tow MAZDA MODEL 2 2019 (in English) User Guide
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2019, Model line: MODEL 2, Model: MAZDA MODEL 2 2019Pages: 759, PDF Size: 13.38 MB
Page 305 of 759
& $ 8 7 , 2 1
In the following cases, turn the system off to prevent a mis-operation:
¾The vehicle is being towed or when towing another vehicle.
¾The vehicle is on a chassis roller.
¾When driving on rough roads such as in areas of dense grass or off-road.
Refer to Stopping the Advanced Smart City Brake Support (Advanced SCBS) System Operation
on page 4-166 on how to turn off the Advanced SCBS system.
NOTE
xThe Advanced SCBS system will operate under the following conditions.
xThe engine is running.
xThe Smart City Brake Support (SCBS) warning light(amber) does not illuminate.
x(Object is vehicle ahead)
The vehicle speed is between about 4 to 80 km/h (2 to 50 mph).
x(Object is a pedestrian)
The vehicle speed is between about 10 to 80 km/h (6.2 to 50 mph).
xThe Advanced SCBS system is not turned off.
xUnder the following conditions, the Advanced SCBS system may not operate normally:
xThe Advanced SCBS system will not operate if the driver is deliberately performing
driving operations (accelerator pedal and steering wheel).
xIf there is the possibility of partial contact with a vehicle ahead.
xThe vehicle is driven on a slippery road surface such as wet roads or icy or snow-bound
roads.
xThe braking performance is adversely affected due to cold temperatures or wet brakes.
xThe vehicle is driven at the same speed as the vehicle ahead.
xThe accelerator pedal is depressed.
xThe brake pedal is depressed.
xThe steering wheel is being operated.
xThe selector lever is being operated.
xIn the following cases, the Advanced SCBS may operate.
xObjects on the road at the entrance to a curve.
xVehicles passing in the opposite lane while making a curve.
xWhen passing through a toll gate.
xWhen passing through low gates, narrow gates, car washing machines, or tunnels.
xIf you suddenly come close to a vehicle ahead.
x2-wheeled vehicles, animals, or standing trees.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
Page 309 of 759
& $ 8 7 , 2 1
In the following cases, turn the system off to prevent a mis-operation:
¾The vehicle is being towed or when towing another vehicle.
¾The vehicle is on a chassis roller.
¾When driving on rough roads such as in areas of dense grass or off-road.
Refer to Stopping the Smart City Brake Support [Forward] (SCBS F) system Operation on page
4-170 on how to turn off the SCBS F system.
NOTE
xThe SCBS F system will operate under the following conditions.
xThe engine is running.
xThe Smart Brake Support/Smart City Brake Support (SBS/SCBS) system warning light
(amber) does not illuminate.
x(Rear-end collision warning)
The vehicle speed is about 4 to 80 km/h (2 to 50 mph).
x(Brake control (Smart City Brake Support (SCBS) brake))
The vehicle speed is about 4 to 30 km/h (2 to 18 mph).
xThe SCBS F system is not turned off.
xUnder the following conditions, the SCBS F system may not operate normally:
xThe SCBS F system will not operate if the driver is deliberately performing driving
operations (accelerator pedal and steering wheel).
xIf there is the possibility of partial contact with a vehicle ahead.
xThe vehicle is driven on a slippery road surface such as wet roads or icy or snow-bound
roads.
xThe braking performance is adversely affected due to cold temperatures or wet brakes.
xThe vehicle is driven at the same speed as the vehicle ahead.
xThe accelerator pedal is depressed.
xThe brake pedal is depressed.
xThe steering wheel is being operated.
xThe selector lever is being operated.
xIn the following cases, the Forward Sensing Camera (FSC) determines that there is a
vehicle ahead and the SCBS F may operate.
xObjects on the road at the entrance to a curve.
xVehicles passing in the opposite lane while making a curve.
xMetal objects, bumps, or protruding objects on the road.
xWhen passing through a toll gate.
xWhen passing through low gates, narrow gates, car washing machines, or tunnels.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
Page 315 of 759
xIn the following cases, the ultrasonic sensors (rear) cannot detect obstructions correctly
and the SCBS R may not operate.
xSomething is stuck on the bumper near an ultrasonic sensor (rear).
xThe steering wheel is turned sharply, or the brake or accelerator pedal is operated.
xThere is another obstruction near one obstruction.
xDuring inclement weather such as rain, fog and snow.
xHigh or low humidity.
xHigh or low temperatures
xStrong winds.
xThe path of travel is not flat.
xHeavy luggage is loaded in the luggage compartment or on the rear seat.
xObjects such as a wireless aerial, fog light, or illuminated number plate is installed
near an ultrasonic sensor (rear).
xThe orientation of an ultrasonic sensor (rear) has deviated for reasons such as a
collision.
xThe vehicle is affected by other sound waves such as the horn, engine noise, ultrasonic
sensor of another vehicle.
xIn the following cases, an ultrasonic sensor (rear) may detect something as a target
obstruction which could cause the SCBS R system to operate.
xDriving on a steep slope.
xWheel blocks.
xHanging curtains, gate poles such as at toll gates and railroad crossing.
xWhen travelling near objects such as foliage, barriers, vehicles, walls, and fences along
a road.
xWhen driving off-road in areas where there is grass and forage.
xWhen passing through low gates, narrow gates, car washing machines, and tunnels.
xA towing bar is installed or a trailer is connected.
x(Manual transaxle)
If the vehicle is stopped by the Smart City Brake Support (SCBS) operation and the clutch
pedal is not depressed, the engine stops.
xThe Smart City Brake Support (SCBS) warning indication (amber) turns on when the
system has a malfunction.
Refer to Warning Lights on page 4-39.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
Page 317 of 759
6 P D U W % U D N H 6 X S S R U W
6 % 6
7 K H 6 % 6 V \ V W H P D O H U W V W K H G U L Y H U R I D
S R V V L E O H F R O O L V L R Q X V L Q J D G L V S O D \ D Q G
Z D U Q L Q J V R X Q G L I W K H U D G D U V H Q V R U I U R Q W
D Q G W K H ) R U Z D U G 6 H Q V L Q J & D P H U D ) 6 &
G H W H U P L Q H W K D W W K H U H L V W K H S R V V L E L O L W \ R I D
F R O O L V L R Q Z L W K D Y H K L F O H D K H D G Z K L O H W K H
Y H K L F O H L V E H L Q J G U L Y H Q D W D E R X W N P K R U
I D V W H U P S K R U I D V W H U ) X U W K H U P R U H L I
W K H U D G D U V H Q V R U I U R Q W D Q G W K H ) R U Z D U G
6 H Q V L Q J & D P H U D ) 6 & G H W H U P L Q H V W K D W D
F R O O L V L R Q L V X Q D Y R L G D E O H W K H D X W R P D W L F
E U D N H F R Q W U R O L V S H U I R U P H G W R U H G X F H
G D P D J H L Q W K H H Y H Q W R I D F R O O L V L R Q
, Q D G G L W L R Q Z K H Q W K H G U L Y H U G H S U H V V H V W K H
E U D N H S H G D O W K H E U D N H V D U H D S S O L H G I L U P O \
D Q G T X L F N O \ W R D V V L V W % U D N H $ V V L V W 6 % 6
E U D N H D V V L V W
: $ 5 1 , 1 *
Do not rely completely on the SBS system
and always drive carefully:
The SBS is designed to reduce damage in
the event of a collision, not avoid an
accident. The ability to detect an
obstruction is limited depending on the
obstruction, weather conditions, or traffic
conditions. Therefore, if the accelerator
pedal or brake pedal is mistakenly
operated it could result in an accident.
Always verify the safety of the surrounding
area and depress the brake pedal or
accelerator pedal while keeping a safer
distance from vehicles ahead or on-coming
vehicles.
& $ 8 7 , 2 1
In the following cases, turn the system off
to prevent a mis-operation:
¾The vehicle is being towed or when
towing another vehicle.
¾The vehicle is on a chassis roller.
¾When driving on rough roads such as in
areas of dense grass or off-road.
NOTE
xThe SBS system operates when all of the
following conditions are met:
xThe ignition is switched ON.
xThe SBS system is on.
xThe vehicle speed is about 15 km/h or
faster (10 mph or faster).
xThe relative speed between your
vehicle and the vehicle ahead is about
15 km/h or faster (10 mph or faster).
xThe Dynamic Stability Control (DSC)
is not operating.
xThe SBS system may not operate under
the following conditions:
xIf the vehicle is accelerated rapidly
and it comes close to a vehicle ahead.
xThe vehicle is driven at the same
speed as the vehicle ahead.
xThe accelerator pedal is depressed.
xThe brake pedal is depressed.
xThe steering wheel is being operated.
xThe selector lever is being operated.
xThe direction indicator is being used.
xWhen the vehicle ahead is not
equipped with tail lights or the tail
lights are turned off.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
6 R P H P R G H O V
Page 349 of 759
xWhen driving next to walls with no patterning (including fences and longitudinally
striped walls).
xThe tail lights of the vehicle ahead are turned off.
xA vehicle is outside the illumination range of the headlights.
xThe vehicle is making a sharp turn, or ascending or descending a steep slope.
xEntering or exiting a tunnel.
xHeavy luggage is loaded causing the vehicle to tilt.
xStrong light is shone at the front of the vehicle (back light or high-beam light from
on-coming vehicles).
xThere are many light emitters on the vehicle ahead.
xWhen the vehicle ahead is not equipped with tail lights or the tail lights are turned off at
nighttime.
xElongated luggage or cargo is loaded onto installed roof rails and covers the Forward
Sensing Camera (FSC).
xExhaust gas from the vehicle in front, sand, snow, and water vapour rising from
manholes and grating, and water splashed into the air.
xWhen towing a malfunctioning vehicle.
xThe vehicle is driven with tyres having significantly different wear.
xThe vehicle is driven on down slopes or bumpy roads.
xThere are water puddles on the road.
xThe surroundings are dark such as during the night, early evening, or early morning, or
in a tunnel or indoor parking lot.
xThe illumination brightness of the headlights is reduced or the headlight illumination is
weakened due to dirt or a deviated optical axis.
xThe target object enters the blind spot of the Forward Sensing Camera (FSC).
xA person or object bursts onto the road from the shoulder or cuts right in front of you.
xYou change lanes and approach a vehicle ahead.
xWhen driving extremely close to the target object.
xTyre chains or a temporary spare tyre is installed.
xThe vehicle ahead has a special shape. For example, a vehicle towing a trailer house or
a boat, or a vehicle carrier carrying a vehicle with its front pointed rearward.
: K H Q ' U L Y L Q J
L $ & 7 , 9 6 ( 1 6 (
Page 378 of 759
xUnder extremely hot or cold weather conditions.
xThe vehicle is driven on bumps, inclines, gravel, or grass covered roads.
xAnything which generates ultrasound is near the vehicle, such as another vehicle's
horn, the engine sound of a motorcycle, the air brake sound of a large-sized vehicle, or
another vehicle's sensors.
xThe vehicle is driven in heavy rain or in road conditions causing water-splash.
xA commercially-available wing pole or an aerial for a radio transmitter is installed to
the vehicle.
xThe vehicle is moving towards a tall or square curbstone.
xAn obstruction is too close to the sensor.
xObstructions under the bumper may not be detected. Obstructions that are lower than the
bumper or thin which may have been initially detected may no longer be detected as the
vehicle approaches more closely to the obstruction.
xThe following types of obstructions may not be detected:
xThin objects such as wire or rope
xThings which absorb sonic waves easily such as cotton or snow
xAngular shaped objects
xVery tall objects, and those which are wide at the top
xSmall, short objects
xAlways have the system inspected at an expert repairer (we recommend an Authorised
Mazda Repairer) if any shock is applied to the bumpers, even in a minor accident. If the
sensors are deviated, they cannot detect obstructions.
x(With front sensor and front corner sensor)
The system may have a malfunction if the beep does not operate or the indicator light
does not illuminate when the park assist sensors switch is turned on. Consult an expert
repairer (we recommend an Authorised Mazda Repairer).
x(Without front sensor and front corner sensor)
The system may have a malfunction if the beep does not operate. Consult an expert
repairer (we recommend an Authorised Mazda Repairer).
x(With front sensor and front corner sensor)
The system may have a malfunction if the beep sound which indicates a system
malfunction is heard and the indicator light flashes. Consult an expert repairer (we
recommend an Authorised Mazda Repairer).
xThe beeper which indicates a system malfunction may not be heard if the ambient
temperature is extremely cold, or mud, ice, or snow adheres to the sensor area. Remove
any foreign material from the sensor area.
: K H Q ' U L Y L Q J
3 D U N L Q J 6 H Q V R U 6 \ V W H P
Page 591 of 759
& $ 8 7 , 2 1
To prevent damage to the windscreen
let the wiper arm down easily, do not
let it slap down on the windscreen.
+ R O G W K H H Q G R I W K H U X E E H U D Q G S X O O
X Q W L O W K H W D E V D U H I U H H R I W K H P H W D O
V X S S R U W
Metal support
Ta b
5 H P R Y H W K H P H W D O V W L I I H Q H U V I U R P H D F K
E O D G H U X E E H U D Q G L Q V W D O O W K H P L Q W K H
Q H Z E O D G H
& $ 8 7 , 2 1
¾Do not bend or discard the
stiffeners.
You need to use them again.
¾If the metal stiffeners are switched,
the blade's wiping efficiency could be
reduced.
So do not use the driver's side metal
stiffeners on the passenger's side, or
vice versa.
¾Be sure to reinstall the metal
stiffeners in the new blade rubber so
that the curve is the same as it was in
the old blade rubber.
& D U H I X O O \ L Q V H U W W K H Q H Z E O D G H U X E E H U
7 K H Q L Q V W D O O W K H E O D G H D V V H P E O \ L Q W K H
U H Y H U V H R U G H U R I U H P R Y D O
NOTE
Install the blade so that the tabs are
toward the bottom of the wiper arm.
▼▼ 5 H S O D F L Q J 5 H D U : L Q G R Z : L S H U
% O D G H + D W F K E D F N
: K H Q W K H Z L S H U Q R O R Q J H U F O H D Q V Z H O O W K H
E O D G H L V S U R E D E O \ Z R U Q R U F U D F N H G
5 H S O D F H L W
& $ 8 7 , 2 1
To prevent damage to the wiper arm and
other components, do not move the wiper
by hand.
0 D L Q W H Q D Q F H D Q G & D U H
2 Z Q H U 0 D L Q W H Q D Q F H
Page 628 of 759
![MAZDA MODEL 2 2019 (in English) User Guide 3 D U N L Q J L Q D Q ( P H U J H Q F \
7 K H K D ] D U G Z D U Q L Q J O L J K W V V K R X O G D O Z D \ V
E H X V H G Z K H Q \ R X V W R S R Q R U Q H D U D
U R](/img/28/15645/w960_15645-627.png "MAZDA MODEL 2 2019 (in English) User Guide 3 D U N L Q J L Q D Q ( P H U J H Q F \
7 K H K D ] D U G Z D U Q L Q J O L J K W V V K R X O G D O Z D \ V
E H X V H G Z K H Q \ R X V W R S R Q R U Q H D U D
U R")
3 D U N L Q J L Q D Q ( P H U J H Q F \
7 K H K D ] D U G Z D U Q L Q J O L J K W V V K R X O G D O Z D \ V
E H X V H G Z K H Q \ R X V W R S R Q R U Q H D U D
U R D G Z D \ L Q D Q H P H U J H Q F \
7 K H K D ] D U G Z D U Q L Q J O L J K W V Z D U Q R W K H U
G U L Y H U V W K D W \ R X U Y H K L F O H L V D W U D I I L F K D ] D U G
D Q G W K D W W K H \ P X V W W D N H H [ W U H P H F D X W L R Q
Z K H Q Q H D U L W
' H S U H V V W K H K D ] D U G Z D U Q L Q J I O D V K H U D Q G D O O
W K H G L U H F W L R Q L Q G L F D W R U V Z L O O I O D V K 7 K H
K D ] D U G Z D U Q L Q J L Q G L F D W R U O L J K W V L Q W K H
L Q V W U X P H Q W F O X V W H U I O D V K V L P X O W D Q H R X V O \
NOTE
xThe direction indicators do not work
when the hazard warning lights are on.
xCheck local regulations about the use of
hazard warning lights while the vehicle
is being towed to verify that it is not in
violation of the law.
5 R D G V L G H ( P H U J H Q F \
7 U L D Q J O H 5 H W D L Q L Q J 6 W U D S
+ D W F K E D F N
. H H S W K H U R D G V L G H H P H U J H Q F \ W U L D Q J O H L Q
W K H U L J K W V L G H W U L P D Q G V H F X U H L W Z L W K W K H
V W U D S
Strap
, I 7 U R X E O H $ U L V H V
3 D U N L Q J L Q D Q ( P H U J H Q F \
6 R P H P R G H O V
Page 630 of 759
6 S D U H W \ U H D Q G W R R O V D U H V W R U H G L Q W K H O R F D W L R Q V L O O X V W U D W H G L Q W K H G L D J U D P
JackTool bag Spare tyre
Towing eyelet Jack point attachment
Spare tyre hold-down bolt(Type B) Saloon
(Type A)
Wheel brace
*1*
1
The jack point attachment can be used by vehicle repair shops and road assistance services.
Consult an Authorised Mazda Repairer for details.
Jack lever
Some models. Screwdriver
Wrench JackTool bag Spare tyre
Towing eyelet Jack point attachment
Spare tyre hold-down bolt
*1
Wheel braceJack lever Screwdriver
Wrench
, I 7 U R X E O H $ U L V H V
) O D W 7 \ U H
Page 631 of 759
(Type C)
Jack lever Towing eyelet
Emergency flat tyre repair kitJack point attachment*1
*1
The jack point attachment can be used by vehicle repair shops and road assistance services.
Consult an Authorised Mazda Repairer for details.
, I 7 U R X E O H $ U L V H V
) O D W 7 \ U H