MAZDA MODEL 2 2011 User Guide

Black plate (11,1)
Front
Hood .................................................................................................................. page 3-20
Windshield wiper blades .................................................................................... page 8-19
Door lock ............................................................................................................. page 3-8
Fuel-filler lid ...................................................................................................... page 3-18
Tires ................................................................................................................... page 8-26
Light bulbs ......................................................................................................... page 8-32
Your Vehicle at a Glance
Exterior Overview
1-5The equipment and installation position varies by vehicle
Mazda2_8BX2-EA-10K_Edition2 Page11
Thursday, December 23 2010 4:47 PM
Form No.8BX2-EA-10K

Black plate (12,1)
Rear
Rear wiper blade ................................................................................................ page 8-21
Liftgate ............................................................................................................... page 3-11
Antenna ............................................................................................................... page 6-9
Child safety lock ................................................................................................ page 3-11
Outside mirror .................................................................................................... page 3-24
Tires ................................................................................................................... page 8-26
Light bulbs ......................................................................................................... page 8-32
1-6
Your Vehicle at a Glance
The equipment and installation position varies by vehicle
Exterior Overview
Mazda2_8BX2-EA-10K_Edition2 Page12
Thursday, December 23 2010 4:47 PM
Form No.8BX2-EA-10K

Black plate (13,1)
2Essential Safety Equipment
Use of safety equipment, including seats, seat belt system, child-restraint
systems and SRS air bags.
Seats ............................................................................................... 2-2Front Seats ................................................................................ 2-2
Rear Seat ................................................................................... 2-4
Head Restraints ......................................................................... 2-7
Seat Belt Systems .......................................................................... 2-9 Seat Belt Precautions ................................................................ 2-9
Seat Belt .................................................................................. 2-13
Front Seat Belt Pretensioner and Load Limiting Systems ....... 2-15
Seat Belt Extender ................................................................... 2-17
Seat Belt Warning Light/Beep ................................................ 2-19
Child Restraint ............................................................................ 2-21 Child Restraint Precautions ..................................................... 2-21
Child-Restraint System Installation Position .......................... 2-25
Installing Child-Restraint Systems .......................................... 2-26
LATCH Child-Restraint Systems ............................................ 2-32
SRS Air Bags ............................................................................... 2-36 Supplemental Restraint System (SRS) Precautions ................ 2-36
Supplemental Restraint System Components ......................... 2-41
How the SRS Air Bags Work .................................................. 2-42
SRS Air Bag Deployment Criteria .......................................... 2-47
Limitations to SRS Air Bag .................................................... 2-48
Driver and Front Passenger Occupant Classification
System ..................................................................................... 2-50
Monitoring and Maintenance .................................................. 2-55
2-1
Mazda2_8BX2-EA-10K_Edition2 Page13
Thursday, December 23 2010 4:47 PM
Form No.8BX2-EA-10K

Black plate (14,1)
Front Seats
WARNING
Do not modify or replace the front
seats:Modifying or replacing the front seats
such as replacing the upholstery or
loosening any bolts is dangerous. The
front seats contain air bag
components essential to the
supplemental restraint system. Such
modifications could damage the
supplemental restraint system and
result in serious injury. Consult an
Authorized Mazda Dealer if there is
any need to remove or reinstall the
front seats.
Do not drive with damaged front seats: Driving with damaged front seats is
dangerous. A collision, even one not
strong enough to inflate the air bags,
could damage the front seats which
contain essential air bag
components. If there was a
subsequent collision, an air bag may
not deploy which could lead to
injuries. Always have an Authorized
Mazda Dealer inspect the front seats,
front seat belt pretensioners and air
bags after a collision.
Make sure the adjustable components
of a seat are locked in place: Adjustable seats and seatbacks that
are not securely locked are
dangerous. In a sudden stop or
collision, the seat or seatback could
move, causing injury. Make sure the
adjustable components of the seat
are locked in place by attempting to
slide the seat forward and backward
and rocking the seatback. Adjust the driver's seat only when the
vehicle is stopped:
Adjusting the driver's seat while the
vehicle is moving is dangerous. The
driver could lose control of the vehicle
and have an accident.
CAUTION
Be careful not to place your hands
and fingers around moving parts of
the front seat when adjusting the
seat positions to prevent injury.
qSeat Slide
To move a seat forward or backward, raise
the lever and slide the seat to the desired
position and release the lever.
Make sure the lever returns to its original
position and the seat is locked in place by
attempting to push it forward and
backward.
2-2
Essential Safety Equipment
Seats
Mazda2_8BX2-EA-10K_Edition2 Page14
Thursday, December 23 2010 4:47 PM
Form No.8BX2-EA-10K

Black plate (15,1)
qSeat Recline
WARNING
Do not drive with either front seat
reclined:
Sitting in a reclined position while the
vehicle is moving is dangerous
because you do not get the full
protection from seat belts. During
sudden braking or a collision, you
can slide under the lap belt and
suffer serious internal injuries. For
maximum protection, sit well back
and upright.
Always sit in the passenger seat
properly with the seatback upright and
feet on the floor: Your front passenger seat has weight
sensors, sitting in the front passenger
seat improperly out of position or
with the seatback reclined too far
while the vehicle is moving is
dangerous as it can take off weight
from the seat bottom and affect the
weight determination of the front
passenger sensing system. As a result
the front passenger will not have the
supplementary protection of the air
bag and seat belt pretensioner, which
could result in serious injury. Always
sit upright against the seatback with
your feet on the floor. Do not drive with the seatback
unlocked:
All of the seatbacks play an
important role in your protection in a
vehicle. Leaving the seatback
unlocked is dangerous as it can allow
passengers to be ejected or thrown
around and baggage to strike
occupants in a sudden stop or
collision, resulting in severe injury.
After adjusting the seatback at any
time, even when there are no other
passengers, rock the seatback to
make sure it is locked in place.
To change the seatback angle, lean
forward slightly while raising the lever.
Then lean back to the desired position and
release the lever.
Make sure the lever returns to its original
position and the seatback is locked in
place by attempting to push it forward and
backward.
Essential Safety Equipment
Seats
2-3
Mazda2_8BX2-EA-10K_Edition2 Page15
Thursday, December 23 2010 4:47 PM
Form No.8BX2-EA-10K

Black plate (16,1)
CAUTION
When returning a rear-reclined
seatback to its upright position,
make sure you hold onto the
seatback with your other hand while
operating the lever. If the seatback is
not supported, it will flip forward
suddenly and could cause injury.
qHeight Adjustment (Driver's Seat)
To adjust the seat height, move the lever
up or down.
DownUp
Rear Seat
WARNING
Do not stack cargo higher than the
seatbacks or place articles on the rear
package tray:
Stacking luggage or other cargo
higher than the seatbacks, and
placing articles on the rear package
tray is dangerous. During sudden
braking or a collision, objects can fly
around and become projectiles that
may hit and injure passengers.
Make sure luggage and cargo is
secured before driving: Not securing cargo while driving is
dangerous as it could move or be
crushed during sudden braking or a
collision and cause injury.
Make sure the adjustable components
of a seat are locked in place: Adjustable seats that are not securely
locked are dangerous. In a sudden
stop or collision, the seat or seatback
could move, causing injury.
Do not drive with the seatback
unlocked: All of the seatbacks play an
important role in your protection in a
vehicle. Leaving the seatback
unlocked is dangerous as it can allow
passengers to be ejected or thrown
around and baggage to strike
occupants in a sudden stop or
collision, resulting in severe injury.
After returning the seatback at any
time, even when there are no other
passengers, rock the seatback to
make sure it is locked in place.
2-4
Essential Safety Equipment
Seats
Mazda2_8BX2-EA-10K_Edition2 Page16
Thursday, December 23 2010 4:47 PM
Form No.8BX2-EA-10K

Black plate (17,1)
Never allow a passenger to sit or stand
on the folded seatback while the
vehicle is moving:Driving with a passenger on the
folded seatback is dangerous.
Allowing a child to sit up on the
folded seatback while the vehicle is
moving is particularly dangerous. In
a sudden stop or even a minor
collision, a child not in a proper seat
or child-restraint system and seat
belt could be thrown forward, back
or even out of the vehicle resulting in
serious injuries or death. The child in
the baggage area could be thrown
into other occupants and cause
serious injury.
CAUTION
Be careful not to place your hands
and fingers around moving parts of
the rear seat when adjusting the seat
positions to prevent injury.
NOTE
When returning a rear seat to its original
position, also replace the seat belt to its
normal position. Verify that the seat belt pulls
out and retracts.
q Split-Folding Rear Seatback
The seatbacks can be folded down to
provide more space in the luggage
compartment.
To fold the seatbacks
CAUTION
When operating the rear seatback
knob, make sure you support the
seatback with your hand. If the
seatback is not supported with your
hand, it will flip forward suddenly
and could cause injury to the finger
that pushes the rear seatback knob
down.
1. Lower the head restraint all the way down (page 2-7).
2. Support the seatback with your hand.
3. Push the rear seatback knob down.
Essential Safety Equipment
Seats
2-5
Mazda2_8BX2-EA-10K_Edition2 Page17
Thursday, December 23 2010 4:47 PM
Form No.8BX2-EA-10K

Black plate (18,1)
4. Secure the rear seat belt in the belt clip.
Belt clip
To return the seatbacks to the upright
position
WARNING
Always make sure the seat belts are
fully pulled out from under the
seatbacks:A seat belt caught under a seatback
after the seatback is returned to its
upright position is dangerous. In a
collision or sudden stop, the seat belt
cannot provide adequate protection.
When returning the seatback to the
upright position, make sure there is no
red indication: A rear seatback not fully returned
and locked in the upright position is
dangerous. Sudden stops or
maneuvering could cause a seatback
to flip forward suddenly resulting in
injury. If the red indicator is visible on
the back of the rear seatback knob,
the seatback is not locked in the
upright position.
Locked position
Unlocked position
Red indicator
2-6
Essential Safety Equipment
Seats
Mazda2_8BX2-EA-10K_Edition2 Page18
Thursday, December 23 2010 4:47 PM
Form No.8BX2-EA-10K

Black plate (19,1)
1. Verify that the seat belt is secured inthe belt clip.
Belt clip
2. Lift the seatbacks upright.
3. Make sure that the seat belt is neitherstuck in the rear seat nor twisted, then
remove the seat belt from the belt clip.
Head Restraints
Your vehicle is equipped with head
restraints on all outboard seats. The head
restraints are intended to help protect you
and the passengers from neck injury.
WARNING
Always drive with the head restraints
installed when seats are being used
and make sure they are properly
adjusted:
Driving with the head restraints
adjusted too low or removed is
dangerous. With no support behind
your head, your neck could be
seriously injured in a collision.
Height adjustment
To raise a head restraint, pull it up to the
desired position.
To lower the head restraint, press the stop-
catch release, then push the head restraint
down.
Adjust the head restraint so that the top is
even with the top of the passenger's ears,
never the passenger's neck to prevent
injury.
Front outboard seat
Essential Safety Equipment
Seats
2-7
Mazda2_8BX2-EA-10K_Edition2 Page19
Thursday, December 23 2010 4:47 PM
Form No.8BX2-EA-10K

Black plate (20,1)
Rear outboard seat
Removal/Installation
To remove the head restraint, pull it up
while pressing the stop-catch.
To install the head restraint, press the
uprights into the holes while pressing the
stop-catch.
WARNING
Always drive with the head restraints
set up when seats are being used and
make sure they are properly set up:Driving with the head restraints not
set up is dangerous. With no support
behind your head, your neck could be
seriously injured in a collision.
2-8
Essential Safety Equipment
Seats
Mazda2_8BX2-EA-10K_Edition2 Page20
Thursday, December 23 2010 4:47 PM
Form No.8BX2-EA-10K