3. INSTALL BRAKE CALIPERInstall the brake caliper to the steering cnuckle with the 2
bolts.
Torque: 118 N Vm (1,200 kgf Vcm, 87 ft Vlbf)
4. STABILIZE SUSPENSION
(a) Install the front wheel and jack down the vehicle.
Torque: 103 N Vm (1,050 kgf Vcm, 76 ft Vlbf)
(b) Bounce the vehicle up and down several times to stabilize the
suspension.
5. TORQUE ADJUSTING CAMS AND NUTS
(a) Jack up the vehicle and remove the front wheel.
(b) Support the lower arm with jack.
(c) Align the matchmarks and torque the adjusting cams and nuts with the vehicle weight on the suspension.
Torque: 226 N Vm (2,300 kgf Vcm, 166 ft Vlbf)
6. INSTALL ENGINE UNDER COVER
7. INSTALL FRONT WHEEL
Torque: 103 N Vm (1,050 kgf Vcm, 76 ft Vlbf)
8. CHECK FRONT WHEEL ALIGNMENT
(See page SA±5)
SA±44
±
SUSPENSION AND AXLE FRONT SUSPENSION
WhereEverybodyKnowsYourName
7. STABILIZE SUSPENSION
(a) Install the rear wheel and lower the vehicle.
Torque: 103 NVm (1,050 kgf Vcm, 76 ft Vlbf)
(b) Bounce the vehicle up and down several times to stabilize the
suspension.
8. TORQUE BOLT AND NUTS
(a) Jack up the vehicle and remove the rear wheel.
(b) Support the axle carrier with jack.
(c) Torque the bolt and nuts.
Torque: 184 N Vm (1,880 kgf Vcm, 136 ft Vlbf)
9. INSTALL REAR WHEEL AND LOWER VEHICLE
Torque: 103 N Vm (1,050 kgf Vcm, 76 ft Vlbf)
10. CHECK REAR WHEEL ALIGNMENT
(See page SA±10)
HUB BOLT REPLACEMENT
SA03E±04
1. JACK UP VEHICLE AND REMOVE REAR WHEEL
2. REMOVE REAR BRAKE CALIPER AND BRAKE DISC
(See page SA±52)
3. REMOVE HUB BOLT Using SST, remove the hub bolt.
SST 09628±10011
4. INSTALL HUB BOLT Install washer and nut to the hub bolt, as shown in the illustra-
tion, and install the hub bolt with torquing the nut.
5. INSTALL REAR BRAKE DISC AND BRAKE CALIPER (See page SA±60)
6. INSTALL REAR WHEEL AND LOWER VEHICLE
Torque: 103 N Vm (1,050 kgf Vcm, 76 ft Vlbf)
±
SUSPENSION AND AXLE REAR AXLE HUBSA±61
WhereEverybodyKnowsYourName
