door lock MAZDA CX90 2024 Owner's Manual

Be careful not to pinch your hand
when closing the liftgate. It may
result in an injury if your hand is
caught.
1. Damper stay
 Do not modify or replace the liftgate
damper stay. Consult an Authorized
Mazda Dealer if a liftgate damper
stay is deformed or damaged for
reasons such as a collision or if there
is some other problem.
How to Use the Liftgate
Opening the Liftgate
1. Unlock the door.
2. Press the electric liftgate opener.
3. Lift the liftgate.
NOTE
(Vehicles with advanced keyless
function)
The liftgate can be opened even while
the doors and the liftgate are locked by
pressing the electric liftgate opener
while carrying the key.
Closing the Liftgate
1. Lower the liftgate slowly using the
liftgate recess.
2. Press down the liftgate to close.
Opening/closing
Liftgate
4-18
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Opening/closing using the liftgate
open/close switch () on the key
Press the liftgate open/close switch on
the key for 1 second or longer when all
of the following conditions are met.
The vehicle power is switched OFF.The vehicle is stopped.
Opening/closing the liftgate using the
power liftgate switch
Press the power liftgate switch for 1
second or longer when all of the
following conditions are met.
The vehicle is stopped.The vehicle power is switched to a
position other than ON, or the
selector lever is in the P position with
the vehicle power switched ON
All the doors are unlocked (when
opening)
Opening the liftgate using the electric
liftgate opener
Press the electric liftgate opener when
all of the following conditions are met.
The vehicle power is switched to a
position other than ON, or the
selector lever is in the P position with
the vehicle power switched ON
All the doors are unlocked.
NOTE
The liftgate can be opened even while
the doors are locked by pressing the
electric liftgate opener while carrying
the key.
Closing the liftgate using the power
liftgate close switch
Press the power liftgate close switch
when all of the following conditions
are met.
The vehicle power is switched to a
position other than ON, or the
selector lever is in the P position with
the vehicle power switched ON
Closing using the door-lock switch on
the liftgate*
Press the door-lock switch on the
liftgate when all of the following
conditions are met.
You are carrying the key.The vehicle power is switched OFF.All the doors are closed.
Opening/closing
Liftgate
4-22*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

The liftgate is not automatically
opening/closing.
The doors, liftgate, and the fuel-filler
lid/charging port lid are locked, the
hazard warning lights operate 1 time.
Then, the liftgate fully closes
automatically.
Opening/closing using the hands-free
function*
Do the kicking motion with all of the
following conditions met while the
vehicle is stopped.
You are carrying the key.The hands-free function is on.The vehicle power is switched to a
position other than ON, or the
selector lever is in P with the vehicle
power switched ON.
A : About 30―50 cm (12―19.7 in)
B : About 10 cm (3.9 in)

When the kicking motion is done
correctly, the hazard warning lights
flash 2 times, a beep sound is
activated, and the liftgate opens/
closes automatically. Be careful not to
contact the liftgate.
Move your foot away from under the
bumper within about 1 second after
moving it under the bumper.
If the kicking motion is done while the
liftgate is opening/closing
automatically, the liftgate will stop. If
the kicking motion is done again, the
liftgate moves in the direction opposite
to the direction it was moving before it
stopped.
CAUTION
Do not do the kicking motion while
wearing footwear which exposes the
feet, such as sandals. If your foot
contacts the hot exhaust pipe, it
could cause serious burns.
 Do not do the kicking motion while
the area where you are standing is
unstable such as a slope or icy road.
Otherwise, you could fall down,
resulting in injury.
NOTE
The hands-free sensor detects in a
range of about 30 cm on both the
left and right sides from the center of
the rear bumper.
The hands-free sensor may not
operate normally under the following
conditions.
Opening/closing
Liftgate
*Some models.4-23
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Your foot remains placed within
the detection area.
You move your foot left and right
within the detection area.
The kicking motion is too fast or
too slow.
Your foot contacts the rear bumper
when doing the kicking motion.
You are wearing shoes such as
rubber boots which do not
conduct electricity well.
There is equipment emitting strong
radio waves near the vehicle.
The detection area of the
hands-free sensor is dirty.
When the detection area of the
hands-free sensor is dirty, wipe it off
with a clean cloth. Before cleaning
the sensor, place the key outside of
its operation range or turn off the
hands-free function using Mazda
Connect.
If the operation using the hands-free
sensor is not possible even though
the operation conditions are met,
consult an Authorized Mazda Dealer.
Hands-free function ON/OFF
switching
The hands-free function can be
switched on/off.
Refer to Mazda Connect Owner's
Manual or consult an Authorized
Mazda Dealer.
To prevent an unintended operation,
turn off the function.
Stopping the liftgate
If any of the following operations is
done, the automatic opening and
closing of the liftgate stops.
The liftgate open/close switch on the
key is pressed.
The power liftgate switch is pressed.The electric liftgate opener is
pressed.
The power liftgate close switch is
pressed.
The door-lock switch on the liftgate
is pressed.
The kicking motion is done.
NOTE
The liftgate cannot be stopped when it
is half open or lower. It moves in the
close direction by the load weight of
the liftgate itself.
The automatic opening/closing of the
liftgate can be stopped using the
kicking motion even if you do not have
the key.
Moving the liftgate again
If any of the following operations is
done, the liftgate moves in the
direction opposite to the direction it
was moving before it stopped.
The liftgate open/close switch on the
key is pressed for 1 second or longer.
The power liftgate switch is pressed
for about 1 second or longer.
The electric liftgate opener is
pressed.
The power liftgate close switch is
pressed.
When the door-lock switch on the
liftgate is pressed, the liftgate
automatically fully closes.
Opening/closing
Liftgate
4-24
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the PowerWindows
Opening/Closing the Windows
1. Switch the vehicle power ON.
2. Operate the power window switch.To fully open the window
automatically, press the power
window switch all the way down
and then release it.
To fully close the window
automatically, pull the power
window switch all the way up and
then release it.
Driver's Seat
Front passenger/rear passenger seat
1. Close
2. Open
3. Front passenger's window
4. Right rear window
5. Left rear window
6. Driver's window
Locking the Front Passenger/Rear Seat
Windows
Switch the power window lock switch
on the driver's door to the lock
position.
The driver’s switch can be operated,
however, the front passenger/rear
passenger switches are no longer
operable.
Press the power window lock switch
again to the unlock position to cancel
it.
1. Power window lock switch
2. Lock position
3. Unlock position
Opening/closing
Windows
4-29
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Convenient Ways to Usethe Power Windows
Operation Function After Vehicle
power is Switched OFF
All the windows can be opened and
closed for approximately 40 seconds
after the vehicle power is switched to
ACC or OFF with all doors closed. If
any door is opened, the power
window will stop operating.
Remote Power Window Operation
All power windows can be opened
from outside the vehicle after the
doors are closed.
The power windows can be operated
remotely when the power window lock
button on the driver's door is in the
lock or unlocked position.
Remote power window operation is
activated under the following
conditions.
All the doors and liftgate are closed.The vehicle power is switched OFF.
NOTE
The power windows cannot be
opened from the outside of the vehicle
if the power window initialization has
not been completed.
Opening
The windows can be opened for
ventilating the cabin before getting in
the vehicle.
Press the unlock button on the key
quickly and briefly 3 times and then
immediately afterwards, press and
hold the unlock button to open the
windows.
To stop the windows from opening ,
release the button. If the operation is
performed from the beginning again,
the windows open.
Opening/closing
Windows
4-30
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Theft-Deterrent System
If the theft-deterrent system detects an
inappropriate entry into the vehicle,
which could result in the vehicle or its
contents being stolen, the alarm alerts
the surrounding area of an abnormality
by sounding the horn and flashing the
hazard warning lights.

The system will not function unless it's
properly armed. So when you leave the
vehicle, follow the arming procedure
correctly.
How to Use the
Theft-Deterrent System
How to Arm the System
1. Close the windows and the
panorama sunroof/moonroof*
securely.
2. Switch the vehicle power OFF.
3. Make sure the hood, the doors, and the liftgate are closed.
4. Press the lock button on the transmitter. The hazard warning
lights will flash once.
The following method will also arm
the theft-deterrent system:
Press the door-lock switch
while
any door is open and then close all
of the doors.
( With the advanced keyless
function)
Touch the sensing area of the door
lock touch sensor.
The security indicator light
in
the instrument cluster flashes twice
per second for 20 seconds.
5. After 20 seconds, the system is fully armed.
NOTE
The theft-deterrent system can also
be armed by activating the auto
relock function with all the doors,
the liftgate and the hood closed.
Refer to Transmitter on page 4-5.
The system will disarm if one of the
following operations takes place
within 20 seconds after pressing the
lock button:
Unlocking any door.Opening any door.Opening the hood.Switching the vehicle power ON.
To rearm the system, do the arming
procedure again.
Opening/closing
Security System
4-40*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

When the doors are locked by
pressing the lock button on the
transmitter while the theft-deterrent
system is armed, the hazard warning
lights will flash once to indicate that
the system is armed.
Operation
Horn triggering conditions
The horn sounds intermittently and the
hazard warning lights flash for about
30 seconds when the system is
triggered by any one of the following:
Unlocking a door with the auxiliary
key, door lock switch, or an inside
door-lock knob.
Forcing open a door, the hood or the
liftgate.
Opening the hood by operating the
hood release handle.
Switching the vehicle power ON
without using the power switch.
If the system is triggered again, the
lights and horn will activate until the
driver's door or the liftgate is unlocked
with the transmitter.
(With the advanced keyless function)
The lights and horn can also be
deactivated by touching the sensing
area of the door release touch sensor.
NOTE
The liftgate does not open while the
theft-deterrent system is operating.
If the lead-acid battery goes dead
while the theft-deterrent system is
armed, the horn will activate and the
hazard warning lights will flash when
the lead-acid battery is charged or
replaced.
To S t o p t h e A l a r m
A triggered alarm can be turned off
using any one of the following
methods:
Pressing the unlock button on the
transmitter.
Starting the hybrid system with the
power switch.
(With the advanced keyless
function)
Touching the sensing area of the
door release touch sensor.
Pressing the electric liftgate opener
while the key is being carried.
The hazard warning lights will flash
twice.
To Turn Off an Armed System
An armed system can be turned off
using any one of the following
methods:
Pressing the unlock button on the
transmitter.
Starting the hybrid system with the
power switch.
(With the advanced keyless
function)
Touching the sensing area of the
door release touch sensor.
The hazard warning lights will flash
twice.
NOTE
When the doors are unlocked by
pressing the unlock button on the
transmitter while the theft-deterrent
system is turned off, the hazard
warning lights will flash twice to
indicate that the system is turned off.
Opening/closing
Security System
4-41
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Warnings and Cautionsfor Using the Mirrors
WARNING
Be sure to look over your shoulder
before changing lanes.
Changing lanes without taking into
account the actual distance of a vehicle
in the convex mirror is dangerous. You
could have a serious accident. What
you see in the convex mirror is closer
than it appears.
Always return the outside mirrors to
the driving position before you start
driving.
Driving with the outside mirrors folded
in is dangerous. Your rear view will be
restricted, which could lead to an
unexpected accident.

(Vehicles with electric retractable
mirrors)
Do not touch the outside mirrors
while they are folding in and out.
Touching an outside mirror while it is
folding in or out is dangerous. Your
hands could get caught which could
cause an injury or the door mirror
could be damaged.
Use the switch to set the outside
mirrors.
Setting the outside mirrors manually is
dangerous. The outside mirrors will not
lock into place, which could obstruct
visibility.
Always operate the electric retractable
mirrors with the vehicle parked in a
safe place.
Operating the electric retractable
mirrors while driving is dangerous.
Wind pressure could damage the
outside mirrors, making it impossible
to return them to the driving position
and to see behind you.
Do not adjust the outside mirrors
while driving the vehicle.
Adjusting the outside mirrors while
driving the vehicle is dangerous as
doing so could distract your attention
from the road ahead and lead to an
accident.
CAUTION
(Vehicles with electric retractable
mirrors)
Operate the folding switch to fold in or
out the outside mirrors. If you unfold
the outside mirrors manually, they will
not be in a secured position and you
will be unable to check the view to the
rear of the vehicle.
Driving
Mirrors
5-8
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Convenient Ways to Usethe Outside Mirrors
Driving Position Memory*
The angle of the outside mirrors can be
programmed to the Driving Position
Memory.
Refer to Driving Position Memory on
page 3-33.
Auto fold function
*
When locking/unlocking the doors
while the vehicle power is switched
OFF, the outside mirrors automatically
fold in and out.
When the outside mirrors are folded in
and the vehicle power is switched ON,
or the hybrid system is started, the
outside mirrors fold out automatically.
Turn the auto fold function on using
the center display.
Refer to Settings section in the Mazda
Connect Owner's Manual or consult
an Authorized Mazda Dealer.
Operation function after hybrid
system is stopped
The angle of the outside mirrors can be
adjusted and they can be folded in and
out for about 40 seconds after the
vehicle power is switched from ON to
OFF.
Auto tilt-down outside mirror
function for reversing *
The outside mirrors can be set to tilt
downwards automatically when
reversing the vehicle. When the vehicle
is finished reversing , the outside
mirrors return to their original angle.
1. Press the select switch on the side of the door mirror to be tilted
down.
Turn on the indicator light of the
select switch.
2. Shift the selector lever to the Rposition.
The outside mirror on the side
where you pressed the select switch
will tilt downward.
NOTE
When any of the following condition is
met, the outer mirrors return to their
normal positions.
The vehicle power is switched to a
position other than ON.
The shift selector lever is shifted to a
position other than R.
The select switch is pressed again.
Automatic glare prevention function
*
In conjunction with the glare
prevention function of the auto-type
rearview mirror, only the driver's side
outside mirror reduces the light from
the headlights of on-coming vehicles.
Operation Function After Vehicle
power is Switched OFF
The outside mirrors can be operated
for about 40 seconds after the vehicle
power is switched from ON to off with
all doors closed. If any door is opened,
the outside mirrors will stop operating.
Driving
Mirrors
5-10*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04