homelink LUCID AIR 2023 Owners Manual

HomeLink
What is HomeLink?
HomeLink is a wireless control system that
enables you to remotely operate up to
15 Radio Frequency (RF) devices, such as
garage doors, gates, lights, and home security systems.
Additional system information can be found
online at www.homelink.com .
HomeLink FCC/ISED Advisory
FCC (USA) and ISED (Canada)
This device complies with FCC rules part
15 and Innovation, Science, and Economic
Development Canada RSS-210. Operation is subject to the following two conditions:
(1) This device may not cause harmful
interference, and (2) This device must
accept any interference that may be
received including interference that may
cause undesired operation. WARNING: The
transmitter has been tested and complies
with FCC and ISED rules. Changes or
modifications not expressly approved by the
party responsible for compliance could void
the user

To set up a new HomeLink program, have theremote for the garage door or gate you are
programming ready, and follow these steps:
1. On the Pilot Panel, select
>
Connectivity > HomeLink, then
press + ADD NEW HOMELINK.
Note: Press CANCEL during any step
of programming to return to the main
HomeLink

From this menu, you can:-Press + ADD NEW HOMELINK to
add a new device. See Programming
HomeLink .
- Press HOMELINK SETTINGS to edit or
remove existing devices. See Renaming
or Deleting a Device .
- Press a device name to activate it.
The
icon next to a device indicates that a
signal has been sent to the door or gate. The
menu automatically collapses 3 seconds after
a signal is sent.
Renaming or Deleting a Program
Note: For your security, it is recommended to
delete all programmed devices upon the sale or lease termination of your vehicle.
Renaming a program 1. On the Pilot Panel, select
>
Connectivity > HomeLink, then
select the device to be renamed.
2. On the device details screen, press the
edit icon.
3. Use the on-screen keyboard to edit the device name, then press SAVE to
confirm, or CANCEL to return to the
previous screen.
Deleting a program 1. On the Pilot Panel, select
>
Connectivity > HomeLink, then
select the device to be removed.
2. On the device details screen, press DELETE.
3. The screen will prompt to confirm
whether you wish to delete the selected
device. Press DELETE ALL to confirm,
or CANCEL to return to the previous
screen.
Deleting all programs 1. On the Pilot Panel, select
>
Connectivity > HomeLink.
2. If two or more devices are connected to your vehicle, the option to DELETE ALL
will be available. Press it to continue.
3. The screen will prompt to confirm
whether you wish to delete all
connected HomeLink