heating LINCOLN CORSAIR 2023 Owners Manual

ADJUSTING THE EXTERIOR
MIRRORS
WARNING: Do not adjust the mirrorswhen your vehicle is moving. This couldresult in the loss of control of your vehicle,serious personal injury or death.
Power fold.A
Window lock.B
Adjustment control.C
Right-hand mirror.D
Left-hand mirror.E
To adjust the mirrors, switch your vehicle onand place the ignition in accessory or start.
1.Select the mirror you want to adjust. Thecontrol light turns on.
2.Use the adjustment control to adjust theposition of the mirror.
3.Press the mirror control again. Thecontrol light turns off.
FOLDING THE EXTERIOR MIRRORS
With the auto-fold feature enabled, theexterior mirrors fold in toward the glass afteryou place the transmission into park (P), turnoff the vehicle, open and close the driverside door and lock the vehicle. The exteriormirrors unfold and return to their drivingposition after you unlock the vehicle andopen and close the driver side door.
For tight parking conditions, pressthe control to fold the mirrors.
Press the control again to unfold the mirrors.
If you press the control to fold in the mirrorswith auto-fold on, the mirrors do not unfoldwhen you unlock your vehicle.
Note:The power folding mirrors operate withthe ignition on, and for several minutes afteryou switch the ignition off.
Note:If you fold and unfold the mirrorsseveral times within one minute, the powerfold function may turn off to protect themotors from overheating.
Switching Auto-fold On and Off
1.Press Settings on the touchscreen.
2.Press Vehicle Settings.
3.Press Mirrors.
4.Switch Autofold on or off.
134
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOMExterior MirrorsE368669

IDENTIFYING THE CLIMATE
CONTROL UNIT
Note:Depending on your vehicle options,the controls may look different from whatyou see here.
SWITCHING CLIMATE CONTROL
ON AND OFF
Press the button to activate theselection screen.
Press the button.
SWITCHING RECIRCULATED AIR
ON AND OFF
Press the button to activate theselection screen.
Press the button to recirculate aircurrently in the passengercompartment.
Note:Recirculated air may turn offautomatically, or prevent you from switchingon in all air flow modes except MAX A/C toreduce the risk of fogging. Recirculation mayalso turn on and off automatically in variousair distribution control combinations toimprove heating or cooling efficiency.
SWITCHING AIR CONDITIONING
ON AND OFF
Press the button.
Note:Under certain conditions, the airconditioning compressor could continue tooperate after you switch air conditioning off.
Note:To keep the system and itscomponents fully functional, switch airconditioning on and let your vehicle idle atleast once per month for a minimum of twominutes.
SWITCHING DEFROST ON AND
OFF
Press the button to activate theselection screen.
Press the button on thetouchscreen to switch thewindshield air vents on.
Make sure that the instrumentpanel air vents are switched off.
Make sure that the footwell airvents are switched off.
168
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOMClimate ControlE372889 E265283 E265283 E265283 E244097 E244098

SWITCHING DUAL MODE ON AND OFF
Press the button to activate theselection screen.
Press the button.
Note:When dual mode is off, setting thetemperature using the driver side controls,sets the temperature for both sides.
Note:Setting the temperature using thepassenger side controls, sets the passengertemperature and switches dual mode on.
CLIMATE CONTROL HINTS
General Hints
•Prolonged use of recirculated air maycause the windows to fog up.
•You may feel a small amount of air fromthe footwell air vents regardless of theair distribution setting.
•To reduce humidity build-up inside yourvehicle, do not drive with the systemswitched off or with recirculated airalways switched on.
•Do not place objects under the frontseats as this may interfere with theairflow to the rear seats.
•Remove any snow, ice or leaves from theair intake area at the base of thewindshield.
•To improve the time to reach acomfortable temperature in hot weather,drive with the windows open until youfeel cold air through the air vents.
Automatic Climate Control
•Adjusting the settings when your vehicleinterior is extremely hot or cold is notnecessary. Automatic mode is bestrecommended to maintain settemperature.
•The system adjusts to heat or cool theinterior to the temperature you select asquickly as possible.
•For the system to function efficiently, theinstrument panel and side air ventsshould be fully open.
•If you press AUTO during cold outsidetemperatures, the system directs air flowto the windshield and side window airvents.In addition, the blower motor mayrun at a slower speed until the enginewarms up.
•If you press AUTO during hottemperatures and the inside of thevehicle is hot, the system usesrecirculated air to maximize interiorcooling. Blower motor speed may alsoreduce until the air cools.
Quickly Heating the Interior
1.Press AUTO.
2.Adjust the temperature function to thesetting you prefer.
Recommended Settings for Heating
1.Press AUTO.
172
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOMClimate ControlE265283 E265280

Programming the Garage Door Openerto your Gate Opener Motor
Gate Operator / Canadian Programming
Canadian radio-frequency laws requiretransmitter signals to time-out (or quit) afterseveral seconds of transmission – which maynot be long enough for HomeLink to pick upthe signal during programming. Similar tothis Canadian law, some U.S. gate operatorsare designed to time-out in the same manner.
Note:If programming a garage door openeror gate operator, it is advised that youunplug the device during the cycling processto prevent possible overheating.
1.Press and release your handheldtransmitter, every two seconds, until theHomeLink indicator flashes rapidly or iscontinuously on.
2.Release the handheld transmitter button.
3.Press and hold the HomeLink functionbutton you want to program for twoseconds, then release. You may need todo this twice to activate the door.
Note:If the indicator stays on, theprogramming is complete.
Note:If the HomeLink indicator flashesrapidly, repeat Step 3.
4.To program additional buttons, repeatSteps 1–4.
Additional assistance can be found online atwww.homelink.com/Ford or by calling thetoll-free help line at 1-800-355-3515.
GARAGE DOOR OPENER
ADDITIONAL ASSISTANCE
Video Setup Instructions
Universal Garage Door Opener: HomeLink
Universal Garage Door Opener: HomeLinkfor Genie Intellicode 2
Universal Garage Door Opener Homelinkfor Genie Intellicode
Additional assistance can be found online atwww.homelink.com/Ford or by calling thetoll-free help line at 1-800-355-3515.
198
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOMGarage Door Opener (If Equipped)

WHAT IS A HYBRID ELECTRIC
VEHICLE
A hybrid vehicle has an electric motor and ahigh voltage battery combined with agasoline engine.
HOW DOES A HYBRID ELECTRIC
VEHICLE WORK
The hybrid vehicle combines electric andgasoline propulsion to provide optimalperformance and improved efficiency.
HYBRID ELECTRIC VEHICLE
DRIVING CHARACTERISTICS
The gasoline engine starts and stops toprovide power when required and to savefuel when not needed. When coasting at lowspeeds, coming to a stop or standing, thegas engine normally shuts down and yourvehicle operates in electric-only mode.
Conditions that may cause the gasolineengine to start or remain running include:
•Considerable vehicle acceleration.
•Driving uphill.
•The high voltage battery charge level islow.
•Heating or cooling the vehicle interior inhigh or low outside temperatures.
•The gasoline engine is below normaloperating temperature.
•Towing a trailer.
•Certain selectable drive modes couldcause the engine to run. See Selectinga Drive Mode (page 338).
Your hybrid vehicle also comes with standardhydraulic braking and regenerative braking.Regenerative braking is performed by yourtransmission and captures brake energy andstores it in the high voltage battery.
You could also notice that your enginecontinues to run instead of shutting off duringextended downhill driving. The engine stayson during this engine braking but is not usingany fuel.
You could also hear a slight whine or whistlewhen operating your vehicle. This is thenormal operation of the electric motor in thehybrid system.
Note:Having your engine running is notalways an indication of inefficiency. In somecases, it is actually more efficient thandriving in electric mode.
HYBRID ELECTRIC VEHICLE
INDICATORS
When you start your vehicle, agreen READY indicator lightappears in the instrument clusterletting you know that your vehicle is readyfor driving.
The engine may not start because yourvehicle has a silent key start feature. Thisfuel saving feature allows your vehicle to beready to drive without requiring the gasengine to be running.
213
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOMHybrid Electric Vehicle Information - Plug-In Hybrid Electric Vehicle (PHEV)E293827

The indicator remains on when your vehicleis on, whether the engine is running or not,to indicate your vehicle is capable ofmovement using the electric motor, gasengine or both.
Typically, the engine does not start unlessthe vehicle is cold, a climate control changeis requested or you press the acceleratorpedal.
HYBRID ELECTRIC VEHICLE
INFORMATION – TROUBLESHOOTING
HYBRID ELECTRIC VEHICLEINFORMATION – WARNING LAMPS
Illuminates if your vehicle has anelectrical component fault or failurethat causes your vehicle to shutdown or enter a limited operating mode. Amessage may appear in the instrumentcluster display.
HYBRID ELECTRIC VEHICLEINFORMATION – INFORMATIONMESSAGES
ActionMessage
Displays when amalfunction occursin the high voltageelectric system. Stopyour vehicle as soonas it is safe to do so.Have your vehiclechecked as soon aspossible.
Stop Safely Now
HYBRID ELECTRIC VEHICLEINFORMATION – FREQUENTLY ASKEDQUESTIONS
What should I do if the vehicle runs out offuel and the high voltage battery is out ofcharge?
Refuel and start your vehicle normally.The engine will recharge the highvoltage battery.
Why does the engine sometimes start atkey-on?
The vehicle's computer determines if anengine start is required at key-on. Itstarts the engine when necessary forcabin heating, windshield defrost, or ifthe outside temperature is low.
Can I put E15 or E85 in my vehicle, and howwill it affect my fuel economy?
Your hybrid vehicle can use E15 (15%ethanol, 85% gasoline) fuel, but you maynotice slightly reduced fuel economybecause ethanol contains less energyper gallon than gasoline. Your hybridvehicle is not designed to use E85 (85%ethanol).
Why does it take a long time before theengine shuts down?
There are several reasons the enginestays on for an extended amount of timewhen you first start it. One commonreason is to make sure that theemissions components are warmenough to minimize tailpipe emission.As the climate gets cooler, theengine-on time is extended.
214
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOMHybrid Electric Vehicle Information - Plug-In Hybrid Electric Vehicle (PHEV)E384927

Why does my engine stay on when it isextremely cold outside?
In order to make sure that the climatecontrol system can begin heating thecabin or defrosting the windshield assoon as a driver requests it, the enginecoolant temperature has to be keptsufficiently hot. Keeping the engine onis required to maintain the correctcoolant temperature.
PLUG-IN HYBRID ELECTRIC VEHICLE
INFORMATION
WHAT IS A PLUG-IN HYBRID ELECTRICVEHICLE
A plug-in hybrid electric vehicle combines agasoline engine with an electric motor andrechargeable high voltage battery allowingyou to use only electricity to power yourvehicle.
HOW DOES A PLUG-IN HYBRIDELECTRIC VEHICLE WORK
Charging your vehicle adds electrical energythat propels the vehicle, providing extendedelectric-only driving range. System conditionscould require the engine to operate whileelectric-only range is still available. When theelectric range reaches zero, the powertrainsystem operates as a hybrid electric vehicle.See How Does a Hybrid Electric VehicleWork (page 213).
PLUG-IN HYBRID ELECTRIC VEHICLEDRIVING CHARACTERISTICS
Your plug-in hybrid vehicle shares the drivingcharacteristics of hybrid electric vehicles withthe addition of extended electric- only drivingrange and unique selectable drive modes.See Hybrid Electric Vehicle DrivingCharacteristics (page 213).
The system maximizes the use ofelectric-only operation in normal drive mode.System conditions could require the engineto operate, however, the system uses theavailable electric range whenever possible.
In Pure EV drive mode, your vehicle typicallyuses only electric power. The engineoperates to provide extra power when youfully press the accelerator pedal. Systemconditions may also require the engine tooperate.
Preserve EV drive mode saves the electricrange for later use. If you select this modeand the battery is at full or near full charge,it uses some electric-only range to dischargethe battery. This allows the regenerativebraking system to fully operate. If batterycharge is low when this mode is selected theengine charges the high voltage battery toprovide some electric range for later.
Other drive modes use electric power asnecessary to deliver the selected drive modeexperience. See What Is Drive ModeControl (page 338).
PLUG-IN HYBRID ELECTRIC VEHICLEINDICATORS
When you start your vehicle, agreen ready indicator light appearsin the instrument cluster letting youknow that your vehicle is ready for driving.
215
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOMHybrid Electric Vehicle Information - Plug-In Hybrid Electric Vehicle (PHEV)E293827

ACTIONMODEREDBLUEAMBER
Make sure the outlet is operational, and the circuit breakeris in the ON position or try using another outlet. Make surethe connector is fully inserted into the mobile power cordand the plug is not severely degraded. If the error persists,contact us.
UNPOWERED;The mobile power cord is not powered.OFFOFFOFF
No action required.CHARGING;OFFPULSINGOFFThe mobile power cord is charging.
If you expect the mobile power cord to be charging thevehicle, make sure the vehicle coupler is properly insertedinto the vehicle. Check and adjust your charging timepreferences in the on-screen display. If your vehicle is stillnot charging, contact us.
STANDBY;The mobile power cord is powered andready to charge. At the current time themobile power cord is not charging thevehicle.
OFFONOFF
Wait for the mobile power cord to return to standby. If themobile power cord cycles for more than 2-3 minutes,unplug the vehicle coupler. Unplug and replug in theconnector. If the issue persists, contact us.
REBOOTING;The mobile power cord is recoveringafter encountering an error.
ONONON
Make sure the connector and the control box are properlyconnected. Unplug and replug in the connector. If themobile power cord is warm or in a hot environment, trycharging in a cooler area. Try a different outlet. Try adifferent connector if you have one available. If the errorpersists, contact us.
CHARGING REDUCED;The mobile power cord is charging ata reduced rate due to overheating.
OFFPULSINGON
244
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOMCharging Your Vehicle - Plug-In Hybrid Electric Vehicle (PHEV)

ACTIONMODEREDBLUEAMBER
Make sure the connector and control box are properlyconnected. Unplug and replug in the connector. If themobile power cord is warm or in a hot environment, trycharging in a cooler area. Try a different outlet. Try adifferent connector if you have one available. If the errorpersists, contact us.
CHARGING REDUCED, AC PLUG ORWALL OUTLET;The mobile power cord is charging ata reduced rate due to overheating ofthe connector or the wall outlet.
OFFPULSING1 FLASH
Make sure the connector and control box are properlyconnected. Unplug and replug in the connector. If themobile power cord is warm or in a hot environment, trycharging in a cooler area. Try a different outlet. Try adifferent connector if you have one available. If the errorpersists, contact us.
USER TROUBLESHOOTING;The mobile power cord hasencountered a fault that requirestroubleshooting.
OFFOFFON
Try a different connector if you have one available. If theerror persists, contact us.NON - RECOVERABLE FAULT;There is an internal fault in the mobilepower cord that cannot be recovered.
ONOFFOFF
Try using another connector if you have one available. Ifnot, contact us about obtaining a replacement. If yourwarranty has expired, you can order a replacement fromyour Ford dealer.
NON - RECOVERABLE FAULT;There is an internal fault in theconnector that cannot be recovered.
1 FLASHOFFOFF
Potential shock hazard - immediately turn off circuitbreaker for the outlet within home. Discontinue use.Contact us about obtaining a replacement.
GROUND LEAKAGE FAULT;Electrical current is leaking through apotentially unsafe path.
PULSINGOFFOFF
245
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOMCharging Your Vehicle - Plug-In Hybrid Electric Vehicle (PHEV)

Note:By using energy from your chargingsource while plugged in, battery temperaturecan be managed for best drivingperformance and less energy is needed forheating or cooling of the cabin at the startof your drive. This helps maximize yourdriving range.
Note:You can also access this feature usingthe LincolnWay app.
Departure and Comfort Setup
Follow these steps to set departure timesand cabin comfort level.
1.Press the edit button for departure andcomfort on the charge settings screen.
2.Two time settings show for each day ofthe week on the departure timesschedule screen. Select any one.
3.On the Departure Times settings screen,set your desired time, cabin comfort leveland days of the week to repeat. PressSave.
4.Your settings are now shown on thedeparture times schedule screen. Pressback to return to the main charge settingsscreen. The next departure time andcabin temperature display.
Note:Cabin conditioning comfort level couldvary depending on whether you plug into anormal household outlet or a higher poweroutlet or charging station. The poweravailable for conditioning is limited to thecharging station power available. At lowambient temperatures and low chargepower, a small amount of high voltagebattery power in addition to the chargingpower could be used to heat the cabin.
Charging Locations
Press the edit button to setpreferred charging times for aspecific charging location.
Your vehicle prioritizes charging based onyour preferred time settings. You can set twopreferred charging time windows forweekdays and two for weekends. Thisfeature allows you to take advantage ofelectric utility rate plans that offer lowerpricing during certain times of day. Contactyour utility company to see what plans areavailable.
Note:Your vehicle charges during yourpreferred time windows. Charging outsidethese windows only occurs when additionalcharging time is needed to reach themaximum charge limit set for this locationby your next departure time. In this case, thevehicle begins charging right away afterplugging in.
Note:You can also access this feature usingthe LincolnWay app.
Charging Location Setup
Follow these steps to set time andcharge level preferences for acharging location.
1.Press the edit button for charginglocations on the charge settings screen.
253
2023 Corsair (CTF) Canada/United States of America, enUSA, Edition date: 202208, DOMCharging Your Vehicle - Plug-In Hybrid Electric Vehicle (PHEV)E353986 E353986