display LUCID AIR 2023 Owner's Guide

Media and Audio
Media Overview
To launch media, tap the Media icon on
the Right Cockpit Panel.
Applications displayed in the Smart Drawer
window on the Right Cockpit Panel allow you
to browse the contents. The Pilot Panel view
of the smart drawer shows additional controls
for lists and libraries.
Tap on a media item to select and play media
from that source.
Infotainment122

Using Alexa
Alexa Built-In
Overview
The Lucid Air comes equipped with Amazon
Alexa Built-In allowing users to give voice commands for navigating to destinations,making phone calls, sending and receiving
text messages, playing music, adjusting
temperature and controlling smart home
devices.
Authentication
To sign in to Alexa:
1. From the Pilot Panel, go to Settings > Applications > Alexa.
2. On your mobile device, go to amazon.com/code and enter in the 5-
character code or scan the QR code displayed on the Pilot Panel.
3. If you

Maps and Navigation
Navigation Overview
To access navigation, press the icon
on the right Cockpit Panel. This screen will
display your current location and street name
(where applicable).
If you pan away from the current location, the
street name will be replaced by a Recenter
button. Touching Recenter is a quick way to
return to the default view showing the current
position.
Note: Upon first use of the navigation system
by a User Profile, that user will receive a
prompt and must read and agree to the Terms
and Conditions before proceeding.
The smart drawer can expand the Navigation
screen into the Pilot Panel for additional
details menus not available in the smaller
Cockpit Panel.
Navigation Settings
On the Pilot Panel, press the icon on
the Navigation screen to configure navigation
options, including:
- Offline Mode: Nav App Settings now has
an Offline mode if Users are concerned
about Privacy. GPS will still be available,
but you will not be connected to a
server. Before using this mode, you must
first download maps to use in Offline
mode.
- Downloadable Maps: Users can now
download one or more states or
provinces at a time.
Downloadable maps are used when
connectivity is lost. You can also pause
and resume a download to control what
gets downloaded and when.
Note: When connectivity is lost, and
when using only downloaded maps, the number of Points of Interest for Search
is more limited, and the route is no
longer an EV Route - it won

Navigating
To navigate to a location, open the smart
drawer on the right Cockpit Panel to select
a destination. Use Alexa voice commands
to navigate hands-free. Tap the search icon
of choose from one of the search category
shortcuts or recent destinations and search
terms.
Move the smart drawer into the Cockpit Panel
to access additional options:
-Use the Search bar to type in an address
via the on-screen keyboard.
- You can also select one of the six
categories. Swipe left or right to view
additional categories.
- You can also make your own shortcuts
for HOME and WORK: Select from your
saved home and work locations. See Setting Home and Work Destinations on
page 132.
- When you tap the search bar, by default
you will seeRECENTS: Select from a list
of recently-used destinations or search
terms. If you start typing something,
those will be replaced with search
matches.
- Search this Area (at another location on
the map if you pan the map)
When routing, you have 2 additional ways to
search:
-Along The Route
- Near Destination
Charging Category Search
From the main Navigation smart drawer,
tap the CHARGING category to view nearby
charging stations. Where possible, these
include plug type and availability information
(requires data connectivity).
The default view shows nearby Electrify
America DC fast chargers above 150
kilowatts, which provide the best charger user
experience. There is a switch to turn off
Electrify America only, to see a mix of nearby
charging providers.
You can also manually Sort and Filter based
on criteria like availability, distance, power,
plug type, or charging vendor (such as
Electrify America).
Routing
All Lucid routes are EV routes. Lucid EV
routes are integrated with your vehicle
range and consumption profile. It considers
not just the current state of charge, road
profile, temperature, Heating, ventilation,
and air conditioning (HVAC) and traffic
conditions, but it also predicts your unique
vehicle consumption over time under those
conditions.
Once a location is specified, the map will
display an overview of the proposed route on
both the ICR and the CID. Up to 3 Route
Options will be shown, each with its own
written summary and visual display on the
map. The recommended top option is the
Fastest route (least time spend driving), and
it will be shown on the map in blue. The other
alternative suggestions will also be shown on
the map but in gray. Traffic conditions on
each route will be included. If charge stops
are required, they will be auto-added to all 3
routes and will be displayed on all 3 routes.
Before you tap GO, you can preview and
plan your route on the MY ROUTE screen,
which will show up to three route options
including the estimated time of arrival (ETA),
Infotainment130

total distance, and traffic conditions along the
route. If the route requires charging stops to reach the destination, then charging stops will
automatically be added and shown on this
screen as well.
Note: Because the Auto )add Charging
feature is enabled by default, the system
automatically calculates the battery power
needed for the trip and the recommended charging time for each charging stop.
Once the route has started, the turn-by-
turn guidance instructions are shown on the
top navigation screen. Lane guidance, exit
numbers, and other guidance details will be
displayed when appropriate. While routing, if the navigation is replaced with media or
phone, navigation instructions will remain in
view in the Center Cockpit Panel while a route
is in progress.
The MANAGE tab summarizes the stops and their specific details. The DETAILS tab lists
every turn and stop along your route.
When the system automatically adds charging stops, extra details are provided for eachstop such as estimated percent on arrival,
suggested plug type to use, suggested number
of minutes to charge for, and suggested
minimum percent to charge up to. This
information will persistently show in both the
DETAILS tab and the MANAGE tab until your
route ends.You can also tap each Waypoint on
the Route directly from the map view to see
more details.
When starting a trip, we initially show you in
the smart drawer a full list of instructions.
This list automatically minimizes after thirty
seconds, to use the full screen for viewing
your maps and route. The route will display all
of your stops and traffic conditions. The smart
drawer with the list of instructions and details
about your stops can be manually reopened.
You can add, reorder, or delete stops.
If at any point you deviate from the route,
the system will quickly and automatically
recalculate a new route and immediately give
new guidance instructions.
While routing, if you have to stop and turn
off the vehicle, and you come back and turn on the vehicle, the route will continue to be
present on the screen.
Press END or use voice commands ("Alexa,
cancel navigation") to end navigation.
The Lucid navigation system will periodically
check that predicted charge on arrival is
still correct. It checks everytime you finish
charging, everytime you reach a low state
of charge, and every fifteen minutes while
routing. If the EV routing conditions have
significantly changed and the route needs to
be refreshed, a notification will appear and
will ask you to agree to a new route.
If for some reason the EV route requires
charging, but a fast charger could not be
automatically added along the route, then
an Insufficient Charge notification will be
shown inside navigation. In this case, we
recommend that you manually search for charging. Usually, slow chargers can be found
along the route and can be used.
Note: When Routing starts, a Mute button will
appear on the top navigation screen, which
enables you to turn off the audio guidance.
Adjusting the Map
The maps on either the ICR and CID
screen can be individually rotated, panned,
or zoomed in and out via the touchscreen.
Any time the map is manipulated beyond your vehicle

To zoom in the map, use one finger to double
tap the touchscreen. To zoom out the map,
use two fingers to tap the touchscreen. To see
a 3D view of the map, swipe two fingers on the
touchscreen.
The map centers around your current location
by default, and the current street name is
displayed.
The Pilot Panel and Cockpit Panel can
maintain their own independent map setting
and zoom level while routing or not routing.
Touch the icon in the lower right of the map to
change default views:
-Range Map: Shows the approximate
range that can be traveled using your
current level of charge
- 3D Track-Up: 3D view that tracks your
vehicle

Map Updates and Offline Mode
When a data connection is present, the "self-
healing maps" are updated automatically over
the air with no user intervention as they
become available.
When your vehicle does not have an available
wireless internet connection, the navigation
system will pull from any existing map
data that was automatically downloaded
and stored by the vehicle based on
driving and search history. Any resulting
information displayed will be labeled as
OFFLINE RESULTS, and will not include live
traffic conditions, EV-style routing, charge
plug availability.
Infotainment133

4. Under MY DEVICES, tap the name of thedevice to be connected.
Alternately, you can use the right Cockpit Panel. Press the
icon in the status bar
to display connected devices and connect or
disconnect.
Editing Bluetooth Enabled Device Preferences
To edit device preferences:
1. On the Pilot Panel Bluetooth screen, press the three dots by a connected
device.
2. From this screen, select to allow your vehicle to access the phone, audio,
or both features. Press SAVE to keep
these settings and return to the previous
screen.
If you no longer wish to use a device with the
vehicle:
1. On the Pilot Panel Bluetooth screen, press Forget.
2. Press the FORGET button next to any device you wish to remove, then pressFORGET at the prompt to confirm.
3. Press Done when you have finished
unpairing any unwanted devices.
Using the Phone App
WARNING: Distracted driving can
lead to loss of vehicle control and
a collision, which can result in
serious injury or death. Lucid strongly
recommends that the driver stay
focused on the road at all times while
driving. Safe operation of the vehicle
is the driver

-If you take the call from your iPhone, the
call audio will depend on iPhone “Call
Audio Routing” setting.
Press an option on the touchscreen or use
the steering wheel controls to DECLINE or
ACCEPT the call.
Note: Your phone may prompt you to select
the audio output for the call, depending on
the type of phone and last output used.
The "Call Audio Routing" Setting on iPhone The "Call Audio Routing" setting can be
configured in one of three ways:
- Automatic - The iPhone routes the audio
to the phone even though the phone is connected to the car via Bluetooth.
- Bluetooth Handset - The iPhone routes
the audio to the car when the phone is
connected to the car via Bluetooth.
- Speaker - The iPhone routes the audio
to the phone speaker even though the
phone is connected to the car via
Bluetooth.
In-Call Options
Active calls are displayed on the right Cockpit Panel.
-The
active call icon will be
displayed in the status bar when a call
is in progress.
- Contact information and call length will
be displayed in the main screen, along
with call control buttons.
If a call is placed on hold and a second call is
made, the call control buttons change.
-Press Swap to switch between the active
call and the call on hold.
- Press Merge to bring both callers into a
shared call.
Call volume and the mute option can be
controlled with the physical controls in your vehicle. See Physical Media Controls on page
123.
Using MessagesWARNING: Distracted driving can
lead to loss of vehicle control and
a collision, which can result in
serious injury or death. Lucid strongly
recommends that the driver stay
focused on the road at all times while
driving. Safe operation of the vehicle
is the driver

Schedule an update
On the software update screen, press
SCHEDULE TIME if you wish to start the
update later. Updates can be scheduled up to 48 hours later.
1. Read the cautionary statement and press CONFIRM to consent to the
update.
2. Select the time to start on the screen provided and press SET TIME to save.
3. Your scheduled date and time will be displayed on the main software update
screen, and can be edited by pressing
the
icon beside it. Ensure that all
update prerequisites will be met at the scheduled time.
30 minutes before a scheduled update, you
will receive a notification on the right Cockpit
Panel, with options to DELAY AN HOUR or CANCEL SCHEDULE.
Install an update now
On the software update screen, press
INSTALL NOW to proceed with the update.
1. Read the cautionary statement and press CONFIRM to consent to the
update.
2. The system will perform a series of checks to ensure all prerequisites havebeen met.
3. A 2-minute countdown will display. Exit and lock the doors at this time. See
Doors on page 20.
4. During the update, the Pilot Panel and left Cockpit Panel screens will be blank.
The Cockpit Panel indicates the update
is proceeding. The progress can be
viewed on the right Cockpit Panel and
within the Lucid mobile app.
5. When the update is complete, a notification will appear on the left Pilot
Panel and a push notification will be
sent to the Lucid mobile app.
Note: If an update fails to install, a notification
will display on the Infotainment screens and a
push notification is sent to the Lucid mobile
app.
- If a failure was due to a prerequisite
not being met (e.g., battery was at less
than 20% or vehicle was not put in Park),
resolve the issue and press TRY AGAIN.
- If a failure was due to another reason,
contact a Lucid Service Center for
assistance.
Viewing Release Notes
Lucid strongly recommends that all users read
the release notes for every software update.
They can contain important information about
your vehicle, including safety information or
new operating instructions.
Release notes can be viewed before and after
a software update:
-On the Pilot Panel, select
>
About Vehicle. The software
versions for the current installation and any available updates will be listed.
Press Learn More next to a version to
read the notes for it.
- When an update has installed
successfully, press Learn More on the
prompt that appears on the right
Cockpit Panel.
Infotainment143