seat adjustment MAZDA CX9 2023 User Guide

Second-row Seat (Captain Seat Type)
Armrest type with angle adjustment
function (center walk-through)Second-row seat console type
▼Seat Operation
Seat Slide (Forward-back adjustment)
To move a seat forward or backward, raise the lever and slide the seat to the desired position
and release the lever.
Essential Safety Equipment
Seats
2-22
CX-9_8LJ2-EA-22H_Edition1_old 2022-6-9 13:33:08

Make sure the lever returns to its original position and the seat is locked in place by
attempting to push it forward and backward.
Seat Recline
To change the seatback angle, lean forward slightly while raisi ng the lever. Then lean back
to the desired position and release the lever.
The lever can also be used when flattening down the seats.
Refer to How to Split Folding th e Second-row Seats on page 2-25 .
Make sure the lever returns to i ts original position and the seatback is locked in place by
attempting to push it forward and backward.
Third-row Seat Access
To access to the third-row seats , pull up the lever on the side of the head restraint to fold the
seatback and slide the seat forward.
Refer to How to Third-ro w Seat Access on page 2-24.
Make sure the lever returns to i ts original position and the seatback is locked in place by
attempting to push it forward and backward.
▼ Armrest
Using the armrest
The armrest on the side of the second-row
seatback can be used or placed upright.
Adjusting the angle
The angle of the armrest can be adjusted
according to the angle of the seatback.
To adjust the angle, lower the armrest to
the lowest position, pull it up to the
desired position, and then lock it. To
adjust the angle again, store the armrest
once and then lower the armrest to the
lowest position again.
After adjustment, m
ake sure that the
armrest is securely locked by lightly
pressing it down.

WA R N I N G
Never position the shoulder portion of a
seat belt over the armrest:
Positioning the shoulder portion of a
second-row seat belt over the armrest is
dangerous as it cannot provide adequate
protection in a collision and could result in
serious injuries.
Essential Safety Equipment
Seats
2-23
CX-9_8LJ2-EA-22H_Edition1_old 2022-6-9 13:33:08

Never put your hands and fingers around
the moving parts of the seat and armrest:
Putting your hands and fingers around the
moving parts of the seat and armrest is
dangerous as they could get injured.
CAUTION
Be careful not to apply excessive force to
the armrest such as by sitting on it.
Otherwise, it could be deformed or
damaged.
▼Third-row Seat Access
Occupants can get into and out of the
third-row seats easily by sliding the
second-row seats forward.
WA R N I N G
Make sure there is nobody in the
second-row seat area before operating the
levers:
Not checking the second-row seat area for
persons before folding the seatbacks with
the levers is dangerous. The second-row
seat area is difficult to see from the rear of
the vehicle. Operating the levers without
checking could cause injury to a person
when a seatback suddenly flips forward.
CAUTION
Before moving the second-row seat, make
sure that the head restraint is at the lowest
position. If the second-row seat is folded
forward while the head restraint is pulled
up, there will not be enough space for
getting in or out of the vehicle which could
cause an occupant to trip and fall resulting
in injury.
NOTE
Occupants can also get in and out of the
third-row seat area by passing between the
second-row seats with the armrest type
having the angle adjustment function.
Occupants can pass through easily by
tilting the armrest forward.
Entering/exiting the third-row seat area
1. Lower the head restraint all the way
down.
Refer to Head Restraints on page
2-28.
2. Pull up the lever on the side of the head restraint to unlock the seat, fold
the seatback forward, and slide the seat
forward.
Essential Safety Equipment
Seats
2-24
CX-9_8LJ2-EA-22H_Edition1_old 2022-6-9 13:33:08

NOTE
The seats cannot be flattened down while
the second-row seats are unlocked even if
the lever on the side of the head restraint
is operated and the reclining lever is
operated. Before folding down the
second-row seats, move the seatback
forward once, slide the seat rearward, and
lock the seat.
Folding the seatbacks
1. Lower the head restraint all the way
down.
Refer to Head Restraints on page
2-28.
2. (Armrest type with angle adjustment
function)
If the armrests are down, fold them
back up.
3. Raise the lever on the side of the second-row seat to fold down the
seatback.
To return the seatba ck to its upright
position
Press the seatback rearward and lock it in
place. After returning the seatback to its
upright position, mak e sure it is securely
locked.
Third-row Seat
▼ Split folding the Third-row Seats
To create a luggage compartment space,
fold the third-r
ow seats forward.
CAUTION
Do not apply load to the head restraint
with it in the upright position and the
seatback folded down. Otherwise, it could
cause damage to the head restraint.
NOTE
When folding the seatbacks forward, fold
them in two steps.
Folding the seatbacks (With strap)
1. Secure the third-row seat seat belts into
their holders.
Refer to Unfastening the Seat Belt on
page 2-38.
2. Slide the second-row seat all the way forward.
3. Pull the strap to fold down the head restraint.

Essential Safety Equipment
Seats
2-26
CX-9_8LJ2-EA-22H_Edition1_old 2022-6-9 13:33:08

Head Restraints
Your vehicle is equipped with head
restraints on all outboard seats and the
second-row center seat. The head
restraints are intended to help protect you
and the passengers from neck injury.
WA R N I N G
Always drive with the head restraints
installed when seats are being used and
make sure they are properly adjusted. In
addition, always raise the head restraints
on all second-row seats when they are
being used:
Driving with the head restraints adjusted
too low or removed is dangerous. With no
support behind your head, your neck could
be seriously injured in a collision.
NOTE
(Third-row seat)
The head restraints are non-adjustable.
▼ Height Adjustment
Adjust the head restra
int so that the center
is even with the top of the passenger's
ears.

To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the
stop-catch release, then push the head
restraint down.
Front outboard seat

Second-row outboard seat
(6:4 Split Adjustable-type Bench Seat
Ty p e )
(Captain Seat Type)

Essential Safety Equipment
Seats
2-28
CX-9_8LJ2-EA-22H_Edition1_old 2022-6-9 13:33:08

2. If the power window lock switch is inthe unlock position, switch it to the
lock position.
3. Press and hold the front passenger's power window switch and rear left/
right power window switches on the
driver's door at t he same time for 3
seconds or longer.
NOTE
The automatic folding function cannot
be canceled if the procedure is not
completed within the specified times, or
the procedure is changed along the way.
To redo the procedure, first switch the
ignition off and proceed from the
beginning.
If you are unable to cancel the function
despite doing the cancellation
procedure, consult an Authorized Mazda
Dealer.
Restoring the au tomatic folding
function
With the automatic folding function in the
canceled state, repeat the previous
procedure for canceling the function and it
will be restored.
NOTE
If you are unable to restore the function
despite carrying out the restore procedure,
consult an Authorized Mazda Dealer.
Engine-off outside mirror operation
*
The outside mirrors can be operated for
about 40 seconds after the ignition is
switched from ON to off.
▼ Rearview Mirror
WA R N I N G
Do not stack cargo or objects higher than
the seatbacks:
Cargo stacked higher than the seatbacks is
dangerous. It can block your view in the
rearview mirror, which might cause you to
hit another car when changing lanes.
Rearview mirror adjustment
Before driving, adjust the rearview mirror
to center on the scene through the rear
window.

NOTE
For the manual day/night mirror, perform
the adjustment with the day/night lever in
the day position.
Before Driving
Mirrors
3-34*Some models.
CX-9_8LJ2-EA-22H_Edition1_old
2022-6-9 13:33:08

Index
Parking Sensor System (Mazda Connect
(Type B))......................................... 4-287
Power Liftgate................................... 3-20
Power Liftgate Warning Beep........... 7-49
Power Steering................................ 4-115
Power Steering Warning Buzzer....... 7-50
Power Windows................................ 3-37
R
Radar Sensors (Rear)...................... 4-247
Radar Sensor (Front).......................4-244
Rearview Mirror................................3-34
Rear Coat Hooks............................... 5-76
Rear Cross Traffic Alert (RCTA).... 4-141
Rear Door Child Safety Locks.......... 3-18
Rear View Monitor Picture quality adjustment......... 4-267
Rear View Monitor (Mazda Connect
(Type A))......................................... 4-260 Displayable range on the
screen......................................... 4-262
Picture quality adjustmen.......... 4-267
Rear view monitor operation..... 4-263
Rear view parking camera
location...................................... 4-261
Switching to the rear view monitor
display........................................4-261
Variance between actual road
conditions and displayed
image......................................... 4-265
Viewing the display................... 4-263
Rear View Monitor (Mazda Connect
(Type B))......................................... 4-268 Displayable range on the
screen......................................... 4-270
Rear view monitor operation..... 4-271
Rear view parking camera
location...................................... 4-269
Switching to the rear view monitor
display........................................4-269
Variance between actual road
conditions and displayed
image......................................... 4-274
Viewing the display................... 4-271
Rear Window Defogger.................... 4-83
Rear Window Washer... .................... 4-82
Rear Window Wiper......................... 4-82
Recommended Oil.............................6-20
Recording of Vehicle Data................ 8-22
Recreational Towing......................... 3-63
Registering Your Vehicle in A Foreign
Country.............................................. 8-18
Replacement
Fuse..............................................6-48
Key battery.................................. 6-33
Light bulbs...................................6-40
Tires............................................. 6-37
Wheel........................................... 6-39
Wiper........................................... 6-25
Request Switch Inoperable Warning
Beep (With the advanced keyless
function)............................................ 7-49
Rocking the Vehicle.......................... 3-49
S
Safety Defects, Reporting................. 8-14
Saving Fuel and Protection of the
Environment...................................... 3-47
Scheduled Maintenance...................... 6-4
Seat Driving position memory............ 2-10
Seats.................................................... 2-5 Front seat....................................... 2-5
Head restraint.............................. 2-28
Seat ventilation............................ 2-33
Seat warmer................................. 2-31
Second-row seat.......................... 2-15
Second-Row Seat (Captain Seat
Type)............................................ 2-22
Third-row seat............................. 2-26
10-8
CX-9_8LJ2-EA-22H_Edition1_old 2022-6-9 13:33:08