CD player LEXUS SC400 1991 Service Owner's Manual

12Tape playerCASSETTE TAPE WILL NOT EJECT
A. without CD player type
Is there battery voltage between the following ter-
minals with connector connected?

Radio receiver amplifier A3 ± ground

Radio receiver amplifier A4 ± ground Replace fuse.
Wire harness faulty.
Wire harness faulty.
Is radio operating normally?
Check if RADIO No.1 and RADIO NO.2 fuses are OK Is tape player operating normally?
Radio receiver assembly faulty
Is there continuity between the following terminals
with connector disconnected?


Radio receiver amplifier A7 ± ground Cassette tape is
jammed or radio receiv-
er assembly faulty.
Radio receiver assem-
bly faulty.
BE±236±
BODY ELECTRICAL SYSTEM AUDIO SYSTEM
WhereEverybodyKnowsYourName

B. with CD player
Is there battery voltage between the following ter-
minals with connector connected?

Radio receiver amplifier A3 ± ground

Radio receiver amplifier A4 ± ground Replace fuse.
Wire harness faulty.
Is radio operating normally?
Check if RADIO No.1 and RADIO NO.2 fuses are OK Is tape player operating normally?
Power amplifier faulty.
Is there continuity between the following terminals
with connector disconnected?


Radio receiver amplifier A11 ± ground Cassette tape is
jammed or radio receiv-
er assembly faulty.
Radio receiver assem-
bly faulty.
Wire harness faulty. Wire harness faulty.Radio receiver assembly faulty.
Is there continuity between the following terminals
with connector disconnected?

Radio receiver amplifier A11 ± Power amplifier A11
Is there continuity between the following terminals
with connector disconnected?

Power amplifier B7 ± ground
±
BODY ELECTRICAL SYSTEM AUDIO SYSTEMBE±237
WhereEverybodyKnowsYourName

13Tape playerDISPLAY INDICATES, BUT NO SOUND IS
PRODUCED (EXCEPT WOOFER)
A. without CD player type
Is radio operating normally?Radio receiver assembly faulty.
Radio receiver assembly faulty. Is there continuity between the following terminals
with connector disconnected?


Radio receiver amplifier B1 ± Power switch 14

Radio receiver amplifier B3 ± Power switch 11
When the volume switch is turned from minu-
mum to maximum, does resistance between
terminal B1±B3 of radio receiver assembly
change from 0 to 50 k
?
is resistance value approx. 50 k  between ter-
minals B3±B6 of radio receiver assembly? Is there continuity between the following terminals
with connector disconnected?


Radio receiver amplifier B6 ± Power switch 13
Power switch faulty. Wire harness faulty. Power switch faulty. Wire harness faulty.
BE±238±
BODY ELECTRICAL SYSTEM AUDIO SYSTEM
WhereEverybodyKnowsYourName

B. with CD player type
Is radio operating normally?Radio receiver assembly faulty.
Is there continuity between the following terminals
with connector disconnected?

Radio receiver amplifier B1 ± Power switch 14

Radio receiver amplifier B3 ± Power switch 11
When the volume switch is turned from minu-
mum to maximum, does resistance between
terminal B1±B3 of radio receiver assembly
change from 0 to 50 k
?
is resistance value about 50 k  between termi-
nals B3±B6 of radio receiver assembly? Is there continuity between the following terminals
with connector disconnected?


Radio receiver amplifier B6 ± Power switch 13
Power switch faulty. Wire harness faulty.
Power switch faulty.
Wire harness faulty.
Is there continuity between the following terminals
with connector disconnected?

Radio receiver amplifier A1 ± Power switch A6
Radio receiver as-
sembly faulty. Wire harness faulty.
Wire harness faulty.
Power amplifier faulty. Wire harness faulty.
Is there continuity between the following terminals
with connector disconnected?

Power amplifier A6 ± ground
Is there battery voltage between the following ter-
minals with connector disconnected?


Power amplifier A14 ± ground

Power amplifier B10 ± ground
Is there continuity between the following terminals
with connector disconnected?

Power amplifier A7 ± ground
±
BODY ELECTRICAL SYSTEM AUDIO SYSTEMBE±239
WhereEverybodyKnowsYourName

14Tape playerANY SPEAKER DOES NOT WORK (EXCEPT
WOOFER)
A. without CD player type
Is there continuity between the following terminals
with connector disconnected?

Fr: Radio receiver assembly A1±FR speaker 1
Radio receiver assembly A5±FR speaker 2

FL: Radio receiver assembly A2±FL speaker 1
Radio receiver assembly A6±FL speaker 2

RR: Radio receiver assembly C1±RR speaker 1
Radio receiver assembly C3±RR speaker 2

RL: Radio receiver assembly C2±RL speaker 1
Radio receiver assembly C6±RL speaker 2
Is there continuity between the following terminals
with connector disconnected?

FR: Radio receiver assembly A1±ground
Radio receiver assembly A5±ground

FL: Radio receiver assembly A2±ground
Radio receiver assembly A6±ground

RR: Radio receiver assembly C1±ground
Radio receiver assembly C3±ground

RL: Radio receiver assembly C2±ground
Radio receiver assembly C6±ground Wire harness faulty


(The wire harness for the FR speaker passes
through the transceiver, so the transceiver side
should be checked) Wire harness faulty

(The wire harness for the FR speaker passes
through the transceiver, so the transceiver side
should be checked)
Speaker faulty.
Radio receiver assembly faulty.
Is tape player operating normally?
Temporarily install another speaker.
Functions OK?
Radio receiver assembly faulty.
BE±240±
BODY ELECTRICAL SYSTEM AUDIO SYSTEM
WhereEverybodyKnowsYourName

B. with CD player type
Is there continuity between the following terminals
with connector disconnected?

Fr: Power amplifier B1±FR speaker 1
Power amplifier B5±FR speaker 2

FL: Power amplifier B2±FL speaker 1
Power amplifier B6±FL speaker 2

RR: Power amplifier B3±RR speaker 1
Power amplifier B4±RR speaker 2

RL: Power amplifier B8±RL speaker 1
Power amplifier B9±RL speaker 2
Is there continuity between the following terminals
with connector disconnected?

FR: Power amplifier B1±ground
Power amplifier B5±ground

FL: Power amplifier B2±ground
Power amplifier B6±ground

RR: Power amplifier B3±ground
Power amplifier B4±ground

RL: Power amplifier B8±ground
Power amplifier B9±ground Wire harness faulty


(The wire harness for the FR speaker passes
through the transceiver, so the transceiver side
should be checked) Wire harness faulty

(The wire harness for the FR speaker passes
through the transceiver, so the transceiver side
should be checked)
Speaker faulty. Radio receiver assembly faulty.
Is tape player operating normally?
Temporarily install another speaker.
Functions OK?
Wire harness faulty.
Wire harness faulty.
Is there continuity between the following terminals
with connector disconnected?


FR: Radio receiver assembly A7±Power
amplifier A1

FL: Radio receiver assembly A6±Power
amplifier A2

RR: Radio receiver assembly A15±Power
amplifier A7

RL: Radio receiver assembly A14±Power
amplifier A8
Is there continuity between the following terminals
with connector disconnected?

FR: Radio receiver assembly A7±ground

FL: Radio receiver assembly A6±ground

RR: Radio receiver assembly A15±ground

RL: Radio receiver assembly A14±ground
±
BODY ELECTRICAL SYSTEM AUDIO SYSTEMBE±241
WhereEverybodyKnowsYourName

15Tape playerVOLUME FAINT (EXCEPT WOOFER)
A. without CD player type
Is radio operating normally?Radio receiver assembly faulty.
When the volume switch is turned from minumum to
maximum, does resistance between terminal B1±B3
of radio receiver assembly change from 0 to 50 k ? Power switch faulty.
Wire harness faulty.
Is there battery voltage between the following ter-
minals with connector disconnected?

Radio receiver assembly D3 ± ground
Radio receiver assembly faulty.
B. with CD player type
Is radio operating normally? Radio receiver assembly faulty.
When the volume switch is turned from minumum to
maximum, does resistance between terminal B1±B3
of radio receiver assembly change from 0 to 50 k ? Power switch faulty.
Wire harness faulty.
Is there battery voltage between the following ter-
minals with connector disconnected?

Radio receiver assembly D3 ± ground
Radio receiver assembly faulty. Power amplifier faulty.
Temporarily install another power amplifier.
Function is OK?
±
BODY ELECTRICAL SYSTEM AUDIO SYSTEMBE±243
WhereEverybodyKnowsYourName

16Tape playerWOOFER DOES NOT WORK
A. without CD player type
Is radio operating normally?Radio receiver assembly faulty.
Wire harness faulty.
Is there battery voltage between the following ter-
minals with connector connected?


Woofer amplifier 3 ± ground

Woofer amplifier 4 ± ground
Is there battery voltage between the following ter-
minals with connector connected?

Woofer amplifier 6 ± ground
Is there continuity between the following termi-
nals with connector disconnected?

Woofer amplifier 7 ± ground
Wire harness faulty.
Wire harness faulty.
Woofer faulty.
Wire harness faulty.
Is there continuity between the following terminals
with connector disconnected?

Radio receiver assembly A9 ± Woofer amplifier 6
Radio receiver
assembly faulty. Wire harness faulty.
Is there continuity between the following terminals
with connector connected?

Woofer amplifier 9 ± Woofer 2

Woofer amplifier 10 ± Woofer 1
Is there continuity between the following terminals
with connector connected?

Woofer amplifier 9 ± ground

Woofer amplifier 10 ± ground
Temporarily install another woofer.
Functions OK? Radio receiver assembly faulty
BE±244±
BODY ELECTRICAL SYSTEM AUDIO SYSTEM
WhereEverybodyKnowsYourName

B. with CD player type
HINT: The part names and terminals indicated in brackets ( ) are for model\
s with a Nakamichi system.
Is radio operating normally?Radio receiver assembly faulty.
Woofer faulty.
Wire harness faulty.
Is there battery voltage between the following
terminals with connector connected?

Woofer amplifier 3 (Power amplifier C3) ± ground

Woofer amplifier 4 (Power amplifier C4) ± ground
Temporarily install another woofer.
Functions OK? Radio receiver assembly faulty Wire harness faulty.
Wire harness faulty.
Wire harness faulty.
Wire harness faulty.
Is there continuity between the following terminals
with connector disconnected?


Woofer amplifier 9 (Power amplifier C9) ±
Woofer 2

Woofer amplifier 10 (Power amplifier C10) ±
Woofer 1
Is there continuity between the following terminals
with connector disconnected?

Woofer amplifier 9 (Power amplifier C9) ± ground

Woofer amplifier 10 (Power amplifier C10) ±
ground
Is there battery voltage between the following
terminals with connector connected?


Woofer amplifier 6 (Power amplifier C6) ± ground
Is there continuity between the following terminals
with connector connected?

Woofer amplifier 7 (Power amplifier C7) ± ground
±
BODY ELECTRICAL SYSTEM AUDIO SYSTEMBE±245
WhereEverybodyKnowsYourName

17Tape playerWOOFER VOLUME FAINT
A. without CD player type
Is radio operating normally?Radio receiver assembly faulty.
Wire harness faulty.
Is there continuity between the following terminals
with connector connected?

Radio receiver assembly D1 ± Woofer amplifier 1

Radio receiver assembly D5 ± Woofer amplifier 5
Wire harness faulty.
Woofer amplifier faulty.
Radio receiver assembly faulty.
Temporarily install another woofer amplifier.
Funcitions OK? Is there continuity between the following terminals
with connector disconnected?


Radio receiver assembly D1 ± ground

Radio receiver assembly D5 ± ground
B. with CD player type
HINT: The part names and terminals indicated in brackets ( ) are for model\
s with a Nakamichi system.
Is radio operating normally?
Radio receiver assembly faulty.
Wire harness faulty.
Is there continuity between the following terminals
with connector connected?

Radio receiver assembly D1 ± Woofer
amplifier 1 (Power amplifier C1)

Radio receiver assembly D5 ± Woofer
amplifier 5 (Power amplifier C5)
Wire harness faulty.
Woofer amplifier faulty.
Radio receiver assembly faulty. Temporarily install another woofer amplifier.
Funcitions OK? Is there continuity between the following terminals
with connector disconnected?

Radio receiver assembly D1 ± ground

Radio receiver assembly D5 ± ground
BE±246±
BODY ELECTRICAL SYSTEM AUDIO SYSTEM
WhereEverybodyKnowsYourName