height MAZDA CX90 2024 Owners Manual

Sit in the center of the seat and wear
seat belts properly.
Sitting too close to the side air bag
modules or placing hands on them, or
sleeping up against the door or
hanging out the windows is extremely
dangerous. The side and curtain air
bags inflate with great force and speed
directly expanding along the door on
the side the car is hit. Serious injury
could occur if someone is sitting too
close to the door or leaning against a
window, or if rear seat occupants grab
the sides of the front seatbacks. Give
the side and curtain air bags room to
work by sitting in the center of the seat
while the vehicle is moving with seat
belts worn properly.
Do not attach objects on or around
the area where air bags deploy.
Attaching objects to the air bags or
placing something in the area where
the air bags deploy is dangerous. In an
accident, an object could interfere with
air bag inflation and injure the
occupants. Furthermore, the bag could
be damaged causing gases to release.
Always keep the deployment area of
the air bag modules free of any
obstructions.
For example, you should not do any of
the following as it may interfere with
air bag deployment.
Do not put a covering on or lean
anything against areas such as the
dashboard and lower portion of the
instrument panel that blocks the
passenger front air bag and knee air
bags.
 Do not use seat covers on the front
seats and rear seats equipped with
in-seat side air bags.
 Do not hang any backpacks, bags or
pouches that cover the sides of the
seats that block the side air bags.Do not place any objects on the
assist grips. Only hang clothes
directly on the coat hooks.
Do not touch the components of the
supplemental restraint system after
the air bags have inflated.
Touching the components of the
supplemental restraint system after the
air bags have inflated is dangerous.
Immediately after inflation, they are
very hot. You could get burned.
Never install any front-end equipment
to your vehicle.
Installation of front-end equipment,
such as frontal protection bar
(kangaroo bar, bull bar, push bar, or
other similar devices), snowplow, or
winches, is dangerous. The air bag
crash sensor system could be affected.
This could cause air bags to inflate
unexpectedly, or it could prevent the
air bags from inflating during an
accident. Front occupants could be
seriously injured.
Do not modify the suspension.
Modifying the vehicle suspension is
dangerous. If the vehicle's height or
the suspension is modified, the vehicle
will be unable to accurately detect a
collision or roll-over accident resulting
in incorrect or unexpected air bag
deployment and the possibility of
serious injuries.
To prevent false detection by the air
bag sensor system, heed the
following.
 Do not use tires or wheels other than
those
specified for your Mazda:
Equipment to Protect Occupants/Pedestrians
SRS Air Bags
3-8
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04

To secure the outboard-third row seat
belts when not in use, insert the belts
into their seat belt retainers.
Adjusting the Seat Belt Height
If the seat belt contacts your neck or it
slips off the shoulder, adjust the seat
belt height.
To raise the seat belt
To lower the seat belt
1. Hold the seat belt anchor adjusterand press the knob down.
2. Make sure that the seat belt anchoradjuster is securely locked.
Seat Belt Extender
If your seat belt is not long enough,
even when fully extended, a seat belt
extender may be available to you at no
charge from your Authorized Mazda
Dealer.
This extender will be only for you and
for the particular vehicle and seat. Even
if it plugs into other seat belts, it may
not hold in the crit ical moment of a
crash.
When ordering an extender, only order
one that provides the necessary
additional length to fasten the seat belt
properly. Please contact your
Authorized Mazda Dealer for more
information.
NOTE
When not in use, remove the seat belt
extender and store it in the vehicle. If
the seat belt extender is left
connected, the seat belt extender
might get damaged as it will not retract
with the rest of the seat belt and can
easily fall out of the door when not in
use and be damaged. In addition, the
seat belt warning light will not
illuminate and function properly.
Equipment to Protect Occupants/Pedestrians
Seat Belts
3-26
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the FrontSeats
Driver's Seat
Manual seat
1. Seat Slide
2. Height Adjustment
3. Seat Recline
Powe r s eat
1. Seat Slide
2. Height Adjustment
3. Height Adjustment for Front Edgeof Seat Bottom
4. Seat Recline
5. Lumbar Support Adjustment
Equipment to Protect Occupants/Pedestrians
Front Seats
3-30
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Passenger's seat
Manual seat
1. Seat Recline
2. Height Adjustment*
3. Seat Slide
Po we r s eat
1. Seat Slide
2. Height Adjustment*
3. Height Adjustment for Front Edgeof Seat Bottom*
4. Seat Recline
Equipment to Protect Occupants/Pedestrians
Front Seats
*Some models.3-31
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Driving Position Memory*
The desired driving position can be
called up after programming the
position.
Driver’s seat position (Seat slide,
height adjustment, front edge of seat
bottom, seat recline)
Active driving display (Display
position, brightness level, display
information)
Outside mirror angleSteering Wheel (Power type) (Up
and down adjustment, forward and
backward adjustment)
Warnings and Cautionsfor Using the Driving Pos i t i on Me m or y
CAUTION
Do not place hand, fingers, or feet
around the bottom of the
seat or around the bottom of the
steering wheel while the seat memory
function is operating. The
seat or steering wheel moves
automatically while the seat memory
function is operating and hand, fingers,
or feet could get pinched and injured.
Equipment to Protect Occupants/Pedestrians
Front Seats
3-32*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Ve h i c l e s w i t h a f r o nt passenger air bag
have the following warning label. The
warning label reminds you not to put a
rear-facing child-restraint system on
the front passenger seat at any time.
Do not install a front-facing
child-restraint system on the front
passenger seat unless it is
unavoidable.
In a collision, the force of a deploying
air bag could cause serious injury or
death to the child. If installing a
front-facing child-restraint system on
the front passenger seat is
unavoidable, move the front passenger
seat as far back as possible and adjust
the seat bottom (height adjustable seat
bottom) to the highest position at
which the seat belt fastening the
child-restraint system is securely
tightened.
Seating a child in a child-restraint
system on the front passenger seat is
dangerous under certain conditions .
Your vehicle is equipped with front
passenger seat weight sensors. Even
with the front passenger seat weight
sensors, if you must use the front
passenger seat to seat a child, using a
child-restraint system on the front
passenger seat un der the following
conditions increases the danger of the
front passenger air bag deploying and
could result in serious injury or death
to the child.
 The front passenger air bag
deactivation indicator light does not
illuminate when seating a child in the
child-restraint system.
 Luggage or other items are placed on
the seat with the child in the
child-restraint system.
 A rear passenger or luggage pushing
or pulling down on the front
passenger seatback.
 Luggage or other items are placed on
the seatback or hung on the head
restraint.
 The seat is washed.
 Liquids are spilled on the seat.
 The front passenger seat is moved
backward, pushing into luggage or
other items placed behind it.
 The front passenger seatback
contacts the rear seat.
 Luggage or other items are placed
between the front passenger seat
and driver seat.
 An electric device is put on the front
passenger's seat.
 An additional electrical device, such
as a seat warmer is installed to the
surface of the front passenger seat.
 Any accessories, which might
increase the total seated weight on
the front passenger seat, are
attached to the front passenger seat.
Equipment to Protect Occupants/Pedestrians
Child-restraint Systems
3-53
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Convenient Ways to Usethe Power Liftgate
The liftgate fully-open position can be
changed according to the height of a
garage.
Set the desired fully-open position of
the liftgate at the position where it is
open more than halfway. The liftgate
fully-open position cannot be changed
to a position that is less than half
open.
Changing the fully-open position
1. Stop the liftgate at the desired position.
2. Press and hold the power liftgate close switch for 3 seconds or
longer.
A warning sound is activated 2
times to indicate that the position
change has been completed.
Resetting the set fully-open position
1. Open the liftgate.
2. Press and hold the power liftgate close switch for 7 seconds or
longer.
A warning sound is activated 3
times to indicate that the reset has
been completed.
NOTE
After 3 seconds have passed since the
switch was pressed, a warning sound is
activated 2 times to indicate that the
liftgate fully-open position has
changed. Continuously press the
switch for 7 seconds to complete the
reset.
Opening/closing
Liftgate
4-25
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the Hood
Opening the Hood
1. Pull the hood release handle.The hood will raise slightly.
2. When the hood is raised by about40 cm, it opens automatically.
When the hood is opened to a
certain position, it is held open.
NOTE
If you push up from the position where
the hood has stopped, you can open
the hood further.
Closing the Hood
1. Make sure that there are no toolsleft in the engine compartment.
2. Lower the hood slowly and release it from a height of about 35 cm
without applying excessive force.
The hood closes.
NOTE
When the hood is closed by pushing it
with a hand, it may not be locked
normally. If the hood does not close
completely, open it again and operate
it slightly more strongly using the same
method.
Opening/closing
Hood
4-27
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Forward Sensing Camera(FSC)
*
The Forward Sensing Camera (FSC)
determines the conditions ahead of
the vehicle and detects the white
(yellow) lines on the traffic lane.
1. Forward Sensing Camera (FSC)

The following systems utilize the
Forward Sensing Camera (FSC).
High Beam Control System (HBC)Lane Departure Warning System
(LDWS)
Traffic Sign Recognition System (TSR)Distance & Speed Alert (DSA)Driver Attention Alert (DAA)Mazda Radar Cruise Control
(MRCC)
Cruising & Traffic Support (CTS)Lane-keep Assist System (LAS)Emergency Lane Keeping (ELK)Smart Brake Support (SBS) forward
drive detection
WARNING
Do not modify the suspension:
If the vehicle height or inclination is
changed, the system will not be able to
correctly detect vehicles ahead. This
will result in the system not operating
normally or mistakenly operating,
which could cause a serious accident.
CAUTION
Heed the following cautions to operate
the system correctly.
Do not hit or apply strong force to
the Forward Sensing Camera (FSC)
or the area around it. If the Forward
Sensing Camera (FSC) received a
strong impact, stop using the
following systems and consult an
Authorized Mazda Dealer.
 High Beam Control System (HBC)
 Lane Departure Warning System
(LDWS)
 Traffic Sign Recognition System
(TSR)
 Distance & Speed Alert (DSA)
 Driver Attention Alert (DAA)
 Mazda Radar Cruise Control
(MRCC)
 Cruising & Traffic Support (CTS)
 Lane-keep Assist System (LAS)
 Emergency Lane Keeping (ELK)
 Smart Brake Support (SBS) forward
drive detection
 Do not remove the Forward Sensing
Camera (FSC) cover.
 Be careful not to scratch the Forward
Sensing Camera (FSC) lens or allow
it to get dirty. Also, do not take the
camera apart. Otherwise, it may
cause a malfunction or
mis-operation.
 The direction of the Forward Sensing
Camera (FSC) has been
finely
adjusted, therefore do not change
the installation position or remove
the Forward Sensing Camera (FSC).
Otherwise, it may cause a
malfunction or mis-operation.
 Consult an Authorized Mazda Dealer
regarding cleaning of the camera
lens.
 Do not place objects on the
dashboard which
reflect light.
Driving
Forward Sensing Camera (FSC)
*Some models.5-127
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04

When the Forward Sensing Camera
(FSC) detects that the windshield is
dirty or foggy, the functions related
to the Forward Sensing Camera
(FSC) are temporarily stopped. In
this case, the following warning
indications turn on. However, this
does not indicate a problem.
Remove the dirt from the windshield
or press the windshield defroster
switch.
HBC warning indicationi-ACTIVSENSE warning indicationSBS OFF indication
Detection of pedestrians
The Forward Sensing Camera (FSC)
detects pedestrians when all of the
following conditions are met.
The height of a pedestrian is about 1
to 2 meters.
The outline of a pedestrian is
recognized such as the head, both
shoulders, or the feet.
The Forward Sensing Camera (FSC)
may not be able to detect pedestrians
when any of the following conditions is
met.
There are multiple pedestrians.A pedestrian is close to a separate
object.
A pedestrian is crouching , lying, or
slouching.
A pedestrian suddenly jumps into
the road.
A pedestrian is holding something
(such as an open umbrella or large
baggage).
A pedestrian blends into the
background (such as in a dark
location at night or by wearing
clothes matching the background
color).
Detection of objects
When any of the following conditions
is met, the Forward Sensing Camera
(FSC) may not be able to detect target
objects correctly, and each system may
not operate normally.
You are driving your vehicle at the
same speed as the vehicle ahead.
The headlights of your vehicle are not
turned on during the night or in a
tunnel.
The target object is in the blind spot
of the Forward Sensing Camera
(FSC).
A person or object bursts onto the
road from the shoulder or cuts right
in front of you.
The distance between your vehicle
and the target object is extremely
close or extremely far.
You change the course and approach
a target object.
The target object (vehicle ahead,
white line (yellow line), sign) is dirty
or worn.
A vehicle ahead has a special shape
(such as a vehicle carrier).
A vehicle ahead is a truck with a low
loading platform.
A vehicle ahead has an extremely
low or high profile.
A vehicle ahead is outside the
illumination range of the headlights.
The illumination area of the taillights
of the vehicle ahead is small.
The taillights of a vehicle ahead are
dim or turned off.
The headlights of an on-coming
vehicle are dim or turned off.
Under bad weather conditions (rain,
fog , and snow).
Front visibility is reduced (due to a
vehicle ahead casting off water,
snow, or sand).
Driving
Forward Sensing Camera (FSC)
5-129
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04