Charge mode MAZDA CX90 2024 User Guide

How to Use the FullyAutomatic Climate Control
1. Start the hybrid system.
2.
The AUTO switch indicator light
turns on.
3. Press the temperature setting switch to set the desired temperature.
Each function is automatically
controlled according to the set
temperature.
4. To stop the operation, press the climate control system power
switch.
NOTE
The recommended set temperature
is 22 °C (72 °F).
If any mode selector switch, fan
control switch, or windshield
defroster switch is operated during
auto operation, the AUTO switch
indicator light turns off. The
functions for switches other than
those operated will continue to
operate in auto control.
The power consumption of the air
conditioner changes depending on
the set temperature and the ambient
temperature. If the set temperature is
too low or high, the remaining
distance-to-full discharge shortens.
The climate control system can be
used while charging when the
vehicle power is switched ON.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Front)
6-7
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the Mazda Connect

Information
Drive Efficiency Monitor:
Monitor vehicle efficiency history and system status in real time.
High Voltage Battery Monitor
:
View high voltage battery charge level, charging schedule, and more.
SiriusXM Travel Link
*:
Access traffic information, weather, pa rking information and sports scores.
Vehicle Status Monitor
:
View important vehicle maintenance messages, information, and intervals.

Entertainment
FM
AM
SiriusXM
*
Pa n d o ra*
Bluetooth
USB1 Audio/USB2 Audio
USB1 Video/USB2 Video
Phone Connectivity/Apple CarPlay/Android Auto
Audio Off

Notifications
Displays text messages received by the mobile device paired to Mazda Connect and
notifications from the vehicle.

Communication
By connecting your mobile device, such as a Smartphone, to Mazda Connect via
Bluetooth®, you can use the hands-free call and short message functions.

Other Equipment
Mazda Connect
7-6*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the VanityMirrors
1. Vanity mirror light*
2. Lighting range
3. Off range
For vehicles with a light, it turns on
when the cover is opened.
The light turns on only when the
sunvisor angle is within the lighting
range.
NOTE
If a vanity mirror light is left on with
the vehicle power switched OFF, the
light is turned off automatically to
prevent the lead-acid battery from
being discharged.
The vanity mirror light can be turned
on again by doing any of the
following operations:
Opening/closing any door.Unlocking any door.Switching the vehicle power to
ACC or ON.
Switching an overhead light/front
map light on.
Other Equipment
Va n i t y M i r r o r
7-40*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

When using the Wireless Charger
(Qi) to store items on, turn off the
Wireless Charger (Qi).
 Do not place any metal object
between the charging area and the
mobile device. Also, do not apply
items such as a metallic sticker to the
Wireless Charger (Qi).
 When charging, do not place any
item other than the mobile device to
be charged on the Wireless Charger
(Qi). In addition, do not place any
metal object, IC card, coin, or
magnetic item near the charging
area.
 Remove dust or dirt from the
charging area before use.
 Do not apply strong force or impact
to the Wireless Charger (Qi) or get it
wet.
 Use only mobile devices which
support the Wireless Charger (Qi).
CAUTION
While a mobile device is placed on
the charging area, keep the vehicle
key away from the Wireless Charger
(Qi). The vehicle key may not be
detected due to radio wave
interference by the Wireless Charger
(Qi).
 Charging may not operate normally
under the following conditions:
 The mobile device is fully charged.
 There is foreign matter between
the mobile device and the charging
area.
 The temperature of the mobile
device is high.
 The mobile device is placed with
the charging side facing upward.
 The mobile device is placed in a
position extremely deviating from
the center of the charging area.
Your vehicle is in an area where
strong radio waves or electrical
noise occur such as near a
television tower, power plant, or
airport.
 The Near Field Communication
(NFC) function setting of the
mobile device is on (depends on
the model of the mobile device).
 Keep the following items away from
the charging area. Otherwise the
data stored on the mobile device
could be erased or the device could
malfunction.
 Magnetic items such as magnets,
magnetic cards, and magnetic
recording media.
 High precision devices such as
wristwatches.
 Before using the Wireless Charger
(Qi), make sure to back up the data
stored on the mobile device. The
data on the mobile device could be
deleted.
 Do not wipe the Wireless Charger
(Qi) using oil, alcohol, or thinner, or
spray hairspray or insecticide onto it.
Otherwise, it could cause damage or
cracking.
 Do not leave mobile devices in the
cabin. The temperature inside the
cabin may become very hot, causing
the devices to malfunction.
Other Equipment
Wireless Charger (Qi)
7-55
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

NOTE
Charging efficiency may be reduced
or charging may not be possible
depending on the use environment
and conditions.
Depending on the mobile device
case or accessories used, the mobile
device may not charge, or the
charging efficiency may be reduced
resulting in a longer charging time. If
charging does not start even when a
mobile device is placed on the
charging area, remove the case or
accessory.
Depending on the vehicle condition,
charge amount may be temporarily
restricted and charging may be
canceled, however, this does not
indicate a problem.
If the mobile device temperature
rises during charging, charging may
stop due to the protection function
of the device. If that happens, wait
until the mobile device cools down
sufficiently and then recharge it.
When using the Wireless Charger
(Qi), applications using the Near
Field Communicatio
n (NFC) function
may launch, however, this does not
indicate a problem with the Wireless
Charger (Qi).
While i-stop is operating, charge
amount may be temporarily
restricted and charging may be
temporarily canceled, however, this
does not indicate a problem.
Charging may be temporarily
canceled depending on the vehicle
conditions, such as when the engine
is stopped.
Convenient Ways to Use
the Wireless Charger (Qi)
The Wireless Charger (Qi) can be
turned on/off and the connection
mode can be switched.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Other Equipment
Wireless Charger (Qi)
7-57
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Door-Ajar WarningSound
A warning sound is activated if the
vehicle is driven with any door or
liftgate ajar. Drive the vehicle after
closing the doors and liftgate.
Battery Saving ModeWarning Sound
A warning sound is activated when the
vehicle goes into Battery Saving Mode.
To charge the lead-acid battery, start
the hybrid system and operate it for 5
minutes or longer.
What to Do in Case of Emergency
Warning Sound is Activated
8-63
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Charge System
ItemServicing data
Input power 110 - 240 V AC
Rated frequency 60 Hz
Maximum rated electrical current In normal charge
32A AC
Maximum power consumption 7.2 kVA (normal charge)
Electrical leakage detection current
for control box including genuine
charge cable 5 mA
EV charge mode/Connection type Normal charge: Mode 2, Mode 3/TYPE1
Installation requirements
(information on protection against
short-circuit current and equipment
protection) Applicable laws and regulations, and standards must be followed
for protection measures against over-current and over-voltage.
Always make sure to install a ppropriate over-current protection
devices to the wiring of houses and buildings.
IP level IP44: When charge connector is connected to charge inlet
IP67 : Charging Cable
Operating temperature On Board Charger
Ambient temperature : －30 °C ( －22 °F) to 85 °C (185 °F)
coolant temperature : －30 °C ( －22 °F) to 70 °C (158 °F)
Charging Cable
Ambient temperature : －30 °C ( －22 °F) to 55 °C (131 °F)
Storage temperature On Board Charger
Ambient temperature : －40 °C ( －40 °F) to 85 °C (185 °F)
coolant temperature : －40 °C ( －40 °F) to 85 °C (185 °F)
Charging Cable
Ambient temperature : －40 °C ( －40 °F) to 80 °C (176 °F)
Applicable standards On Board Charger
EN/IEC 61851-1, EN/IEC 61851-21, EN/IEC 61851-23, UL 2202
Charging Cable
NFPA 70, NFPA 79, SAE-J 1772, UL 62, UL 817, UL 2231-1, UL
2231-2, UL 2251, UL 2594, CSA C22.2 No.280-16
Adapters Do not use an adapter with the plug and connector of the charg-
ing cable.
Do not use an extension cable.
Specifications/Customer Information and Reporting Safety Defects
Ve h i c l e Specification
10-63
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04