray opens out, press in the
cigarette lighter. When it becomes heated, it
automatically pops out ready for use.
Do not hold the cigarette lighter pressed in.
If the engine is not running, the ignition key must be in the
ºACCº position.
When finished with your cigarette, thoroughly extinguish it
in the ashtray to prevent other cigarette butts from catching
fire. After using the ashtray, push it back in completely.
To remove the ashtray, pull it out.
Use a Lexus genuine cigarette lighter or equivalent for
replacement.

INTERIOR EQUIPMENT
72
GLOVEBOX
To open the glovebox door, push the lock release button.
To lock the glovebox door, insert the master key and turn
it clockwise.
With the tail lights on, the glovebox light will come on when
the glovebox door is open.
CAUTION
To reduce the chance of injury in case of an accident or a
sudden stop, always keep the glovebox door closed while
driving.

INTERIOR EQUIPMENT
73
GARAGE DOOR OPENER
The garage door opener is manufactured under license
from HomeLink and can be programmed to operate
garage doors, estate gates, security lighting, etc.
(a) Programming HomeLink
The HomeLink has 3 buttons and can be pr ogrammed to
operate 3 separate devices.
Prepare the HomeLink
 for programming by erasing all
codes or the memorized data programmed by the former
owner. Follow the procedure in º(c) Erasing the garage
door opener memoryº.
1. Decide which one of the 3 buttons you want to program.
Push and hold down the button for about 20 seconds until the
indicator light begins to flash. While holding this button,
follow steps º2º and º3º.

INTERIOR EQUIPMENT
742. Bring the hand held garage door opener within about 25
mm (1 in.) of the button being programmed and push the
button on the hand held garage door opener. The signal from
the hand held garage door opener is sent to the vehicle's
opener.
3. When the frequency and code is registered, the indicator
light flashes rapidly. At this point, you can release both
buttons.
4. To program the remaining buttons, repeat steps º1º
through º3º.
If you want to replace an existing program with a new
program, select the button you want to program. Follow the
procedure from step 1.
If the transmitter has a ºrolling code featureº, it is
necessary to program the in±garage receiver after
programming
HomeLink
.
1. Locate the ºtrainingº or ºlearningº button on the
in±garage receiver and push and release this button.
Location of the button may vary by the garage door
opener manufacturer.
2. Firmly push and release the trained HomeLink
 button
2 times (some garage door manufacturer may r equire you
to push the HomeLink
 button up to 3 times) to complete
the process.
The garage door should now operate when the
HomeLink
 button is pushed. Do not use the HomeLink
 universal transmitter with any
garage door opener that lacks the safety stop and reverse
feature as required by Federal Safety Standards. This
includes any garage door opener model manufactured before
April 1, 1982.

INTERIOR EQUIPMENT
75
CAUTION
When programming or operating the garage door opener,
make sure there is no one around the moving door. It is
dangerous if someone is caught.
(b) Operating the garage door opener
Push the appropriate button to activate the garage door
opener. The indicator light comes on. The garage door
opener continues to send the signal for up to 20 seconds as
long as the button is pushed.
(c) Erasing the garage door opener memory
Push and hold down the 2 outside buttons for about 20
seconds until the indicator light flashes. All memorized data
will be erased.FCC ID: CB2V94800
This device complies with FCC Rules part 15.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference that
may be received, including interference that may
cause undesired operation. WARNING: This
transmitter has been tested and complies with
FCC and DOC/MDC rules. Changes or
modifications not expressly approved by the
partly responsible for compliance could void the
user's authority to operate the device.