glove box LINCOLN MKT 2012 Quick Reference Guide
[x] Cancel search | Manufacturer: LINCOLN, Model Year: 2012, Model line: MKT, Model: LINCOLN MKT 2012Pages: 2, PDF Size: 0.95 MB
Page 2 of 2

This Quick Reference Guide is not intended to replace your vehicle Owner\
’s Guide which contains more
detailed information concerning the features of your vehicle, as well as\
important safety warnings designed
to help reduce the risk of injury to you and your passengers. Please read your entire Owner’s Guide carefully
as you begin learning about your new vehicle and refer to the appropriat\
e sections when questions arise.
All information contained in this Quick Reference Guide was accurate at \
the time of
duplication. We reserve the right to change features, operation and/or functionality
of any vehicle specification at any time. Your Lincoln dealer is the best source for the
most current information. For detailed operating and safety information,\
please
consult your Owner’s Guide.
CE9J 19G217 AA
Lincoln MKT
May 2011
First Printing
Quick Reference Guide
Litho in USA
Ford Motor Company, Customer Relationship Center
P.O. Box 6248 Dearborn, MI 48121 1-800-392-3673 (FORD)
(TDD for the hearing impaired: 1-800-232-5952) lincolnowner.com
www.lincolncanada.com
KEYLESS
ENTRY
Press once to lock all doors.
Press again to confirm all doors are closed.
Press
once to unlock the driver’s door.
Press again within three seconds to unlock all doors.
Press
to activate the panic alarm.
Press again or turn on the ignition to deactivate.
Press
twice within three seconds to open the liftgate.
CAR fINDeR: Press
twice within three seconds to locate your vehicle.
The horn will chirp and the turn lamps will flash.
The intelligent access key also contains a mechanical key blade which ca\
n be
used to unlock the driver door. Simply press the release button on the back of the
transmitter and slide the key blade out.
To uNLoCk THe DRIVeR’S DooR: Simply have the intelligent key within approximately three feet (in your pocket or purse, for example) and press any button on the keyless entry keypad.
To uNLoCk THe LIfTgATe: Have the intelligent key within approximately three feet and press the exterior liftgate release button located just above the license plate.
To START THe CAR: Have the intelligent key inside the vehicle,
press the brake pedal and press the ENGINE START button next to the steering wheel.
INTELLIGENT A CCESS
(IA) KEY
Intelligent access keys allow you to unlock
the vehicle door(s) or liftgate and start the car
without using a key (provided your intelligent
access key is within range).To uNLoCk THe DRIVeR’S DooR:
Enter your five digit factory code or your personal code.
To uNLoCk ALL DooRS: Enter your five digit factory code (or personal code) and, within five seconds, press 3-4.
To LoCk ALL VeHICLe DooRS: Press and hold 7-8 and 9-0 at the same time (you do not need to enter your code first).
SECURICODE™
KEYLESS ENTRY SYSTEM
Allows you to lock or unlock the doors without
using a key. Ensure that you have your five digit
factory code located on your owner’s wallet
card in the glove box. ACTIvE PARK ASSIST
(if equipped)
The active park assist system
can detect an available parallel
parking space and automatically
steer the vehicle into that
space (hands-free). The system
instructs the driver with visual
and/or audible instructions with
regard to braking, accelerating
and shifting gears in order
to safely park the vehicle. To
initiate active park assist, press
the Auto P control on the center
console and follow the system
instructions as prompted by the
message center. Use the turn
signal to designate which side
of the street to search for a
spot. If the turn signal is not on,
the system will automatically
search the passenger side. To
stop the parking procedure,
grab the steering wheel or press
the control again. Note: Park
Assist does not replace the need to watch where the vehicle is
moving. Refer to your Owner’s
Guide for safety information,
more detail and limitations.
AD
jUSTABLE HEAD
RESTRAINTS
Your vehicle’s head restraints
can be adjusted to suit your
needs. Simply pull up or down
on the head restraint to select
the desired position. You may
also be able to tilt the head
restraint forward or backward
for additional comfort.
IMPRO vED fUEL
ECONOMY WHILE
COASTING OR
DECELERATING
Your vehicle has been designed
to improve fuel economy by
reducing fuel usage while
coasting or decelerating. This may be perceived as a light to
medium braking sensation when
removing your foot from the
accelerator pedal.
SOS POST-CRASH
ALERT SYSTEM
TM
This system provides audible
and visual alarms when a
crash causes the deployment
of airbags or the activation of
the safety belt pretensioners.
The turn signals will flash
and the horn will sound. To
deactivate, press the hazard
flasher control, or
on your
remote transmitter.
C ONSOLE REfRIGERATOR/fREEZER (if equipped)
Your vehicle may be equipped with
a refrigerator/freezer located in
the second row console.
To access, flip the console lid
forward and then lift off the cover.
(Ensure that you replace the cover
after you are done as it helps
maintain a consistent
cooling temperature.)
To uSe THe SYSTeM AS
A RefRIgeRAToR:
Press the COOL side of the control.
The indicator light will illuminate
when the refrigerator is active.
In this mode, the system will cool
to approximately 41° F (5° C).
Press COOL again to turn off the
refrigerator mode or press FREEZE
to change to freezer mode. Note:
The system will only work when
the vehicle’s ignition is on.To uSe THe SYSTeM AS
A fReezeR:
Press the FREEZE side of the
control. The indicator light will
illuminate when the freezer is
active. The system will cool
to approximately 23° F (-5° C).
Press FREEZE again to turn off
the freezer or COOL to switch to
refrigerator mode.
2 0 12
Power – Press to turn on/off.
Driver Temperature – Press
to activate, turn to increase/
decrease the temperature on the
driver side of the vehicle (when
the passenger temperature
control is active) or for the
entire vehicle cabin (when the
passenger temperature control
is not active).
Heated
and Cooled
Driver/Passenger Seats – Push
once to activate high heat/cool
(three indicator lights), press
twice for medium heat/cool (two
indicator lights), press three
times for low heat/cool (one
indicator light) and press again
to deactivate.
Passenger Temperature – Press
to activate the passenger side
climate control (dual zone). Turn
the control to increase/decrease
temperature on the passenger side. Press again to turn off and
return to single zone where the
driver side temperature control
determines the temperature for
the entire vehicle.
AuTo – Press to activate
automatic temperature control.
The system will automatically
determine fan speed, airflow
location, A/C (on or off) and
outside or recirculated air, to
heat or cool the vehicle to reach
the desired temperature.
fan Speed – Press + to
increase or – to decrease
fan speed.
: Distributes outside air
through the windshield defroster
and demister vents. Can be
used to clear thin ice or fog
from the windshield.
: Using recirculated air
may reduce the amount of time needed to cool down the interior
of the vehicle and may also
help reduce undesirable odors
from reaching the interior of
the vehicle.
: Press to activate and
clear the rear window and side
heated mirrors of thin ice and
fog. Press again to deactivate.
Second Row Heated
and
Cooled Seats (if equipped) –
These controls are located on
the rear of the floor console.
Press once to activate high heat/
cool (three indicator lights),
twice for medium heat/cool (two
indicator lights) and three times
for low heat/cool (one indicator
light). Press again to turn off.
Note: You can also access
many of your climate features
via the touchscreen. Simply
press the CLIMATE hard button
and then make your selection
on the touchscreen. Refer to
your Owner’s Guide for
more information.
CLIMATE
CONTROLADDITIONAL fEATURES
REAR vIEW
CAMERA
This system provides a visual
display of the area behind
the vehicle. The display
automatically appears in the
touchscreen when the vehicle
is in R (Reverse) and uses
colors (green, yellow and red)
to alert you of your proximity to
objects. Note: Visibility aids do
not replace the need to watch
where the vehicle is moving.
Refer to your Owner’s Guide for
safety information, more detail
and limitations. BLIND SPOT
INf ORMATION
S YSTEM
® (BLIS®)
WITH CROSS
TRAffIC ALERT (CTA)
(if equipped)
BLIS® uses radar sensors to
help you determine if a vehicle
may be in your blind spot zone
(extending rearward from
the front outside mirrors to
approximately 10 ft. beyond the
bumper) when driving on roads
and freeways. The CTA feature
alerts you if a car is coming
towards you when you are
backing out of a parking space.
Refer to your Owner’s Guide for
more information. REvERSE
SENSING
SYSTEM
The reverse sensing system
may warn you if there is an
object behind the vehicle. A
warning tone will sound which
increases in frequency as the
object gets closer and then will
sound continuously when the
object is less than 10 inches
away. The system is active when
the vehicle is in Reverse (R)
and traveling less than 3 mph
(5 km/h). Note: Visibility aids do
not replace the need to watch
where the vehicle is moving.
Refer to your Owner’s Guide for
safety information, more detail
and limitations.
M
yKe y®
When MyKey® is programmed:
• Belt-Minder
® cannot be disabled and will
sound continuously and the audio will be
muted until the safety belt is buckled.
• Audible and visual low fuel warnings
are provided.
• Audio volume can be limited.
• Vehicle speed can be limited. •
Audible and visual speed warnings can be
configured at preselected speeds.
• Certain features cannot be turned off
such as, Blind Spot Information System
®
(BLIS®) with Cross Traffic Alert and
collision warning.
• AdvanceTrac
® cannot be programmed off.
Allows you to program certain driving restrictions on any
standard key in order to promote good driving habits.
For complete information, refer to MyKey
® in the Locks and Security chapter in your Owner’s Guide.
LINCOLN• MKT
QUICK REfERENCE GUIDE
LINCOLN
MKT